Page 3 of 4 FirstFirst 1234 LastLast
Results 51 to 75 of 96

Thread: Kinc found a picture on his USB flash drive

  1. #51
    Xtreme Enthusiast
    Join Date
    May 2006
    Location
    UK
    Posts
    706
    Quote Originally Posted by Kinc View Post
    If you have an old cpu cooler or other heatsink with thin copper or aluminium fins you can rip that appart, thats what I did
    thanks i am cutting up an old amd xp heatsink as we speak, thanks again a money saving tip as well can't be bad

    oh and no one else has mentioned it but the 3dmark 05 canyon flight score of yours 165fps beats the existing no.1 score for a single 8800gtx by 5 fps and your using 1400mhz less cpu speed
    Last edited by GLENBOY; 05-12-2007 at 07:07 AM.





  2. #52
    Xtreme Legend
    Join Date
    Dec 2004
    Location
    Sweden
    Posts
    1,184
    Quote Originally Posted by Jonny Manc View Post
    Can I get back to the earlier point about synthetic benchies vs real world gaming?

    What do we think the real world gaming / 3d performance is gonna be like on these *mystery* cards...sky high or dive bomb?

    This is the part of the forum where synthetic benchmarks matter
    Last edited by Kinc; 05-12-2007 at 07:12 AM.

  3. #53
    Xtreme Member
    Join Date
    Mar 2005
    Location
    Netherlands
    Posts
    322
    Quote Originally Posted by NH|Delph1 View Post
    Kinc goes subzero:



    And this is far from the peak

    From: source

    //Andreas
    wow

    That's 5fps more than Hipro's 160FPS's singlecard WR run!(with CPU @ 5,4GHz!)

  4. #54
    xtreme energy
    Join Date
    Oct 2004
    Location
    Europe, Latvia
    Posts
    4,145
    Have you already found hard voltmods? Hopefully, Wizzard will make Ati tool working with this
    ...

  5. #55
    I am Xtreme
    Join Date
    Jan 2005
    Posts
    4,714
    Quote Originally Posted by DesertShooter View Post
    wow

    That's 5fps more than Hipro's 160FPS's singlecard WR run!(with CPU @ 5,4GHz!)
    He's already at 176.7 and hopefully even higher.

    Oh, yeah, he broke 30K 3dm05 single card
    Where courage, motivation and ignorance meet, a persistent idiot awakens.

  6. #56
    Xtreme Enthusiast
    Join Date
    Aug 2006
    Location
    North Carolina, USA
    Posts
    839
    Can someone explain the coldplate solution to me real quick? I plan to mod my XT w/ a waterblock but am a little concerned about the raised shim around the GPU. I would rather not have the GPU naked; I've heard that on past ATI cards the shim was only removed by a sharp knife or razor blade.. not screws like on G80.

    Is the piece of copper linked from Petras used inbetween the GPU and the waterblock, or how does it work? Can someone explain it in detail giving thermal material application as well?

    Thanks!

  7. #57
    Registered User
    Join Date
    Feb 2005
    Posts
    92
    Quote Originally Posted by Jonny Manc View Post

    What do we think the real world gaming / 3d performance is gonna be like on these *mystery* cards...sky high or dive bomb?
    Wrong forum.

    These guys don't play games.

  8. #58
    Xtreme Enthusiast
    Join Date
    May 2006
    Location
    over the rainbow
    Posts
    964
    singlecard WR!

    AMD Phenom II X6 1055T@3.5GHz@Scythe Mugen 2 <-> ASRock 970 Extreme4 <-> 8GB DDR3-1333 <-> Sapphire HD7870@1100/1300 <-> Samsung F3 <-> Win8.1 x64 <-> Acer Slim Line S243HL <-> BQT E9-CM 480W

  9. #59
    Xtreme Addict
    Join Date
    Nov 2005
    Location
    Where the Cheese Heads Reside
    Posts
    2,173
    DAmn that was quick lol. Now give it a few more drivers and days of OCing and surely it will do more. 30k gratz
    -=The Gamer=-
    MSI Z68A-GD65 (G3) | i5 2500k @ 4.5Ghz | 1.3875V | 28C Idle / 65C Load (LinX)
    8Gig G.Skill Ripjaw PC3-12800 9-9-9-24 @ 1600Mhz w/ 1.5V | TR Ultra eXtreme 120 w/ 2 Fans
    Sapphire 7950 VaporX 1150/1500 w/ 1.2V/1.5V | 32C Idle / 64C Load | 2x 128Gig Crucial M4 SSD's
    BitFenix Shinobi Window Case | SilverStone DA750 | Dell 2405FPW 24" Screen
    -=The Server=-
    Synology DS1511+ | Dual Core 1.8Ghz CPU | 30C Idle / 38C Load
    3 Gig PC2-6400 | 3x Samsung F4 2TB Raid5 | 2x Samsung F4 2TB
    Heat

  10. #60
    Xtreme Addict
    Join Date
    Jun 2004
    Posts
    1,280
    O o o, just edged K|NGP|N's 29686 8800 ultra single card WR in 05.....

    Both cards very close, kingpin needed 5300mhz for 29.6K where
    as Kinc with 100mhz less about 300+ points over...
    im sure both benchers tweaked well so that would weight out
    any thoughts there......not bad.......8800 vs 2900.....
    2900XT still better buy @ 429.00 usd get performance
    equal to or slight better of an 8800 gtx/ultra....

  11. #61
    Xtreme Addict
    Join Date
    Nov 2005
    Location
    Where the Cheese Heads Reside
    Posts
    2,173
    Quote Originally Posted by Dynasty View Post
    O o o, just edged K|NGP|N's 29686 8800 ultra single card WR in 05.....

    Both cards very close, kingpin needed 5300mhz for 29.6K where
    as Kinc with 100mhz less about 300+ points over...
    im sure both benchers tweaked well so that would weight out
    any thoughts there......not bad.......8800 vs 2900.....
    2900XT still better buy @ 429.00 usd get performance
    equal to or slight better of an 8800 gtx/ultra....
    429? Psh $403, 2 Day Delivery Those 2 scores though are amazing though so close. Question is what drivers did Kinc use? Must of been the latest ones right?
    -=The Gamer=-
    MSI Z68A-GD65 (G3) | i5 2500k @ 4.5Ghz | 1.3875V | 28C Idle / 65C Load (LinX)
    8Gig G.Skill Ripjaw PC3-12800 9-9-9-24 @ 1600Mhz w/ 1.5V | TR Ultra eXtreme 120 w/ 2 Fans
    Sapphire 7950 VaporX 1150/1500 w/ 1.2V/1.5V | 32C Idle / 64C Load | 2x 128Gig Crucial M4 SSD's
    BitFenix Shinobi Window Case | SilverStone DA750 | Dell 2405FPW 24" Screen
    -=The Server=-
    Synology DS1511+ | Dual Core 1.8Ghz CPU | 30C Idle / 38C Load
    3 Gig PC2-6400 | 3x Samsung F4 2TB Raid5 | 2x Samsung F4 2TB
    Heat

  12. #62
    Xtreme Addict
    Join Date
    May 2004
    Posts
    1,755
    Hehe, seems like the show just started

  13. #63
    Muslim Overclocker
    Join Date
    May 2005
    Location
    Canada
    Posts
    2,786
    For benching this will be monster. If ati hadn't screwed up texture units, things might be different...

    My watercooling experience

    Water
    Scythe Gentle Typhoons 120mm 1850RPM
    Thermochill PA120.3 Radiator
    Enzotech Sapphire Rev.A CPU Block
    Laing DDC 3.2
    XSPC Dual Pump Reservoir
    Primochill Pro LRT Red 1/2"
    Bitspower fittings + water temp sensor

    Rig
    E8400 | 4GB HyperX PC8500 | Corsair HX620W | ATI HD4870 512MB


    I see what I see, and you see what you see. I can't make you see what I see, but I can tell you what I see is not what you see. Truth is, we see what we want to see, and what we want to see is what those around us see. And what we don't see is... well, conspiracies.



  14. #64
    Xtreme Addict
    Join Date
    Jun 2004
    Posts
    1,280
    Quote Originally Posted by deathman20 View Post
    429? Psh $403, 2 Day Delivery Those 2 scores though are amazing though so close. Question is what drivers did Kinc use? Must of been the latest ones right?

    Im almost positive he is on 8.38 drivers as they give nice boost in
    3d mark over 8.374's...............

  15. #65
    I am Xtreme
    Join Date
    Apr 2005
    Location
    Upstate, NY
    Posts
    5,425
    Holy Crap the XT is fast, I cant imagine the XTX!

    GOGOGO ATi! !
    Core i3-550 Clarkdale @ 4.2GHz, 1.36v (Corsair A50 HS/F) LinX Stable
    MSI H55-GD65 Motherboard
    G.Skill 4GBRL DDR3-1600 @ 1755, CL9, 1.55v
    Sapphire Radeon 5750 1GB
    Samsung F4 320GB - WD Green 1TB
    Xigmatek Utgard Case - Corsair VX550

  16. #66
    Xtreme Enthusiast
    Join Date
    Sep 2005
    Location
    Switzerland
    Posts
    526
    Ouch 1147 mhz on core.....
    We have not again the card.. and he give us a WR.....

    tssss tssss tsss!!!!! (you desesperate me....)
    Last edited by Lane-k; 05-12-2007 at 10:34 AM.

  17. #67
    Xtreme Enthusiast
    Join Date
    May 2006
    Location
    over the rainbow
    Posts
    964
    Quote Originally Posted by Dynasty View Post
    Im almost positive he is on 8.38 drivers as they give nice boost in
    3d mark over 8.374's...............
    No, he used the 8.374 driver. With the 8.38 he would get about 1-2k points more.
    AMD Phenom II X6 1055T@3.5GHz@Scythe Mugen 2 <-> ASRock 970 Extreme4 <-> 8GB DDR3-1333 <-> Sapphire HD7870@1100/1300 <-> Samsung F3 <-> Win8.1 x64 <-> Acer Slim Line S243HL <-> BQT E9-CM 480W

  18. #68
    Xtreme Mentor
    Join Date
    May 2007
    Posts
    2,792
    In all honesty, I am looking at 32-33k here when pushed with release drivers

    I don't expect less.

    Nay, not pushed enough yet, eh Marcus

  19. #69
    Xtreme Mentor
    Join Date
    Nov 2005
    Location
    Devon
    Posts
    3,437
    OMG!!

    Congrats to Kinc

    ATi is getting core clocks very close to CPUs ones
    They should catch up around 2009 with clocks coz of Fusion CPU..

    PS. I'm just reached a bit over 10k in 3DM05 ... Kinc score gives something to think about...
    RiG1: Ryzen 7 1700 @4.0GHz 1.39V, Asus X370 Prime, G.Skill RipJaws 2x8GB 3200MHz CL14 Samsung B-die, TuL Vega 56 Stock, Samsung SS805 100GB SLC SDD (OS Drive) + 512GB Evo 850 SSD (2nd OS Drive) + 3TB Seagate + 1TB Seagate, BeQuiet PowerZone 1000W

    RiG2: HTPC AMD A10-7850K APU, 2x8GB Kingstone HyperX 2400C12, AsRock FM2A88M Extreme4+, 128GB SSD + 640GB Samsung 7200, LG Blu-ray Recorder, Thermaltake BACH, Hiper 4M880 880W PSU

    SmartPhone Samsung Galaxy S7 EDGE
    XBONE paired with 55'' Samsung LED 3D TV

  20. #70
    Registered User
    Join Date
    Oct 2005
    Location
    Estonia
    Posts
    82
    Damn insane.
    Ati is finally back, waited 3 months for this.
    AMD Ryzen 7 1700X
    ASRock X370 Professional Gaming
    2X8GB Corsair Vengeance LPX 3000MHz
    Gigabyte GeForce GTX1060 6GB G1 Gaming
    2 X Kingston HyperX Savage 120GB Raid 0
    Western Digital Blue 1TB
    NZXT H440
    Seasonic X850
    Watercooled

  21. #71
    Xtreme Legend
    Join Date
    Dec 2004
    Location
    Sweden
    Posts
    1,184
    Quote Originally Posted by deathman20 View Post
    429? Psh $403, 2 Day Delivery Those 2 scores though are amazing though so close. Question is what drivers did Kinc use? Must of been the latest ones right?
    8.37

    I would really like a newer one with more perf though

  22. #72
    Xtreme Member
    Join Date
    May 2005
    Location
    CHILE
    Posts
    372
    just the begining?
    Under Zero


  23. #73
    Slovenian OC Master
    Join Date
    Nov 2004
    Location
    Slovenia
    Posts
    1,089
    kinc, do you by any chance know when will Ati Tool supporting R600 be released ?
    OC-Lab.si!!

  24. #74
    X.I.P
    Join Date
    Mar 2005
    Posts
    1,964
    Kinc nice score.
    have you try CF yet??
    i thinky 1GB version bios are too old (3/1 vs 4/19)... that is why perf lower than 512MB

    any chance to let me know the ati tool you use

  25. #75
    Great job kinc as always ATI always rocks in 05'. Can't wait to see Sami in action again too. Long time coming for that. I thought the 2900 would really give it to the ultra in 05', more left? Closer than I thought.
    What about the rest of the benches....06,03,01,am3? After NDA?
    How close are the 2 gpus in those?
    Ultra isn't tapped out yet guys, but it looks to be a good fight shaping up in 05 for sure.

Page 3 of 4 FirstFirst 1234 LastLast

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •