My CPU is currently at 333mhz FSB x9 at 1.35v (1.34 in windows) idle temps are around 36c in Probe II and 46c-47c in load according to Probe II (with orthos 8 hours) 100% stable with RAm at stock speed/timings/voltage and also superpi 32m is stable.

Coretemp shows something totally different, idle temps in 46c for core0 and 47 for core1 :S
Dont know why

I can go up to 350mhz FSB but I need more vcore (1.38v I think) and once I reach 375mhz it will boot but is unestable, orthos wont run for more than 10 mins.

I did the heatsink mod because it worked for Koc (putting HR-5 in the SB and NB) and I still dont get to boot at 400mhz FSB not even with 1.50vcore so what Im thinking is the RAM which is the last thing that is left to think about. Thats why im planning to change it. I also heard from some sites that Corsair is not recommended for the Striker and it is not recommended when overclocking with the striker.

itznfb, thanks for that, Ill keep an eye on this topic this afternoon to see what you got, Ill be happy if you tell me that you got some Micron chip , also please dont forget to write where you bought it and when you bought it.
BTW, I would also appreciate if you tell me the procedures to remove the heatspread to see what IC you have, once I buy my memory I want to check that out.

Final question, are the D9GCT bad or what?