not a bad 2.4

**KennethChong** · 09-01-2003, 05:20 PM

cpu on stock volts, 256x 2 GEIL PC4200 (3.2v), max 3, waterchilled (man this killed my waterchiller)

12x 345

**FragMagnet** · 09-01-2003, 05:29 PM

Nice ! Impressive bus speeds from that Max3. What's the highest FSB that you've ran you Raptors in Raid 0, and on which controller ?

**KennethChong** · 09-01-2003, 05:36 PM

Well im not using them in this system if thats what you think, i use them with my 3.2, but in answer to your question, highest ive got them to was 272 i belive. Cant do anything other than 66/33 with them though

**KennethChong** · 09-01-2003, 05:38 PM

oops, trying to post the smaller pic up and somehow i cant post an attatchment on my first post for some reason :/ here it is, sorry.

**brwmogazos** · 09-01-2003, 05:39 PM

I got a Geil PC4200 kit as well mate...am not able to see their max though as my chip is a 3.0C so 255fsb 24/7 prime stable is what i am running it at the moment.

How high have you been able to push your Geil sticks mate with what timings?

**FragMagnet** · 09-01-2003, 05:42 PM

Originally posted by KennethChong
Well im not using them in this system if thats what you think, i use them with my 3.2, but in answer to your question, highest ive got them to was 272 i belive. Cant do anything other than 66/33 with them though

I was just wondering if there was a fsb limit caused by the SATA raid set-up. Neither of my 2.8's exceed 260 fsb, I assume it's the chips, but thought I'd ask.

**KennethChong** · 09-01-2003, 05:42 PM

Originally posted by brwmogazos
I got a Geil PC4200 kit as well mate...am not able to see their max though as my chip is a 3.0C so 255fsb 24/7 prime stable is what i am running it at the moment.

How high have you been able to push your Geil sticks mate with what timings?

2.5/4/3/7 right now, this is the highest ive got it so far, might try for more tommorow.

**brwmogazos** · 09-01-2003, 06:02 PM

thats xcellent mate...mine can do 2.5 4 3 6 @ 255fsb+...

What fsb are u running them @ ?

**KennethChong** · 09-01-2003, 06:06 PM

345 right now, im really liking them so far, need to push them a littel more though

i think there good for it.

**KennethChong** · 09-01-2003, 06:19 PM

there we go, here are some better temps, res is starting to cool down.

**FragMagnet** · 09-01-2003, 06:34 PM

So in the set-up pictured above, how long does it take to cool the res ? I assume the AC is running steady when in use, and not cycling ?

**FragMagnet** · 09-01-2003, 06:41 PM

Sorry, wrong thread

**hedge** · 09-01-2003, 06:43 PM

Originally posted by KennethChong
345 right now, im really liking them so far, need to push them a littel more though i think there good for it.

Do you mean you are running your ram at 1:1 ratio? Becuase that is what it sounds like and that would be freaking awesome.

**KennethChong** · 09-01-2003, 06:50 PM

naw, 3:2 right now, i havnt tried 1:1 yet, just trying to see how far i can get this chip.

**NyCUndaGrounD** · 09-01-2003, 06:53 PM

Yea thats pretty awesome.

I'd really think that sata drives in raid would limit your overclock.
I have tried, and done 4 ghz no prob. on a ide WD 40gb hd. But i had trouble when using a raptor raid system to oc. I had the PCI/AGP fixed when ocing with the raptors.

Id like to see him get higher fsb. Itll be crazy.

**KennethChong** · 09-01-2003, 06:59 PM

350 @full load

**Xenogias** · 09-01-2003, 07:05 PM

thats a very nice clock man. A couple questions: What speed are those mem modules running? I assume 3:2 divider or maybe the 5:4? is it stable for anything at 345x12? What northbridge voltage and northbridge cooling are you using? That is a really nice chip and exceptional o/c.

**afireinside** · 09-01-2003, 07:05 PM

Nice job man

Hows this compare to your 3.2 bench wise? Speeds pretty close to each other but the FSB is a ton higher on this.

I think over 4 ghz on a 2.4ghz chip is more than "not a bad 2.4" :p

**KennethChong** · 09-01-2003, 07:10 PM

3:2, so 525mhz if my math is right. It was pretty stable at 345, i just failed prime after like 8 calculations, im guna mess around in bios and see what i can do.

It has a ton more bandwith for sure

Havnt really tested out anything 3d on it yet though, only have an old gf2 card on here.

**Spec3** · 09-01-2003, 07:41 PM

Whats the info on that cpu? ie batch code and pack date?

I just fried mine a need a new one

Thanks
Steve

**STEvil** · 09-01-2003, 07:49 PM

Your 5v is hurting, kenneth 8-)

**x2sandman** · 09-01-2003, 07:58 PM

holy crap that a hell of a overclock at stock voltage, pump that sucker up!

I would also like to know the batch of that chip becuase im in the market for a new intel chip

**KennethChong** · 09-01-2003, 08:07 PM

Originally posted by STEvil
Your 5v is hurting, kenneth 8-)

yea my +12 is at 11.61 right now

Sorry i dont have the numbers for it. A buddy of mine said he had a good ocer and let me buy it off him, dindt know it would do this good

when i take the cpu out ill be sure and give yall the numbers off the top.

**Creative** · 09-01-2003, 09:11 PM

Nice OC Kenneth

Yer Im wondering if my Raptors in RAID0 have hindered my OC also.....I might grab one of the Maxtor fluid bearing drives as a spare and try some OCs on it

OffTopic, but Kenneth, what was the martial arts stuff you did again? I was trying to explain to my mate the other day and got it mixed up I think

hehehehehehe

**[SLC]Tachyon** · 09-01-2003, 10:10 PM

Any extra cooling on the northbridge?

Thread: not a bad 2.4

Thread Tools

Search Thread

Display

not a bad 2.4

Bookmarks

Bookmarks

Posting Permissions