After a week or so I testing I've finally gotten stable at 3.8 using VCore set in bios to 1.6875 (after VDroop = 1.63) I'm Orthos stable as I write this for 1 hour. My Core temps started at -20c at peeked at 40c. Not to bad, I think with all those volts. I'm sure this chip needs these volts since I crash in Orthos at any lower setting. SHOULD I PUSH HIGHER? I would probably need to set Vcore at 1.75 since it would drop to around 1.68 to get 3.85 stable.
Bookmarks