The boards are the same, expect for the solid caps on the DS3 and that is all to it.Originally Posted by norain
Just like the dfi expert board and the dfi venus, people flash venus bios on the dfi expert board and it work fine.
The boards are the same, expect for the solid caps on the DS3 and that is all to it.Originally Posted by norain
Just like the dfi expert board and the dfi venus, people flash venus bios on the dfi expert board and it work fine.
Hi Dumo, thanks for the review! When using the Super Talent memory did you try to see if the board would boot with just one stick? Right now the Super Talent 667 is selling for less than $50 a GB stick and with a voltage boost will do 4-4-4 @ DDR2 800; it would be great if there was a way to get this memory to work with the Gigabyte 965P-S3! Perhaps a recent BIOS fixed this? Thanks in advance!
Must see video/documentary: The Money Masters: How The International Bankers Gained Control of America also available via bittorrent.
"These are the rules. Everybody fights, nobody quits. If you don't do your job I'll kill you myself.
Welcome to the Roughnecks"
"Anytime you think I'm being too rough, anytime you think I'm being too tough, anytime you miss-your-mommy, QUIT!
You sign your 1248, you get your gear, and you take a stroll down washout lane. Do you get me?"
Heat Ebay Feedback
my ewiz 2x1gig supertalent 667 DDR2 is running fine on an S3 @ 800mhz 2.1vdimm! (F6 bios)
Last edited by spinejam; 03-31-2007 at 08:11 AM. Reason: add info
i7-920 (3951A424) @4015 w/ HT (191x21) & CM V8
Asrock x58 Extreme (bios p2.30)
3x2gb OCZ Platinum DDR3 @1530Mhz (7 7 7 21 1T)
Asus 5770 @1000c 1400m 1.25v
2 Samsung F3 1TB Drives in RAID0 (128k stripe)
2 Samsung SH-203N 20X DVD-RW Drives
CoolerMaster HAF-922 // Corsair TX650 PS
Hanns-G HG-281D 28" LCD
Nice o/c for a S3. My Asus P5B vanilla retails for about $10 over the S3, but I can reach 520FSB x 7 = 3640MHz with my E6300 @ 1.44 vCore. So if we are talking FSB per $1, the P5B would probably come out on top. (Although we don't know what FSB I could reach with the 8X multiplier in the E6400).
I could probably increase the FSB with more voltage, but my cooling is not up to scratch with such extreme o/c. The base P5B vanilla with few o/c features is not a handicap. My early production E6300 and Crucial Ballistix PC6400 ram running at 520MHz @ 4-5-5-12 with 2.1 vDimm, pick up the slack.
To reduce core temps for everyday use I have backed off to 470FSB @ 1.32 vCore, with all other setting on Auto. She runs stably and cool at that clock frequency, Cap'n
Bookmarks