32m Low Clock Challenge

[esdee]

Ahhh..a benching cascade and a 24/7 cascade....good idea!

Edit: I think you need more fans :p

the 'weak' cascade was made from spare compressors, we bought some new parts and here you go, a cute little cascade, i load tested in that bench session !the bench cascade is the very powerfull ,
can you say 12000 BTU r410 rotory?

[s7e9h3n]

the 'weak' cascade was made from spare compressors, we bought some new parts and here you go, a cute little cascade, i load tested in that bench session !the bench cascade is the very powerfull ,
can you say 12000 BTU r410 rotory?

Sheesh...12k BTU?....I'd go crazy having to listen to it run I've got a single stager with a 8-10K BTU Rotary and that thing drives me nutz....It's even louder than my autocascade

[esdee]

Sheesh...12k BTU?....I'd go crazy having to listen to it run I've got a single stager with a 8-10K BTU Rotary and that thing drives me nutz....It's even louder than my autocascade

combine that with the second stage that uses a tecu compressor like the one in your auto and the 690CFM papst on the condenser and you have a bench cascade , see ? thats a bench cascade

[s7e9h3n]

combine that with the second stage that uses a tecu compressor like the one in your auto and the 690CFM papst on the condenser and you have a bench cascade , see ? thats a bench cascade

I'm fine with my little 1hp hermetic Tecumseh in my "bench" autocascade I'll be throwing a x6800 under the evap today...we'll see how she handles a load

[Viss]

Impressive Esdee. On 965 chipset 620mhz 32M with those timings and vdimm is

[esdee]

Impressive Esdee. On 965 chipset 620mhz 32M with those timings and vdimm is

just testing a bit more, the mem can do 650Mhz 32m stable with the same timmings 2.7Vdimm and 1.7VMCH, too lazy to reboot with USB support and copy the screenshot!

now back on topic

[Gautam]

What memory is that exactly? Team 6400C3?

[esdee]

What memory is that exactly? Team 6400C3?

1200HC5

[andre X_X]

[dinos22]

I'm fine with my little 1hp hermetic Tecumseh in my "bench" autocascade I'll be throwing a x6800 under the evap today...we'll see how she handles a load

nice let us know how it goes

[eva2000]

this one is an old bench i did on kayl FrozenSS 1/4HP phase change

sub 12min run @4282mhz

[Gautam]

Alright, just to prove to y'alls that I do get what this thread is about, how about I kick off the sub 11m category?

Vapor deserves at least as much credit as me for this--we also relied on tips from before, k|ngp|n and Fredyama...thanks to them all.

[MidnightMadness]

C2D E6600 - Abit AB9 QuadGT - 2 x 1GB Crucial 667 10AE

3960MHz - 12'08.609s
FSB 440MHz x 9; RAM 550MHz



3496MHz - 13'32.609s
FSB 437MHz x 8; RAM 546MHz

[Vapor]

Alright, just to prove to y'alls that I do get what this thread is about, how about I kick off the sub 11m category?

Vapor deserves at least as much credit as me for this--we also relied on tips from before, k|ngp|n and Fredyama...thanks to them all.

Dude....you made me sit in the corner of the room while it was running! Then again, we had reason, everytime I'd walk by the monitor, it would crash

Anyway, here's an easier to read camera shot with as much moire removed as I could....hopefully we can get the real screenshots off the HDD soon



Thanks again to all that helped with this

[esdee]

Gautam nice time !

let me setup my phase and my 11 multi

[Gautam]

Dude....you made me sit in the corner of the room while it was running! Then again, we had reason, everytime I'd walk by the monitor, it would crash

Anyway, here's an easier to read camera shot with as much moire removed as I could....hopefully we can get the real screenshots off the HDD soon

My apologies Mr. Photoshop. And yes, there certainly was something creepy going on last night...but your contributions to the setup before we hit the "OK" button were very valuable.

Gautam nice time !

let me setup my phase and my 11 multi

No fair. Who decided that ram like yours could exist??

Seriously it'll be awesome to see what you can pull off with that golden pair. Hope to see it under cascade/LN2 soon, now that'd make quite a bang.

[Oldscarface]

Here is my best score up till now.

Specs :
Asus Commando
Core 2 Duo E6600 @ 3969 Mhz (9 x 441 Mhz, 1,53 Volt bios)
2x1GB Crucial Ballistix PC8000 @ 661.5 5-5-4-4-7 (2,5 Volt bios)
Everything is air cooled (cold air)

[dinos22]

NICE RAM MAN

lovely time too

[Misko]

Oldscarface this is really good m8

p.s. Can u try max at 3.6ghz 8x450@2:3 or little bit less?

[Dekara]

Awesome ram clock, !!!

[esdee]

No fair. Who decided that ram like yours could exist??

Seriously it'll be awesome to see what you can pull off with that golden pair. Hope to see it under cascade/LN2 soon, now that'd make quite a bang.

actually it's a golden pair, but nowhere like hand picked, it's actually a borrowed pair (although i feel like buying them ) from a shop in greece

cascade day is tomorrow, lets hope everything runs fine! the chip is benchable 32m @ 52xx but coldbug kicks in really soon with LN2, so this cascade should be @ the sweetspot, wish me luck!

[dinos22]

Oldscarface this is really good m8

p.s. Can u try max at 3.6ghz 8x450@2:3 or little bit less?

that should do sub 13m as well

[Gautam]

Here is my best score up till now.

Specs :
Asus Commando
Core 2 Duo E6600 @ 3969 Mhz (9 x 441 Mhz, 1,53 Volt bios)
2x1GB Crucial Ballistix PC8000 @ 661.5 5-5-4-4-7 (2,5 Volt bios)
Everything is air cooled (cold air)

Heh, I was just telling kp earlier today that no one has beaten his sub 12m speeds yet, but it seems like that's changed. Very impressive...further shows how important raw bandwidth is for SuperPi performance.

actually it's a golden pair, but nowhere like hand picked, it's actually a borrowed pair (although i feel like buying them ) from a shop in greece

cascade day is tomorrow, lets hope everything runs fine! the chip is benchable 32m @ 52xx but coldbug kicks in really soon with LN2, so this cascade should be @ the sweetspot, wish me luck!

Sounds like a winning combo indeed. Hope it all works like a charm together.

[alpha0ne]

Thats a seriously nice time Oldscarface

[eva2000]

Now with Hipro Maximizer installed on P5B Deluxe again. The same limitations exist though to OCZ PC2-9200 FlexXLC, the memory is optimized for CAS5 (5-5-4-x) performance.

Just checking out what I can do for the Super Pi 32M low clock challenge

Just make it under 15 minutes with Q6600 @3190Mhz with memory @591mhz 5-5-4-5 at 2.43v vdimm