what would you say is best, screw fitting barbs (compression) like the pics that EK has shown or just reg barbs where you put a worm drive on:?
what would you say is best, screw fitting barbs (compression) like the pics that EK has shown or just reg barbs where you put a worm drive on:?
Please correct me if I'm wrong, but aren't you rather limited to the tubing sizes as well as the thicknesses if you opt for the compression fittings?
For the mosfets and chipsets, 10mm tubing may be sufficient for flow, depending on how restrictive the block are, but you're looking at some relatively thin walled tubing.
i7/930 - Noctua NH-C12P
Rampage III Extreme - (2) evga 9800GTX
Corsair AX-1200 - 12GB PGS312G1600ELK
(2) VelociRaptor 150GB - (2) Raptor 160GB - WD Caviar 2TB
LG GGW-H20L Blu-Ray - Plextor PX-880SA - X-Fi Titanium Fatal1ty
Silverstone TJ07 (mostly) Aluminum Case
Eddy, What is the status on the mosfet blocks for EVGA680i?
My New Rig My OLD Rig
Case: Mountain Mods - U2-UFO Horizon Black Powder Coat - Original Top
Power Supply: Enermax Galaxy Gaming Edition 1000W Power Supply EGA1000EWL-DXX
Motherboard: EVGA NVIDIA nForce 680i SLI ATX
CPU: Intel Core 2 Extreme QX6700 Kentsfield 2.66GHz
Ram: Dominator 4GB (4 x 1GB) DDR2 1066 (PC2 8500)
CD / DVD burner: Plextor PX-755SA internal Serial ATA
Hard Drives: SeaGate HD 250Gig 7K 8M SATA2 ST3250824AS / SeaGate HD 500Gig 7K 16M SATA2 ST3500630AS
Water Cooling: Swiftech H20-220 Apex Ultra CPU Liquid Cooling Kit / EK NF4 On the SB / DD-680i Chipset Block / 2 - Danger Den Delrin Fillport / DD-D5 Pump / 7/16" ID (5/8" OD) Masterkleer / PA120.3 with shroud
Fan Controller: Sunbeam 5.25" Chromatic Windmill Full Function Fan Controller Black
Fans: 2-120MM Aerocool XtremeTurbine Silver / 2-Thermaltake A2018 120mm Blue LED / 4-SCYTHE S-FLEX 120mm
Misc: 4 Cathode Tube UV / 5-12 Cathode Tube UV
Hey guys, I thought I'd share this with you. Here's a pic of my build underway with Eddy's blocks on the SB, NB and MOSFETs on the Striker board. EK blocks will be going on the twin 8800's as well. As pretty as his CPU block is, I wanted the proven performance of the Fuzion.
Last edited by $+\/Ψ; 03-14-2007 at 03:58 PM.
~$+\/Ψ~
Nice WC parts thereExpensive for me tho :p
DFI Lanparty UT X58-T3EH8 + Intel Core i7 i920
Originally Posted by $+\/Ψ
Hey guys, I thought I'd share this with you. Here's a pic of my build underway with Eddy's blocks on the SB, NB and MOSFETs on the Striker board. EK blocks will be going on the twin 8800's as well. As pretty as his CPU block is, I wanted the proven performance of the Fuzion.
[QUOTE=$+€\/Ø;2069520]Hey guys, I thought I'd share this with you. Here's a pic of my build underway with Eddy's blocks on the SB, NB and MOSFETs on the Striker board. EK blocks will be going on the twin 8800's as well. As pretty as his CPU block is, I wanted the proven performance of the Fuzion.
Dude! That's going to be my setup also, except I will be using the Swiftech Apogee GTX due to barbs spacing reason of the FuZion. My brand new FuZion is up for sale.
Am assuming you will be running 2 separate loops? How are you going to run your tubing, especially from a 3/8" to the 1/4" FlexXLCs?
Yup, two separate loops. The CPU, NB and GPUs are on one 1/2" loop and the RAM, SB and MOSFETS are on a 3/8" loop with a 4 x 1/4" splitter through the RAM like this:
~$+\/Ψ~
Pure WC :banana::banana::banana::banana:.. reallyHey guys, I thought I'd share this with you. Here's a pic of my build underway with Eddy's blocks on the SB, NB and MOSFETs on the Striker board. EK blocks will be going on the twin 8800's as well. As pretty as his CPU block is, I wanted the proven performance of the Fuzion.
I love those RAM WC blocks. I'm curious about their performance as well as their compatibility with most MB's and RAM sticks. Do they work with Dominators and also what will be required to use them? I'm imagining a mess of tubes....Pure WC :banana::banana::banana::banana:.. really
Posting Permissions
Reply With Quote
Bookmarks