The 500MHz+ CAS 3 Club

[Xtreme Addict]

Miravo, I'm having those exact same problems lol. When my computer is off for a short period of time (No power to the PSU), my computer refuses to boot because the lack of Vdimm. I have to attach SMD grabbers to get an extra vdimm boost, usually takes 2.65v just to post. Then it works fine after that lol.

It sounds strangely familiar I have "wall" at 2,4v. Mems wants 2,4v to boot Then, I can lower volts to even 2,3v... but nothing less I can't RMA them yet, because they do 600 MHz 5-5-5-15 2,35 ~ 2,45v stock... But they overclock worse and worse. Firstly, I was able to do SPI 4-4-4-4 2,45v 600 MHz on P5B Deluxe . Now I can't even boot at this frequency Then, after playing 3,2v one stick started to have problems with booting on relax timings... then another... After about 10 sessions with voltage 2,75 ~ 3,3v sticks became completely unbootable with default bios values. (I have to boot computer with some other ram, set very strict alphas, set high voltage (2,4 and above) and then I am able to work completely stable at voltage ~ 2,4 and above. But overall OC lowered enormously

My teams mostly love setting 500 MHz 3-3-3-8 @ 2,9 They boot everytime at this value

[SMa]

It sounds strangely familiar I have "wall" at 2,4v. Mems wants 2,4v to boot Then, I can lower volts to even 2,3v... but nothing less I can't RMA them yet, because they do 600 MHz 5-5-5-15 2,35 ~ 2,45v stock... But they overclock worse and worse. Firstly, I was able to do SPI 4-4-4-4 2,45v 600 MHz on P5B Deluxe . Now I can't even boot at this frequency Then, after playing 3,2v one stick started to have problems with booting on relax timings... then another... After about 10 sessions with voltage 2,75 ~ 3,3v sticks became completely unbootable with default bios values. (I have to boot computer with some other ram, set very strict alphas, set high voltage (2,4 and above) and then I am able to work completely stable at voltage ~ 2,4 and above. But overall OC lowered enormously

My teams mostly love setting 500 MHz 3-3-3-8 @ 2,9 They boot everytime at this value

I had simular problems with my D9GMH.
After giving them 3.15v they wouldn't boot at a vmem between 1.95 and 2.3v.

[Xtreme Addict]

After some testing, mems aren't stable at 600 2,4 ~2,45v... And have problems with booting. Is this enough reason for RMA'ing them? And will be any problem with varranty?

@SMa

And mems are still alive?

[dj883u2]

This is my result with ram 2x1Gb Cellshock 1000@1074mhz a cas 3-3-3-8.



By

[Xtreme Addict]

Voltage? and CAS3 from bios?

[dj883u2]

Voltage? and CAS3 from bios?

3.25V.
Cas 3 from bios, and with boot to cas 3-3-3-8.
By

[marcolecorse]

[SMa]

@SMa

And mems are still alive?

if you mean "do they still work?"
yes
but alive and kicking
... no

[Viss]

Thats very very fast for 4.5ghz Gautam On 1066 strap x-4-x is faster, boot above 400 and trcd3 should be fine.