Official GIGA P35-S3/DS3/DS3R/DS3P/DS4/DQ6 bios/info thread

[GazC]

alright, Which ram ur using btw sorry forgot to mention it

*edit: few post ahead:

I'm using OCZ 7200 Platinum (D9s) and if I overclock it too much or do something stupid it goes into the reboot loop and then comes back on at a safe setting. I think this is normal for the board and certainly beats resetting the cmos everytime I screw up an overclock.

[xwoodoo]

Can someone tell when is a new bios going to appear and whatever if it will allow selecting straps?I have an P35-Dq6 and it works flawlessly with Mushkin 8500 kits but unfortunely the memory performance has to be improved.If the new bios will allow changing straps that is going to be just great Excellent board overall

[CERO]

Can someone tell when is a new bios going to appear and whatever if it will allow selecting straps?I have an P35-Dq6 and it works flawlessly with Mushkin 8500 kits but unfortunely the memory performance has to be improved.If the new bios will allow changing straps that is going to be just great Excellent board overall

Ah oke do u have any overclocking probs then with these RAMS, I mean they can run on p965 @ 800mhz with 3-3-3-8 / 3-4-4-8, and what is the highest clock with lowest timing u have achieved with this ram on this board?

[xwoodoo]

450 mhz with 4-3-3-8 and 625 mhz with 5-5-5-15 at 2.3v from bios.I now run them at 514 mhz 4-4-4-12 with all sub-timings streched at the limit.And i mean Orthos-stable,daily use.

http://www.crazypc.ro/forum/attachme...8&d=1180014241

This for 625,i also could do 640 mhz at 2.45v but not for daily use,just benching.

[CERO]

450 mhz with 4-3-3-8 and 625 mhz with 5-5-5-15 at 2.3v from bios.I now run them at 514 mhz 4-4-4-12 with all sub-timings streched at the limit.And i mean Orthos-stable,daily use.

http://www.crazypc.ro/forum/attachme...8&d=1180014241

This for 625,i also could do 640 mhz at 2.45v but not for daily use,just benching.

Ah thnx for the info, but could u maybe try if u can do the CL3 @ 800mhz ? would be nice to know, thnx

[Brama]

I have a pair of corsair 8500 cl5 (2 Gbytes total) that in my Asus Commando (p965) refused to boot at CAS 4 and now with DQ6 are super stable at 4-4-4-12 with F4 bios performance item set to "extreme".

[172x]

Newbie here, I have some issue with my newly built PC, my system was self reboot when I run CoreTemp 0.95, this problem mostly happen only when CoreTemp was run after system just started.

I wonder whether this is a hardware problem or can be solve with future BIOS/Driver update.
Anybody facing this problem before? Is this a common problem?

I don't want to return my motherboard/RAM.

[zsamz_]

just traded in my new p5wdh n got the p35-dsr
i will post results this week