nice speeds :thumbsup: , got any benchies? this is what i got mine to before i sold it
nice speeds :thumbsup: , got any benchies? this is what i got mine to before i sold it
my ex v-data pc2100 do 240 2/2/2/5 @ 3.3v
3dmark addict
phase-change addict
dirty benching addict
tits lover
try a higher multiplyer, a good fsb is good but if you can get a good fsb and a high multi. it's even better
good job btw
my cs server:
amd xp 2600
abit nf7s v2 with vmods
ati radeon 9800 xt
hyper x pc3500 2x256
ttgi 520 psupply
eheim 315 gph pump
dangerden nbridge&GPU block
x-flow (modded) cpu block
lian li pc75(black)
running stable every day use at 2446@10.5*232
I use 3,28V Vdimm daily... since 6 months ago no problems
[size=0.5]| P4 NorthWood 3.0C @ 4350 Mhz (290 x 15) 1,872V Cooled by Ybris T-Rex @ 13,5V and Powered by TTGI 520W | Abit IC7 | 2*256 mb A-Data Winbond BH-5 Dual CH | Watercooled & Modded HIS 9700 "non Pro" @ 441/351 @ 1,95V/3,40V | Monitor 19" Tatung Vibrant | [size=0.5] | ICQ: [/size][size=0.5]174732553[/size][size=0.5] | [/size][size=0.5]**[/size][size=0.5] Diablo.II@email.it [/size][size=0.5]**[/size]
3DMark Score: [/size][size=0.5]Class Ti4600 ( [/size][size=0.5]16606 pts. [/size][size=0.5])[/size][size=0.5] , [/size][size=0.5]Class Radeon 9700 ([/size][size=0.5]21505 pts. [/size][size=0.5])[/size]
eh?Originally posted by L0$t Pr0PhEt
koensa, try the L12 mod, it doesnt take long and its quite easy.
thats for higher multi right?
Allendale 15sec pi
x800gto 42k2001
Coolermaster ATC 310
1.5Tera
no, L12 mod makes a 266fsb cpu look like a 333fsb or 400fsb cpu to the mainboard.
nf2 a1 a2 and a3 chipset likes 266fsb cpus, the nf2 c1 chipset ikes 333fsb chips more. i could only get 200fsb with my xp1700+ before i did the L12 mod, after it i could get 210/215dc (with default vdd of 1.6v)
right now im running 245dc with 1.75v vdd (not primestable)
250 works as well, but my khx wont run 250 no matter what voltage or timings... i tried 3.6v... nothing
something that helped me a lot in ocing to higher fsb speeds was modding my psu! up the 3.3v to around 3.5v+ and the 5v to around 5.5v. im running 14v/5.7v/3.7v but less is enough as well i think
I'd like a higher multi too, but I don't want to pump too much more voltage into this chip until I get a SF2 for the SK-7. I think I'll just wait until I get a Barton 2500+ before increasing the clock higher.try a higher multiplyer, a good fsb is good but if you can get a good fsb and a high multi. it's even better
Why isn't there a multi of 9?
Samsung SyncMaster 710N
Thermaltake Purepower 420w
Athlon 64 3000+ 939 @ 2.42GHz (242x10)(1.55v)
Gigabyte K8NS Ultra-939
2x512MB Kingston Value PC3200 (2.5-3-3-10-1T)(2.7v)
Visiontek X800 XT
Heatware
Say what?????Originally posted by saaya
no, L12 mod makes a 266fsb cpu look like a 333fsb or 400fsb cpu to the mainboard.
nf2 a1 a2 and a3 chipset likes 266fsb cpus, the nf2 c1 chipset ikes 333fsb chips more. i could only get 200fsb with my xp1700+ before i did the L12 mod, after it i could get 210/215dc (with default vdd of 1.6v)
A1 NB chips like 266fsb CPU's???
Are you sure mate?
I thought all rev 2.0 boards liked 333fsb CPU's...
Am i wrong?
I have a NF7-S rev 2.0 with 0311 A1 NB, are you saying this board doesn't like my Barton??
If that's true, i'll try my XP2100+ tomorrow first thing!!
Asus Crosshair V Formula-Z | FX 8350 | 2x4GB Trident-X 2600 C10 | 2x ATI HD5870 Crossfire | Enermax Revo 1050watt | OCZ Vertex 3 60GB | Samsung F1 1TB
Watercooling: XSPC Raystorm | EK 5870 Delrin fullcover | TFC X-changer 480 w/ 4x Gentle Typhoon | DDC2+ Delrin top | EK 200mm res | Primochill LRT 3/8 tubing
Case: Murdermodded TJ-07
sub 9 sec. SPi1M 940BE 955BE 965BE 1090T
MemTest gave me an error after about 50min @ 3-3-3-6 @ 2.6v.
How long do you guys normally let this run for?
Samsung SyncMaster 710N
Thermaltake Purepower 420w
Athlon 64 3000+ 939 @ 2.42GHz (242x10)(1.55v)
Gigabyte K8NS Ultra-939
2x512MB Kingston Value PC3200 (2.5-3-3-10-1T)(2.7v)
Visiontek X800 XT
Heatware
Posting Permissions
Reply With Quote
Bookmarks