DFI 965-S is here! For sale @ ewiz

[nealh]

What I remember of my crucials compared to my g. Skills was their default voltage is 2.2 for their entire Ballistix line. I would not think that under 2.1 would be possibe @ any frequency above PC2-5300. You are simply undervolting your ram, thus it's failing.

ran P95 blend....
well I upped vdmm to 2.2
set ram DDR 952...4:5 divider with 380 fsb
ddr mode3
gtl mode2
fast
fast
dq auto
auto
auto

ran for awhile ..left came back to a black screen and reboot to cmos checksum error...clear cmos with jumoer and starting over again..blah

[Praz]

set ram DDR 952...4:5 divider with 380 fsb

You will probably have to raise voltages for 4:5. The board is not optimized for that divider.

[ZhaoYun]

I have spent the last 4 days trying to get this motherboard Orthos blend stable. Tried different sticks of ram and all it does is prolong the hourly wait towards an inevitable error. I have also tried changing all the voltages / timings and still no dice. You name it I've done it. After all this work once everything is up and running, in the end the squealing may not be worth all the hassle. On load, the squeal is louder than all the fans in my case combined. I can't believe I waited weeks for this to go in stock.