OK finally stable at this
vcore = 1.3875
vfsb = 1.300
vmch/vich = 1.550
FSB = 345X9 @ 3105
Idle temp = 42-45C
Load Orthos = 55-60C
Orthos stable = 8hrs blend ok/9hrs small fft ok, SuperPi = ok, OCCT = 30mins blend ok, XP = stable, memtest86+ = 3hrs ok
1. Are my temps ok ? Used to be lower but it rose by 3-5C after i changed the position of my HSF. Need to in order to install my Thermalright HR-05 nb cooler
2. Given my temp and the rate i'm going, would it be advisable to increase vcore to say 1.5 to reach my goal of 3.6Ghz?
Many thks in advance
Reply With Quote
Bookmarks