RD600 first look and general questions

[nealh]

Mine used to do that, when the chipset was getting to hot. Cooled the chipset a bit and no problems after.

Nope..chipset hits about 60/62 underload and will run P95 blend with chipset between 60-62C for 26hrs

My current cooling is stock HS with 120mm fan on my ram and chipset..HS get warm at best not really hot


This is not temp related on the chipset dont buy it for 1 sec....I was running at 1.36v and under or at 60c with P95 for 20 hrs plus on P95 blend, at 3500:450 and then 2 days later no longer stable

cpu temps at load are about 53-55C..my ambients are 23-24C

I my ram never received more than 2.2v in bios....but I guess it could be the culprit

[dasa]

How dangerous is raising NB PLL 1.8v? it seems i need a lot more than most
2.03 will boot at 390fsb and every 10fsb after that needs it to be put up another notch 430fsb 2.41v is as high as i have tried so far
or is there another way to get the fsb higher without raising this that i have missed?
Thanks

e6600 storm G5
2x1g team xtream 6400 4-4-4-10 can do 400 3-3-3 2.3v and 533 4-4-4 2.44v
x1900 xfire
pcp&c 510

pwm ~25c chipset ~50c
cpu depending on v 35 idel ~55-65c load
core temp shows ~20c idel ~35-45c load