Results 1 to 25 of 40

Thread: X2 3800 or Opteron 165?

Threaded View

  1. #35
    Xtreme Enthusiast
    Join Date
    Jul 2006
    Location
    Harstad, Norway
    Posts
    622
    That looked kindof nice for stock cooling I must say... the one with the x2's literarily blow snot! But I must also say it was a lousy finish on it.. lots of scratches, what's that all about... some indonesian who REALLY hates his job?

    The fourth wire is for a fourth pin... if your mb don't have the fourth pin the fan probably will only run on lowest volt, propably 7V or so... Had a fan for the hyper 48 cooler that wouldn't run at 12V, only 7.... So if your cpu-fan connecter only have 3pins, only plug in anyway, the fourth only runs on mb with PWM.... which is fourth pin..'


    lot's of four pins mentioned there... sorry bout that
    Last edited by freakBYnature; 03-31-2007 at 12:10 PM. Reason: forgot a question
    1st System Setup:
    Asus A8N32-SLI Deluxe
    Opteron 170 @ 2.8 GHz @ 1.45V LCB9E 0651MPMW
    CORSAIR XMS-PC4000-TWINX2048-4000PT UCCC! 2.65V @ DDR466 3-4-4-8 1T (Personal record: 2.5V @ DDR520 3-4-4-8 1T)
    Gainward 7950GX2
    ZALMAN CNPS 9700 LED

    MIST/Cooltek 600W ATX 2.2 PSU

    2nd System Setup:
    DFI Lanparty Ultra-D
    AMD Athlon 3000+ @ 2.7 GHz, 1.4V - LBBLE 0517DPMW
    BigTyp 120 VX or the stock Opteron cooler
    G.Skill PC4800 DDR600 3-4-4-8 @ 2.7V
    Gainward BLISS 7300GS
    330W "PowerMan" PSU

    Previous projects... - Sold: AMD Athlon 64 FX60 CCB2E 0608BPMW - One broken AMD Athlon 64 3800+ x2 Manchester @ 2.7 GHz! LDBHE 0601TPMW - Motherboard from HELL: DFI LANPARTY UT CFX3200-DR! - Powercolor Radeon X1800XT 512MB! @ 655/1548 MHz using CCC (Personal record using ATI-tool 24/7 stable: 702/1700MHz)


    World Community Grid!
    Link to XS-TEAM!
    Accumulated Points: 581,644
    Current Ranking: 9,911

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •