ASUS P5K Deluxe - Intel P35 Bearlake + E6600 B1 / Q6600 B3

[Speederlander]

Thanks, appreciate it ... Looks like I will be checking temps and see if they are acceptable...If not I will be removing and reseating

Run prime95 blend and monitor mobo temps. I am curious what you get, though I suspect a dual core isn't as stressing as a quad on the mobo.

[ChaosMinionX]

Run prime95 blend and monitor mobo temps. I am curious what you get, though I suspect a dual core isn't as stressing as a quad on the mobo.

No probably not, but I plan on going Penryn when its out, but when I get it...little delay due to the holiday on monday, but when I get the board I will let you know.

[msgclb]

Asus has posted there 0311 BIOS for the P5K Deluxe at this link:

ftp://ftp.asus.com.tw/pub/ASUS/mb/so.../P5K%20Deluxe/

[trajik78]

Asus has posted there 0311 BIOS for the P5K Deluxe at this link:

ftp://ftp.asus.com.tw/pub/ASUS/mb/so.../P5K%20Deluxe/

hm. seems like a big jump from the 0123 (4/17/07) any info on the changes? anyone do it yet?

[eva2000]

How accurate is PC probe mobo temp? It seems to register so high when I am running blend, easily in the 50C range or better, but my NB isn't that hot to touch and I know the airflow is ok. What is it measuring?

For people running blend (especially with quads and boosted NB/FSB volts), what is your PC Probe mobo temp reading after about 15 minutes or so?

pc probe2 and ai suite same reported temps.. MB around 29-34C under load depending on room temp in open desk bench setup with 60x25mm sunon 23.5cfm maglev fan over stock passive nb heatsink with original TIM intact

I removed the coil!

darn was hoping didn't need to remove it like P5B Deluxe = me has no soldering skills LOL

hm. seems like a big jump from the 0123 (4/17/07) any info on the changes? anyone do it yet?

not really i've been on 0307 for a while now so 0311 is just a small jump...

wonder if 0311 is the bios bingo13 was talking about with improved memory performance and fixing the retail quad core reboot issue ?