Quote Originally Posted by The Nemesis View Post
I didn't know you were on the 4:5 divider. With that in mind, what voltage do you have set for the nb? This board struggles to run the 4:5 divider. For most people it won't even boot. When successful, it takes a significant amount of voltage on the nb 1.5v+. This board is optimized for 1:1 up to 500FSB with very little tweaking or voltage. I know it's not what you want but try 1:1 same settings. Also I still don't think the gtl needs to be changed @ such a low clock.
I just tried 4:5 to DDR 952..as a quick test

I had been 1:1....went back to 1:1

ran P95 for 8hrs..except speedfan gave some weird error message and core 2 was not under full load..weird ..prime still was running on both cores but explorer.exe was using 10% cycles and P95 was getting 90%..so it failed again at

3420 (380x9)...380 fsb 1:1 DDR 760 5-5-5-15-30. with 2.1v(I know not 2.2v..just trying to keep voltage down)....all other ram stuff at auto

it appears to be stable for only about 5hrs...