Quote Originally Posted by hotchoc View Post
Gtj & shimmishim any comments on this?

Trying to hit 3.6Ghz stable

Below are my settings
~~~~~~~~~~~~~~~~~~
FSB = 400X9 (bios 2333)
vcore = tried 1.55 to 1.6
vmch = 1.6 to 1.7
vfsb = tried 1.4to 1.45
vdimm = 2.2
timings = 5-5-5-15
ram ratio = 266:533 (1:1)
idle temps = 51-52C
load = 68-71C

* failed orthos in less than 5 secs.
** pass/errror free memtest+86 at 400FSb (4-4-4-12 and 5-5-5-15) for 2 hrs
***C1E disabled via C1E inf file, EIST disabled, power slope enabled, VT disabled, all unused ports (parallel, 1394, cpu fan control) disabled

Please help !!!
you shouldn't need more than about 1.4 vfsb and 1.625 vmch. these were the values i used to get 9 x 400 with mem at 3-3-3-8 timings 1:1.

only other thing i can suggest you try is to put a fan over the NB assuming you haven't changed it out for something else.