Hi, i have TWO new this boards, but no one works with my Enermax PSU! I´ve tested it with TWO Enermaxes (620W, 1000W) and still not working, boards are still restarting, no boot, no posts only circle of restarts ... i´ve tested TWO RAMs, TWO GFX and still the same.
Has someone this Mobo with Enermax PSU? And working?
Are you sure those power supplies aren't dead? And I might consider taking one of those boards off your hands if you don't want one....
-----------------Main Setup-----------------
Processor: Intel C2D E4600ES @ 3.4 Ghz
Motherboard: Abit AW9D-Max
Heatsink: Cooler Master GeminII HSF
Graphics Card: eVGA 6800GS 515//1320 (hacked SLI)
RAM: 2x 1Gb GeIL Ultra UDCA= DDR2 800Mhz cas 4
RAM: 2x 1Gb Crucial Tenth Anniversary DDR2 667Mhz cas 3
Hard Drive (Primary): 1 x 200Gb Seagate EIDE
Hard Drive (Secondary): 1 x Seagate 160GB SATA
Hard Drive (Secondary): 1 x Seagate 300Gb SATAII
DVD-RW Drive: 1 x Lite-on CD-RW/DVD-RW
Power Supply: Antec Basiq 500W
hehe, they are OK because on my other mobos is everything perfect, i am sure this is problem with some compatibility Enermax + DFI P965-S ...
That reminds me of my ultra-D to Seasonic S12.
Hopefully the problem is something else. Enermax PSUs are very famous in Germany and many people have them...
オタク
"Perfection is a state you should always try to attain, yet one you can never reach." - me =)
It is your 1000W unit the DXX or older model?
SB Rig:
| CPU: 2600K (L040B313T) | Cooling: H100 with 2x AP29 | Motherboard: Asrock P67 Extreme4 Gen3
| RAM: 8GB Corsair Vengeance 1866 | Video: MSI gtx570 TF III
| SSD: Crucial M4 128GB fw009 | HDDs: 2x GP 2TB, 2x Samsung F4 2TB
| Audio: Cantatis Overture & Denon D7000 headphones | Case: Lian-Li T60 bench table
| PSU: Seasonic X650 | Display: Samsung 2693HM 25,5"
| OS: Windows7 Ultimate x64 SP1
+Fanless Music Rig: | E5200 @0.9V
+General surfing PC on sale | E8400 @4Ghz
If you can separate the 8 pin connector use it as a four pin. It should boot up.
I´ve tested 620W Liberty, 400W Liberty, and 1000W Galaxy ...
Separate 4-pin and full 8-pin - the same situation, today i ordered new OCZ 720W PSU, i will see where is problem ...
Weird. DFI will always be picky with PSU's. Please post back with results. I would like to know for my own knowledge.
Proved, Enermax Liberty 500W, Liberty 620W and Galaxy dont work with this DFI mobo! I have now OCZ Evostream 720W and everything works like a charm. It is some ground problem on the mobo i think.
Damn, guess I got lucky with my enhance 500w and ultra 500w. too bad first time I went to flash bios, it nuked. Maybe your bios bad?? Far fetch theory, probably not true.
E8400 8x500=4000 | ABIT IP35-E
2x2GB Tracer PC2-6400 1:1 500MHz 5-5-5-15 2.0V
Galaxy 8800GT 800/2000/1100 1.3V | 80GB X25-M G2 + 1.5TB 7200.11 | XFiXG
Fuzion | MCW60 | DDC2+Petra | Coolrad22T+BIP1
Merom 13x133=1733 1MB L2 0.950V
I have TWO mobos with original BIOS from factory ... 26/03 ... no flashing myself ...
I have another problem ... look at : http://csd.dficlub.org/forum/showthr...0442#post20442
I have the Liberty 620 with this board and it has been working fine for me using the 8 pin connector. Now memory, that's a different story.
Gigabyte Z68XP-UD4
i7 2600K
GSkill F3-12800CL8T-8GBXM
Crucial M4 128Gb SSD
WD Caviar Blue 640GB x 3
Asus Geforce GTX460
Seasonic x650
Lian Li PC-9F
Win7 HP x64 SP1
thanks god im buyed OCZ power supply
|::| i7 920 3849A914
|::|EVGA Classified 760
|::|G.Skill Trident 6GB DDR3-2000
|::|BFG GTX 275
|::|G.Skill Falcon 2 128GB
|::|WD BLACK 1TBx2
|::|Ultra X3 1000W
|::|Powered by Heatkiller LT/Ek-Classified/EK 275GTX /Feser x360/MCP355x2
|::|LCD: Samsung T260
"Sharing your knowledge is always the best way to learn new things". OPB
did you mean vacuum cleaner?Originally Posted by hausner
thanks god im buyed OCZ power supply
Posting Permissions
Reply With Quote
Bookmarks