Testing / comparing : Intel D975XBX2 / Asus P5B DX ***56K WARNING***

[nealh]

Ok i just flashed to bios 2333. Everything is stock. What i did was i disabled C1E, enabled powerslope in bios and installed no C1E file via XP.

Once i clicked on core temp the whole thing just reboots. Happened twice already. First time managed to spot a BSOD and the second time it just reboots by itself.

What's going on ???

I owuld jumper back to maintenance mode..ie 2-3 jumper position and enter bios and check what the settings are...

I would load optima default...reboot..reset jumper and just load up windows/OS and make sure everything is OK

the nreboot and retry entering the bios

I bet the ram timings or vdmm is off

EDIT: OOPs..which coretemp are you using I have heard issues with 0.95...if your using this get 0.94(if you need I can send it to you)

[hotchoc]

I owuld jumper back to maintenance mode..ie 2-3 jumper position and enter bios and check what the settings are...

I would load optima default...reboot..reset jumper and just load up windows/OS and make sure everything is OK

the nreboot and retry entering the bios

I bet the ram timings or vdmm is off

EDIT: OOPs..which coretemp are you using I have heard issues with 0.95...if your using this get 0.94(if you need I can send it to you)

nah i checked the ram timings n vdimm after goign thru the maintainence bios. it's all good 4-4-4-12 @ 2.04vdimm. windows xp will be ok running as logn i don't open cpu z or coretemp together. usign everest for nwo to monitor my temp. weird thing was, this never happened when i was in bios 2663.

yeah am using 0.95

do pm me the 0.94 link if possible

thks