wow this chipset sounds promising.
Do you think you can show some 3.6ghz superpi
wow this chipset sounds promising.
Do you think you can show some 3.6ghz superpi
CPU: Q6600 @ 3.6ghz G0 Week 37B
Mobo: Asus P5k Deluxe
Cooler: TRUE 120 (150cfm Delta)
2xHR-05
2xHR-09
Mem: G.Skill 4x1Gb 6400HZ
Vid: HIS 4850
HDD: 80Gb 16mb Cache Raptor
500Gb 7200.11 Seagate
PSU: Enermax Noisetaker 600w
Case: Thermaltake Armor (4x120mm 104CFM Panaflo)
3dmark06: 16k
for me 480fsb is rock solid, check the orthos screenshot!Originally Posted by Speederlander
yeap, setfsb works like a charm!, i only have a little problem with cpu-z as it reports mem speed and latencies not correct, im using 1.40 just like everyone else but ...yeah i worked with abo-san to get the P5K working with setfsb .>> everything works properlyand is lighter on the system than clockgen anyways
but we need memset now for SPI tweaking
spi 3600 is slow for my taste because i cant use for the time being my best pair of mems! and im limited to 610mhz with 5-5-5-12
also without the memset there are still subtimings that you can change in BIOS although you can boot with the tightest timings BIOS allows without issues!
i DO have to mention again that this is the most SOLID 775 board ive tested so far and ive done to it so many bad things in terms of overclocking!
Last edited by esdee; 05-15-2007 at 01:50 AM.
if this is your first night in xtremesystems,
you have to overclock.
OMG..pls show mercy and don't give it to Hiproi DO have to mention again that this is the most SOLID 775 board ive tested so far and ive done to it so many bad things in terms of overclocking!
Posting Permissions
Reply With Quote
Bookmarks