ASUS P5W DH - Problems + Fixes Thread

[pH(x)]

I've reached 3.33GHz Dual Orthos 20hr stable. But I can't post my benchmarks in the Overclock DB because I sanded off (20 micron) my stepping information to

I would love to though.

Lapped E6600 @ 3.33GHz (1.45v actual)
Micron D9 PC28500 (@ PC27100 5-5-5-15 2.2v)
Asus P5W-DH Deluxe
VMCH 1.55v
Arctic Cooling Freezer 7 Pro

CPU: 40C idle 49C load
NB: 40C idle 43C load

[sesdave]

I've reached 3.33GHz Dual Orthos 20hr stable. But I can't post my benchmarks in the Overclock DB because I sanded off (20 micron) my stepping information to

I would love to though.

Lapped E6600 @ 3.33GHz (1.45v actual)
Micron D9 PC28500 (@ PC27100 5-5-5-15 2.2v)
Asus P5W-DH Deluxe
VMCH 1.55v
Arctic Cooling Freezer 7 Pro

CPU: 40C idle 49C load
NB: 40C idle 43C load

These coretemp/TAM temps ? You should be able to get a little higher with a later batch e6600. I have lapped mine too -didnt make much difference to temps idle 48 - load 58 so it must have been fairly flat already - but the CPU can take these temps. . You are running with a 4:5 divider - check my previous post re 1:1 vs 4:5 ifor FSB 400 or below. I run orthos stable @3.6 with memory 1:1 with 4,4,4,12,4 with 400 FSB with Bios vcore 1.5v(mount varies CPU to CPU) other settings FSB=1.3,MCH=1.65,ICH=1.2. I would think your RAM should run DDR 800 4,4,4,12 or tighter no problem Disable everything in the BIOS you dont recognise or arent using , Give it a go!