Page 1 of 2 12 LastLast
Results 1 to 25 of 39

Thread: [WR] DDR2 CAS5 Crucial PC8000 + ASUS P5K Deluxe

  1. 05-16-2007, 03:01 PM #1
    jmax_oc
    jmax_oc is offline
    Xtreme Enthusiast
    Join Date
    Jan 2006
    Location
    France
    Posts
    597

    [WR] DDR2 CAS5 Crucial PC8000 + ASUS P5K Deluxe

    Link for more news : http://www.jmax-hardware.com/forum/i...8.html#msg9078

    ASUS P5K Deluxe Bios 0304
    1x1Go Crucial PC8000 EPP
    2.55V
    3x120mm en cascade

    http://valid.x86-secret.com/show_oc.php?id=198379



    Reply With Quote Reply With Quote
  2. 05-16-2007, 03:03 PM #2
    d50man
    d50man is offline
    Xtreme Member
    Join Date
    Jan 2006
    Posts
    133
    comon go 7x and show me what ya got
    Intel i5 3570K@4.6ghz, Swiftech Apogee GTZ, mcp655, Typhoon III and mcr320
    Gigabyte Z77X-UD3H, 8GB 2000 cl9, M4 128GB SSD, 2TB W-D green USB3.0
    MSI 7870 HAWK 1300gpu /1450mem, ASUS VG23AH 23" IPS 3D 72hz
    PCP&C 750W in CM651 case
    89 Ford Mustang coupe burnt orange on chrome ponies
    Bum & Hater #1
    HEATWARE: d50man
    Reply With Quote Reply With Quote
  3. 05-16-2007, 03:10 PM #3
    lasse.j5
    lasse.j5 is offline
    Xtreme Cruncher
    Join Date
    Jan 2007
    Location
    Denmark
    Posts
    177
    Wow.. thats surely is a high frequency!

    And the volts arent that high.

    Can't you push i further with more volts?
    Watercool Project! (Check it out!) (New update: 25/07-2007: Pics of costom made RAM-cooler + lapjob)



    System:
    Intel Core 2 Duo E6420 @ 3600 MHz, 1.52 Vcore
    Asus P5K Deluxe
    Crucial Tenth Anniversary PC-5300 2 x 1024 Mb @ 900 MHz, 4-4-4-9, 2.05 Vdimm (Costom cooled)
    Inno3D 8800 GTS 640 Mb @ 648/1512/1021
    Corsair HX520W
    2 x WD Raptor 74 Gb (RAID0)
    Antec P180B (3 x Scythe S-FLEX SFF21E @ ~ 10 V)
    Samsung SyncMaster 226BW 22"
    Sunbeam Rheobus

    Watercooling:
    Swiftec Apogee GTX (Bowed)
    Swiftec MCW60 (Swiftec MC14 and MC21 ramsinks)
    Thermochill PA120.3 (3 x Shakoon Silent Eagle 2000 @ ~ 6.5 V)
    Laing DCC-2 18W (Aplhacool top)
    EK Multioption 150
    Masterkleer 7/16" ID
    EK High-Flow fittings
    Reply With Quote Reply With Quote
  4. 05-16-2007, 03:11 PM #4
    jmax_oc
    jmax_oc is offline
    Xtreme Enthusiast
    Join Date
    Jan 2006
    Location
    France
    Posts
    597
    Yep I will try it but I'm again mainboard limited
    I think that I can do same with 2.3V only
    Reply With Quote Reply With Quote
  5. 05-16-2007, 03:15 PM #5
    PanteraGSTK
    PanteraGSTK is offline
    Xtreme Cruncher
    Join Date
    Dec 2006
    Location
    Texas
    Posts
    784
    Was it easier to achieve with p35 or p965?
    100% OC

    Max OC on my crappy S3 1.8v vcore DICE cooling

    Come crunch with us. Click me to find out more.
    Reply With Quote Reply With Quote
  6. 05-16-2007, 03:24 PM #6
    stephen23
    stephen23 is offline
    Xtreme Member
    Join Date
    Feb 2007
    Location
    Hong Kong
    Posts
    142
    Quote Originally Posted by PanteraGSTK View Post
    Was it easier to achieve with p35 or p965?
    it id sure on P35, on 965, my ram can only go to 550 no matter what CL value.
    now my ram can go to 570 on CL4 and even 651 on CL5

    CPU-Z got error on old BIOS:


    Reply With Quote Reply With Quote
  7. 05-16-2007, 03:33 PM #7
    jmax_oc
    jmax_oc is offline
    Xtreme Enthusiast
    Join Date
    Jan 2006
    Location
    France
    Posts
    597
    Quote Originally Posted by PanteraGSTK View Post
    Was it easier to achieve with p35 or p965?
    Sure that it's a lot easier in CAS5.

    With My P5B Delxue : max screen : 716MHz.
    With this P5K Deluxe : max screen : 742MHz.
    Reply With Quote Reply With Quote
  8. 05-16-2007, 03:45 PM #8
    ZoLKoRn
    ZoLKoRn is offline
    Champion
    Join Date
    May 2006
    Location
    Bangkok, Thailand
    Posts
    1,375
    WoW ! very good man , P35 look at interested come to OC memory
    Sorry For My English
    OverclockZone Team
    THAILAND
    Reply With Quote Reply With Quote
  9. 05-16-2007, 04:31 PM #9
    Walkerak
    Walkerak is offline
    Registered User
    Join Date
    Oct 2006
    Location
    P.R.China
    Posts
    19
    awesome ~My guy

    Just Tell Me What Love is.....
    Reply With Quote Reply With Quote
  10. 05-16-2007, 04:43 PM #10
    Bootup05
    Bootup05 is offline
    Xtreme Cruncher
    Join Date
    Oct 2006
    Location
    Essex, UK
    Posts
    930
    Holy Horses Nice clocks! Whats the max benchable 1M run you can do?

    EDIT: Nice volts aswell!, Only 2.55
    Reply With Quote Reply With Quote
  11. 05-16-2007, 04:45 PM #11
    PanteraGSTK
    PanteraGSTK is offline
    Xtreme Cruncher
    Join Date
    Dec 2006
    Location
    Texas
    Posts
    784
    Quote Originally Posted by jmax_oc View Post
    Sure that it's a lot easier in CAS5.

    With My P5B Delxue : max screen : 716MHz.
    With this P5K Deluxe : max screen : 742MHz.
    Interesting. How far have you gotten with cas4? My memory controller won't let me go past 650mhz for some reason. It may have something to do with ratios and such. Have you ever tried to get to 700mhz on 6xx nvidia chipsets?
    100% OC

    Max OC on my crappy S3 1.8v vcore DICE cooling

    Come crunch with us. Click me to find out more.
    Reply With Quote Reply With Quote
  12. 05-16-2007, 04:55 PM #12
    jmax_oc
    jmax_oc is offline
    Xtreme Enthusiast
    Join Date
    Jan 2006
    Location
    France
    Posts
    597
    Max bench 1M around 725-728MHz
    Never tester NF6xx

    I will test CAS4 soon ^^
    Reply With Quote Reply With Quote
  13. 05-16-2007, 04:58 PM #13
    dinos22
    dinos22 is offline
    Xtreme Legend
    Join Date
    Mar 2005
    Location
    Australia
    Posts
    17,242
    hmmm it never occured to bench with one stick
    Team.AU
    Got tube?
    GIGABYTE Australia
    Need a GIGABYTE bios or support?

    Reply With Quote Reply With Quote
  14. 05-16-2007, 05:05 PM #14
    erwinz
    erwinz is offline
    Xtreme Addict
    Join Date
    May 2006
    Location
    Philippines ^_^
    Posts
    1,618
    very nice memories..
    Asus P5W64 WS Professional , DFI Infinity 965P-S (testing)
    X6800 , E6750 es
    Micron Fatbodies , Micron D9gkx oem, Crucial 8000, Crucial Tracer 8500 (incomming)
    Ati FireGL V5100, Elsa FireGL V3100
    water cooling setup (EK 775 cpu block, swiftech NB Block, Swiftech pump, BI dual pass dual 120mm)
    Silverstone OP650
    raptors, baracuda
    Reply With Quote Reply With Quote
  15. 05-16-2007, 05:07 PM #15
    dinos22
    dinos22 is offline
    Xtreme Legend
    Join Date
    Mar 2005
    Location
    Australia
    Posts
    17,242
    jmax

    btw i tested all the ratios on P5K mobo and it seems that 3:5 ratio gives highest RAM clocks on my board

    http://www.xtremesystems.org/forums/...&postcount=122

    maybe try that ratio and see if you can squeeze another 5MHz or whatever heh
    Team.AU
    Got tube?
    GIGABYTE Australia
    Need a GIGABYTE bios or support?

    Reply With Quote Reply With Quote
  16. 05-16-2007, 05:53 PM #16
    jmax_oc
    jmax_oc is offline
    Xtreme Enthusiast
    Join Date
    Jan 2006
    Location
    France
    Posts
    597
    Thanks dinos, I just received this mainboard so I do not try all the ratios
    I saw that 5:6 isn't very good.
    4:5 reach 697Mhz bench 2x1Go
    2:3 rox (you see my screens)
    Reply With Quote Reply With Quote
  17. 05-16-2007, 06:19 PM #17
    dinos22
    dinos22 is offline
    Xtreme Legend
    Join Date
    Mar 2005
    Location
    Australia
    Posts
    17,242
    Quote Originally Posted by jmax_oc View Post
    Thanks dinos, I just received this mainboard so I do not try all the ratios
    I saw that 5:6 isn't very good.
    4:5 reach 697Mhz bench 2x1Go
    2:3 rox (you see my screens)
    5:6 is fine

    5:16 is not so good
    Team.AU
    Got tube?
    GIGABYTE Australia
    Need a GIGABYTE bios or support?

    Reply With Quote Reply With Quote
  18. 05-16-2007, 06:28 PM #18
    PanteraGSTK
    PanteraGSTK is offline
    Xtreme Cruncher
    Join Date
    Dec 2006
    Location
    Texas
    Posts
    784
    Quote Originally Posted by jmax_oc View Post
    Max bench 1M around 725-728MHz
    Never tester NF6xx

    I will test CAS4 soon ^^
    Looking forward to cas4
    100% OC

    Max OC on my crappy S3 1.8v vcore DICE cooling

    Come crunch with us. Click me to find out more.
    Reply With Quote Reply With Quote
  19. 05-16-2007, 10:41 PM #19
    Hutch
    Hutch is offline
    Xtreme Member
    Join Date
    Jul 2006
    Location
    Haverhill, MA
    Posts
    491
    Send a message via AIM to Hutch
    Quote Originally Posted by dinos22 View Post
    hmmm it never occured to bench with one stick
    One stick (usually doesn't matter which stick it is either) will usually run higher than two sticks. Not only that, but you can hit higher FSBs with one stick versus two. Why you may ask... Less stress on the MCH with one stick
    E6400 L624A768 @ 3600mhz 1.48V
    Biostar TP35D2-A7
    2x1GB Micron D9JKH, 2x1GB OCZ Gold DDR2-1100
    1x250GB WD SATAII 2x120GB Maxtor IDE 1x200GB
    EVGA 8800GTS 512MB stock 799/1998/2075
    MCW350, Apogee, 120.1 Swiftech Rad
    Antec Smartpower 500W
    BenQ DVDrw
    Logitech z-5300e
    Reply With Quote Reply With Quote
  20. 05-16-2007, 10:44 PM #20
    eva2000
    eva2000 is offline
    Memory Addict
    Join Date
    Aug 2002
    Location
    Brisbane, Australia
    Posts
    11,651
    nice indeed
    ---
    Reply With Quote Reply With Quote
  21. 05-17-2007, 04:04 AM #21
    animaN
    animaN is offline
    Registered User
    Join Date
    Jan 2007
    Location
    Belgrade-Serbia
    Posts
    24
    Did You try that crucial at p5b deluxe or some else nice 965 MB?
    btw Great work!
    Just because you look stupid, you're not stupid unless you do stupid things
    Reply With Quote Reply With Quote
  22. 05-17-2007, 09:18 AM #22
    over@locker886
    over@locker886 is offline
    Champion
    Join Date
    Nov 2004
    Location
    Hungary
    Posts
    1,189
    Send a message via MSN to over@locker886
    Congrats
    "We are competing, competing to win. And the main motivation is to compete for victory" - Ayrton Senna
    Reply With Quote Reply With Quote
  23. 05-17-2007, 09:36 AM #23
    DEVIL K-ce
    DEVIL K-ce is offline
    Xtreme Cruncher
    Join Date
    Mar 2005
    Location
    EU
    Posts
    891
    Good work

    Congrats next WR


    Martin


    Life sometimes gets in the way of what we want to do.
    Reply With Quote Reply With Quote
  24. 05-17-2007, 09:41 AM #24
    Eldonko
    Eldonko is offline
    Xtreme Addict
    Join Date
    Apr 2005
    Location
    Calgary, AB
    Posts
    2,219
    Congrats man, mem WR ftw!
    MB Reviewer for HWC
    Team OCX Bench Team
    Reply With Quote Reply With Quote
  25. 05-17-2007, 10:18 AM #25
    Quentin
    Quentin is offline
    Xtreme Member
    Join Date
    Jun 2006
    Location
    Belgium - Brussel
    Posts
    237
    Héhé Jmax nice job

    I'm arrived today @ 742Mhz Too



    http://valid.x86-secret.com/show_oc?id=198560

    I want a P5K Deluxe too

    It will be a race for the DDR2-1500
    E6600 @ 4710 MHz - 1M @ 4610 MHz : 10.984s - 32M @ 4500 MHz : 11m46.109s [Single Stage]
    E6700 @ 5031 MHz [Single Stage]
    My DDR2 700Mhz Club : Crucial Ballistix PC2-5300 512Mb : 702MHz | OCZ PC2-8500 1Gb : 720MHz | Buffalo PC2-6400 512Mb : 726 MHz | Crucial Ballistix PC2-8500 1Gb : 742 MHz
    I love DDR2
    Reply With Quote Reply With Quote
Page 1 of 2 12 LastLast
« Previous Thread | Next Thread »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules