see my editOriginally Posted by nemrod
see my edit
What should I see? They speak of computex so in June... And desktop version for this summer??? Very strange...Officialized as of Monday, these new babies should be in intensive demonstration at the time of next Computex, but will not be available in their version general public before the summer even the re-entry, for the models Quad Core.
I have find your source:
http://www.pcinpact.com/actu/news/36...Huit-cores.htm
And it looks like they report what anandtech and other have seen but adding this date and computex? Curious?
Their source:
another french site: http://www.hardware.fr/news/lire/10-05-2007/
but no information about nda or computex on this one...
But It doesn't matter, if you're right we will see tomorrow, if not, we will wait few months again as we do since long time...
Last edited by nemrod; 05-13-2007 at 01:46 PM.
14... of what month?
lol
there are several posts telling that NDA lift on K10 is 14th of May 2007 and people still asking the date
It will be soft launch meaning that actual products will be delivered to resellers only in second half of this year. Can't tell you more cos i don't know the exact data myself.
Tommorow AMD will publish a Press Release.
AMD Barcelona K10 B0 pictured
http://www.fudzilla.com/index.php?op...=959&Itemid=35Exclusive: A new revision kicking well
Some of you might remember our Agena screenshot roughly a month ago and we have some news for you. Today we got a snap of a Barcelona sample, up and running. You can see the Agena here.
Barcelona on the other hand works at 2.4 GHz in Socket F 1207 motherboard. It needs 1.144V and CPU-Z recognizes it as AMD Processor model unknown.
The tested sample was model 8, stepping 1 famous revision B0. We already mentioned this chip here.
The CPU specification is even more interesting. This is an Engineering sample 00 (ES) processor. The sample works at 2.4 GHZ with a buss speed of 266 MHz and a multiplier of 9.
The HT works at 1333 MHz. The CPU Z 1.4 recognizes all four cores, 4x64 L1 data and 4x64 KB code cache and the whole 4x512 KB L2 memory but it can not read the L3 memory at least not from this core.
The best part of it is that there is a more to come, just give us some time. So this is how a new Opteron looks like.
So who wants to come over tonight for the countdown party?
i3-8100 | GTX 970
Ryzen 5 1600 | RX 580
Assume nothing; Question everything
1333Mhz makes no sense at all for HT. HTT1.0 has a max of 800Mhz, HT2.0 is 1.4GHz max, and HT3 has a max of 2.6GHz. No where is a 266/1333 bus mentioned. I call BS.
Fold for XS!
You know you want to
fudzilla or inq?? which one should i trust more
E6600 @ 3.6
IN9 32x MAX
EVGA 8800Ultra
750W
No! today is not endings NDA for K10! But only Phenom name of CPU!
266x5=1333
I can do that on my DFI board right now. What's so strange about that?
Intel E8400.C0 "Wolfe"| 400x9 3600 Mhz @ 1.272 Vcore
TT Sonic Tower | Dual 120mm Antec Fans | Silent Air @ 1200 RPM
ASUS P5Q-E | BIOS 0610
G.Skill F2-8000CL5-2GBPQ | 400 MHz (5-5-5-15) @ 2.0 V (? Auto)
XFX 7800GT
Wester Digital Raptor 74GB | Maxtor Maxline III 300GB | Seagate 7200.7 120GB
Antec P-180 | Antec True Power 2.0 550W
Dell 2407 | Dell 2405
CPU-Z cannot recognize muliplier and HT right
K10 cpu we see has clockspeed = 2400, bus = 200, multi = 12x and HT=3600 MT/sec
AMD Names Athlon's Successor: Phenom
http://www.anandtech.com/cpuchipsets...oc.aspx?i=2987
AMD Announces Phenom Processor Branding
http://www.dailytech.com/article.aspx?newsid=7263
Last edited by onethreehill; 05-13-2007 at 10:58 PM.
You're probably right...
http://www.amd.com/us-en/Corporate/V...117412,00.html
Fudzilla and CPU-Z screenshots dont mix after all those fakes.
Crunching for Comrades and the Common good of the People.
Yes, because i KNOW it!
Because why would AMD chose to not even use the HT2.0 bus to its full potential, not to mention HT3 has vastly higher speeds then that. And that there no possible way to get an even 1800 or 2600MHz when the base bus speed is 266MHz.
Fold for XS!
You know you want to
The HT should have been 1.8Ghz or so. (3.6GT/s). So smells so much of a fake.
Crunching for Comrades and the Common good of the People.
Barcelona is HT2.0 not HT3.0 ...
HT 3.0 is chipset related feature NOT primary CPU ... and Barcelona "Agena" is HT 3.0 ready!
Last edited by OBR; 05-14-2007 at 05:34 AM.
Is there any AM2+ boards coming out soon(ish), or will they be released with K10 in Q4? I would of loved to pick up a X2 3600+ at ~50€ and an AM2+ board, later dropping a Kuma in it.
Last edited by fyseni; 05-14-2007 at 05:32 AM. Reason: Typo
Boards will hit retail around June/July(at least that was the plan)
Is the actual K10 NDA in place until server parts launch in July/Aug, or is it going to expire in the near future?
Actually it's a bus connecting CPU with chipset.
Official date is 2H. But I wouldn't expect good variety until autumn. Two advantages of AM2+ are HT 3.0 support and multy lane power for CPU and memory controller which should be better in terms of overclocking.
AMD Phenom II X6 1055T@3.5GHz@Scythe Mugen 2 <-> ASRock 970 Extreme4 <-> 8GB DDR3-1333 <-> Sapphire HD7870@1100/1300 <-> Samsung F3 <-> Win8.1 x64 <-> Acer Slim Line S243HL <-> BQT E9-CM 480W
lol just more screenshots and we r bout 6months away from launch
E6600 @ 3.6
IN9 32x MAX
EVGA 8800Ultra
750W
Posting Permissions
Bookmarks