Has anyone tried using a quad core in current 965 chipset boards?
Has anyone tried using a quad core in current 965 chipset boards?
Core 2 Duo E8400 @ 4ghz
2GB PC2-6400 @ 445/890 4, 4, 4, 12
ATI HD4850 @ stock
Gigabyte P35-DS3L
El Cheapo 500w PSU with dual 12v rails
16X DVD+/- R/W
What would be the advantage going to an xeon compared to a Q6600 ?Originally Posted by virtualrain
The general consensus is that the 3000 (Conroe) and X3000 (Kentsfeild) series Xeons are of higher bin quality than their Core2 counterparts, though no one has ever gotten a confirmation of this from Intel. Aside from that, there is no difference.
Look at the tyranny of party--at what is called party allegiance, party loyalty--a snare invented by designing men for selfish purposes--and which turns voters into chattles, slaves, rabbits, and all the while their masters, and they themselves are shouting rubbish about liberty, independence, freedom of opinion, freedom of speech, honestly unconscious of the fantastic contradiction; and forgetting or ignoring that their fathers and the churches shouted the same blasphemies a generation earlier when they were closing their doors against the hunted slave, beating his handful of humane defenders with Bible texts and billies, and pocketing the insults and licking the shoes of his Southern master.
--Mark Twain, The Character of Man
I am running a Q6600 in a Shuttle SFF SD39P2 at 9x333 = 3ghz at stock voltage and runs like a champ. Temp went up 2 degrees when going from 2.4ghz to 3.0ghz so I suspect I have a killer chip.
Current Rig:
Shuttle XPC SX58J3
Intel i7-930 @ 3.33ghz
ATI Radeon 5970
OCZ Vertex 3 240GB
12GB DDR3
mines running just nice at 9x401 fsb with 1.45 vcore ..I removed my vdroop mod before i insatalled the cpu. and it seems ok at 3.6ghz i wont push it any harder untill i recieve my chill control back as im just relying on the sensor on the mother board for evap temps..Asus probe and speed fan my temps are stuck on -2c it dosnt change..i dont know why but i would like it fixed..E6600 never had this problem..
anyone know easiest way to get a image to 200 kb without cutting the crap out of it ?
Asus COMMANDO -Intel Q6600 @ 3.6Ghz 401x9 have sum test @ 445x9 4GHZ :-)
2x74 Gig Raptors Raid 0..GSKILL 6400 2x1Mb matchd Pair.-OCZ 550w Powerstream adjustable rails- XE2 Vapochill -pioneer Dvd.-2x160 Gig Hitachi ide drives..-Asus 7600 gs video card
http://www.hwbot.org/user.do;jsessio...C3?userId=8636
so with vapochill u can only get 3.6GHz??
and how come u only have 50% .. load ... try 4 x SP2004 and assign them to each cores ... not 2 orthos
E6600 @ 3.6
IN9 32x MAX
EVGA 8800Ultra
750W
Nope i havnt tried anything harder as yet..this cpu is performing better than my E6600 on less vcore.
so im hopeing 4ghz..but not untill i have my chill control back.
im blind atm what i see temp wise is only Gosple.
orthos you need 2 x orthos running for 100 % load..and yes i will run 4x sp004 just give me a chance i have had cpu 2 days...
boy u ask alot of questions...
did i answer them correctly
i cant handle anymore than 1 question heeh 2 blew me away rofl
Last edited by HoriWanderFuLL; 04-26-2007 at 01:34 AM.
Asus COMMANDO -Intel Q6600 @ 3.6Ghz 401x9 have sum test @ 445x9 4GHZ :-)
2x74 Gig Raptors Raid 0..GSKILL 6400 2x1Mb matchd Pair.-OCZ 550w Powerstream adjustable rails- XE2 Vapochill -pioneer Dvd.-2x160 Gig Hitachi ide drives..-Asus 7600 gs video card
http://www.hwbot.org/user.do;jsessio...C3?userId=8636
Wow thats awesome! nice one.
Btw guys, im getting my Q6600 tomorrow, whats the best way to test all 4 cores.
Kentsfield Q6600@ 3100Mhz
Asus P5B-E Plus
2GB GSkill DDRII PC6400GBHZ
Albatron Geforce 8800GTX
Silverstone Temjin TJ-09
Thermalright Ultra 120
Corsair 620W HX
74GB Raptor/ X-Fi Platinum
19" CRT NEC 930 SB
Windows XP Pro SP2
can someone just answer the question as to whether you can lower the multi with an XBX2?
i dont wana run my memory at anything other than 1:1
also, virtualrain, i love your avatar. who is that?
Rig:
Q6600
Intel BadAxe2
Tuniq 120 Tower
G.Skill HZ 4x1GB
BFG 7900 GS OC (558/675) now MSI HD 7770
WD Raptor 150GB (Primary)
2 x Seagate 320Gb 7200.10 (Storage; No RAID)
Corsair 620Watt
Samsung SH-W183 SATA drive
AuzenTech X-Meridian
Antec A900 Case
I have a Tuniq 120 Tower in my new pc. The size, in relation to others on the market, is directly proportional to the size of my penis. Therefore it is large.
and thick.
If thats 9x401 from bios youd be better of with 9x400.
Give P95 v252 a go.
Last edited by Viss; 04-26-2007 at 04:59 AM.
Well since nothing but Extreme series chips seem to be able to be adjusted according to the BadAxe2 thread, I would venture a guess that.. no... the Q6600 is not adjustable with current BIOS's but I have no first hand knowledge.can someone just answer the question as to whether you can lower the multi with an XBX2?
Better place to ask the question is the BadAxe2 thread. At least you'll likely get more responses.
3770K @ 4.8Ghz 1.42V | GSkill 2x4GB @ 1066Mhz | Asrock Extreme4
2600K @ 4.5Ghz 1.38V | GSkill 2x4GB @ 933Mhz CAS 9-10-9 1.5v | Asrock Z68M/USB
1090T @ 3.8 Ghz 1.42V | Crucial 4x2GB 666 CAS 8 | Asus M4A79XTD EVO
Q6600 @ 3.66Ghz(8x458) 1.35V | GSkill 2x2GB @ 550Mhz 5:5:3:13 2.1V | Asus Maximus Formula(Rampage 0401) |
no you can not adjust the multiplier. at least i haven't been able to.
i had no problem running the ram at 5:4 or 3:2.
Was there / is there, a QX6600. It seems like either there was at least engineering samples...
http://www.devhardware.com/c/a/Compu...adro-Review/1/
http://www.xtremesystems.org/forums/...d.php?t=142026
listening in - considering Q6600/QX6700 when the next price cut sets in
any specific steppings to look for?
Last edited by xt0m; 04-26-2007 at 10:59 AM.
Oh blah?
Don't expect any price cuts on any of the "X" series processors...
listening in - considering Q6600/QX6700 when the next price cut sets in
any specific steppings to look for?
When it's good it's really good...And when it's bad I go to pieces...
I just got my q6600 today, as far as the multiplier, I can set it in the bios with my p5b deluxe and according to CPUz the multiplier is changed. The strange thing is the bios post screen and bios info say I'm running 3.6ghz but cpuz reports 3.2ghz 400x8.
Also another thing, no problems at all with 4gb 4x1gb of memory and 400fsb so far with initial testing with my old Asus P5B Deluxe.
Last edited by highoctane; 04-26-2007 at 12:16 PM.
Work Rig: Asus x58 P6T Deluxe, i7 950 24x166 1.275v, BIX2/GTZ/D5
3x2048 GSkill pi Black DDR3 1600, Quadro 600
PCPower & Cooling Silencer 750, CM Stacker 810
Game Rig: Asus x58 P6T, i7 970 24x160 1.2v HT on, TRUE120
3x4096 GSkill DDR3 1600, PNY 660ti
PCPower & Cooling Silencer 750, CM Stacker 830
AMD Rig: Biostar TA790GX A2+, x4 940 16x200, stock hsf
2x2gb Patriot DDR2 800, PowerColor 4850
Corsair VX450
Well, just hoping..
http://www.dailytech.com/article.aspx?newsid=6488
Despite the mild Q2’2007 price cuts, Intel plans to aggressively cut prices on its complete lineup in Q3’2007, with the exception of the recently launched Core 2 Extreme QX6800.
Hope the QX6700 wont be totally phased out by then
Oh blah?
IIRC, B0 ES were fully unlocked
retired computer enthusiast
I Know but it wont boot at 400 fsb blue screens of death.
but boots upt to 435 fsb :-)
i think the high end of the strapp is to much for system to handle ??
Asus COMMANDO -Intel Q6600 @ 3.6Ghz 401x9 have sum test @ 445x9 4GHZ :-)
2x74 Gig Raptors Raid 0..GSKILL 6400 2x1Mb matchd Pair.-OCZ 550w Powerstream adjustable rails- XE2 Vapochill -pioneer Dvd.-2x160 Gig Hitachi ide drives..-Asus 7600 gs video card
http://www.hwbot.org/user.do;jsessio...C3?userId=8636
Try raising NB voltage.
Safe limit of nb voltage is ??i havnt raised it over 1.45 as yet.
motherboard is commando standerd heatpipe with big fan over top of NB
Asus COMMANDO -Intel Q6600 @ 3.6Ghz 401x9 have sum test @ 445x9 4GHZ :-)
2x74 Gig Raptors Raid 0..GSKILL 6400 2x1Mb matchd Pair.-OCZ 550w Powerstream adjustable rails- XE2 Vapochill -pioneer Dvd.-2x160 Gig Hitachi ide drives..-Asus 7600 gs video card
http://www.hwbot.org/user.do;jsessio...C3?userId=8636
Mine does something similar. BIOS reports my Q6600 at 3.2Ghz, when it's only at 8x360.
Whats stock Vcore for Q6600 guys?
My stepping is
SL9UM
L640A763
Kentsfield Q6600@ 3100Mhz
Asus P5B-E Plus
2GB GSkill DDRII PC6400GBHZ
Albatron Geforce 8800GTX
Silverstone Temjin TJ-09
Thermalright Ultra 120
Corsair 620W HX
74GB Raptor/ X-Fi Platinum
19" CRT NEC 930 SB
Windows XP Pro SP2
The bad axe 2 will not allow you to adjust multis on any chip that is locked.
Only chips you can lower or raise the multi on is the extreme.
Most other boards will allow you to lower the multi and go for a higher FSB.
DFI 680i LT
Intel Q6600 @ 3.2 Quad Prime Stable @1.3675 and climbing. VRM Temps issues now.
Apogee GT, Laing D5, BI Stealth 240, EK 8800GTX WB
EVGA 8800GTX @ 625/1000 Load Temps 49c
2x Raptor 74GB, 4x WD 400GB, 2xSegate 7200.10 500GB
Lian Li V2000 Black
PCP&C Turbo Cool Custom 1KW
Asus P5B-DLX 340x9 stock vcore
Take a quad core system Install Windows, VMWare and 2 instances of Linux. Assign each vm 2 procs. Set the affinity to cpu's 1 and 2 to the first one, and 3 and 4 to the second.
Looks like about 3077 ppd with P2608's 13 minutes per frame per vm.
I knew where I was when I wrote this...
I don't know where I am now.
GB P35-DS3R q6600@3.15 Kubuntu Linux
Asus P5B-DLX q6600@3.0 Ubuntu Linux
GB 965-DS3 e6420@3.2 Gentoo Linux
Asus Commando e6420@3.2/1950XTX Winders/VMWare/Kubuntu
MSI Neo2 Plat Opty170@2.8 Debian Linux times 2
IMac 2ghz c2d OSX 10.4
Xeon Dualie 3.2Ghz Ubuntu 6.10 times 2
that bloody sucks
Rig:
Q6600
Intel BadAxe2
Tuniq 120 Tower
G.Skill HZ 4x1GB
BFG 7900 GS OC (558/675) now MSI HD 7770
WD Raptor 150GB (Primary)
2 x Seagate 320Gb 7200.10 (Storage; No RAID)
Corsair 620Watt
Samsung SH-W183 SATA drive
AuzenTech X-Meridian
Antec A900 Case
I have a Tuniq 120 Tower in my new pc. The size, in relation to others on the market, is directly proportional to the size of my penis. Therefore it is large.
and thick.
Posting Permissions
Reply With Quote
Bookmarks