Asus P5K Bearlake P35 chipset motherboard >> TESTING LATEST INTEL CHIPSET

[alpha0ne]

[QUOTE=dinos22;2190319]couldn't handle low clocks i'm confused[/QUOTE]

Thats nothing unusual my friend

[Pretender]

Maybe memory or NB couldn't handle it ?? especially if he was using AUTO or low volt settings ???

I am using TG Xtreem 3 3 3 8 PC5300 , at 4 4 4 12 35(TRFC) and all other setting in auto
and I am giving them 2.3V @ 480 1:1. NB voltage was 1.55 and vfsb was 1.4V.

But there's something going on. With the same settings I can boot to windows and run 1 or 2 hours of orthos blend, reboot and i can't even run 3 sec, and it's a memory problem all the times, perhaps it's the auto sub timmings the reason of this. Does the same thing happens to you people?

@ Eva what sub timmings do you think that are apropriate to run my memories @485 4 4 4 12 ? Thanks

[Achill3uS]

OMG dinos, you're right!
This P5K board is very choosy for memory's.. Today Ive make a last try with the board before the guarantee application, with a memory what you tested too, Corsair Dominator PC8500, and the board give me signal
So Im testing it now, and compared to my Commando, but in one thing Im sure, Quad Core's overclocks very well in this board, my max fsb like in the Commando w/ boxed cooler was 480mhz

[dinos22]

OMG dinos, you're right!
This P5K board is very choosy for memory's.. Today Ive make a last try with the board before the guarantee application, with a memory what you tested too, Corsair Dominator PC8500, and the board give me signal
So Im testing it now, and compared to my Commando, but in one thing Im sure, Quad Core's overclocks very well in this board, my max fsb like in the Commando w/ boxed cooler was 480mhz

I'm shocked

this motherboard only has a 3-pin power connector lol and it clocks to 480MHz FSB


talk about RAM compatibility heheheh at least something works correctly

[Pretender]

I am using TG Xtreem 3 3 3 8 PC5300 , at 4 4 4 12 35(TRFC) and all other setting in auto
and I am giving them 2.3V @ 480 1:1. NB voltage was 1.55 and vfsb was 1.4V.

But there's something going on. With the same settings I can boot to windows and run 1 or 2 hours of orthos blend, reboot and i can't even run 3 sec, and it's a memory problem all the times, perhaps it's the auto sub timmings the reason of this. Does the same thing happens to you people?

I Just found out that my problem was 0304 bios. Switched back to 0202 and its fine now.

[Achill3uS]

I'm shocked

this motherboard only has a 3-pin power connector lol and it clocks to 480MHz FSB


talk about RAM compatibility heheheh at least something works correctly

I will push it more on Vapo LS, and see more max fsb, w/ Commando I cant reach more than 500-505, but I like very much this little "ugly betty"
oh and one more thing: pencil vmod works correctly: before: 1.35v (with enabled cpu volt damper) give real 1.30v idle and 1.26 load after the pencil I set 1.30 and its real 1.30 at load too.

ram compatibility is a joke I use 0406 bios, but why the D9GMH based ADATA 8500 modules dont boot I will never know

[IronAge]

I have got something to share with you all:

VDimm Mod, VMCH Mod. & measure points.

http://www.teamgroup.com.tw/forums/showthread.php?t=182

[Frank M]

Today Ive make a last try with the board before the guarantee application, with a memory what you tested too, Corsair Dominator PC8500, and the board give me signal

Sirály

ram compatibility is a joke I use 0406 bios, but why the D9GMH based ADATA 8500 modules dont boot I will never know

Damn, I was planning to get D9GMHs too... hopefully Gigabyte will not be as
choosy this time...

[Achill3uS]

P35's winrar power
timings: 4-4-3-3-2-20-2-1-1

valid: http://valid.x86-secret.com/show_oc?id=198989


I need memset NOW

[dinos22]

I have got something to share with you all:

VDimm Mod, VMCH Mod. & measure points.

http://www.teamgroup.com.tw/forums/showthread.php?t=182

thanks for the link but are they the same for vanilla P35

P35's winrar power
timings: 4-4-3-3-2-20-2-1-1

valid: http://valid.x86-secret.com/show_oc?id=198989


I need memset NOW

what would you get with P965 in that benchmark

[Bootsy]

What about 500fsb with the 4x1GB crucial? I want to know how high this board will clock with 4 1GB DIMMs.

4x1GB mushkin 7x490 with quad core right out of the box. priming now.

[dinos22]

i think i'm gonna be sick

nice FSB clocking on quad core (P5K vanilla?)

[xt0m]

OMG dinos, you're right!
This P5K board is very choosy for memory's.. Today Ive make a last try with the board before the guarantee application, with a memory what you tested too, Corsair Dominator PC8500, and the board give me signal

Um.. So P5K wont run Dom 8500's or?

[hipro5]

P35's winrar power
timings: 4-4-3-3-2-20-2-1-1

valid: http://valid.x86-secret.com/show_oc?id=198989


I need memset NOW

Errors Found Yes.....

Rerun it coz the score due to errors found would be either higher or lower...

[dinos22]

Um.. So P5K wont run Dom 8500's or?

he is saying it WILL run with PC8500 Dominators

[pinto]

Great mobo this P5K

[Achill3uS]

Errors Found Yes.....

Rerun it coz the score due to errors found would be either higher or lower...

Okay master, thanks for the advice

[erwinz]

dinos.. use your golden E6700 with this board..

[ztop]

the cell shock pc 8000 4-4-4-12 works on this mobo?

[burningrave101]

I'm going to be testing out 4x1GB Buffalo FireStix PC2-6400 D9GMH and 2x1GB Crucial PC2-8000 Ballistix Tracer so I guess I'll see how those fare when my board gets here.

[Knight]

Does anyone know how the raid performance is compared to the p965?

[psychopath]

hi
i need the link to download de last bios of the P5K DELUXE/WIFI
helpme please

[mouawad]

board volts = auto

i also have a 12hr orthos run @ 470x8 stock volts

love this board

[msgclb]

hi
i need the link to download de last bios of the P5K DELUXE/WIFI
helpme please

Check the top of eva2000's thread.
http://www.xtremesystems.org/forums/...94&postcount=1

[psychopath]

0304 is beta or final?