CoolerMaster Geminii vs Scythe Infinity vs Samurai vs Noctua vs Zalman 9700 2nd round

[PcCI2iminal]

the test is very simple
QX6700 @ 3200mhz (vcore-> 1.34v Bios),10 mins of prime for all,2 San Aces 120mm @ 104CFM for all ,with the best fan configuration(push/push)
no mounting mods and they are not lapped
the room temp is 22C and all the tests had been made in two hours



Coolermaster Geminii -->60 61 60 60


Scythe Infinity-->62 61 60 60


Scythe Andy Samurai Master-->63 62 61 61


Noctua NH-U12F-->66 66 63 65


Zalman 9700-->67 67 65 66





MB->P5B Premium
CPU->Kentsfield QX6700 @ 3200mhz(1.34v)
RAM->Crucial 6400
VGA->Gladiac 6800GS
HDD->Hitachi 40GB
Room temp->22C

[L'enFer]

PcCI2iminal, amazing! Infinity is just like GemeniII . so, is that way of fan mounting better?

[arschgrampe]

thx man for this nice review

tuniq and ultra 120 in this comparison would be

[Kenetixx]

Nice work, Gemini looks impressive .

[NormanABates]

nice review.......
thanks for the effort dude

[SaII]

thx man for this nice review

tuniq and ultra 120 in this comparison would be

yha I think everyone would like to see how it compares to tuniq and thermalright

[enz660]

awsome review dude, you are the man. Why did you mount the fans on the infinity like that? From the #'s ive seen, it seems to perform worse that way...

edit: also... is that infinity mounted w/ the plastic pins or bolts? It automatically does roughly 5c better once the mount is modded.

[couppi]

awsome review dude, you are the man. Why did you mount the fans on the infinity like that? From the #'s ive seen, it seems to perform worse that way...

edit: also... is that infinity mounted w/ the plastic pins or bolts? It automatically does roughly 5c better once the mount is modded.

It looks like he's using the plastic pins.

It would be nice if pc2iminal would a test with bolts and normally mounted fans. Otherwise, nice test. Gemini owns.

[L'enFer]

enz660, i asked him to do this. When i tested my Infinity i had reached best results with it.

[PcCI2iminal]

awsome review dude, you are the man.
edit: also... is that infinity mounted w/ the plastic pins or bolts? It automatically does roughly 5c better once the mount is modded.

plastics pins

i have no screws and bolts ,for the next update the mod will be done

[PcCI2iminal]

Why did you mount the fans on the infinity like that? From the #'s ive seen, it seems to perform worse that way...

enz660, i asked him to do this. When i tested my Infinity i had reached best results with it.

so, is that way of fan mounting better?

this way seems to be the same for me

[IKIKUINTHENUTZ]

lol premodded quad fan Infinity
http://www.jab-tech.com/Scythe-Infin...r-pr-3719.html

Are you going to attempt this mod in next round?

[Scyth3]

I would think that would be better cause the air hits all the pipes directly. The other way, the pipes hide behind each other.

[Supertim0r]

I bought 3 Geminii, we'll see if it beat the Tuniq

[erwinz]

I bought 3 Geminii, we'll see if it beat the Tuniq

will wait for your results..

[L'enFer]

IKIKUINTHENUTZ, according to my experience i can say there will be no perfomance increasing.

[Rol-Co]

I bought 3 Geminii, we'll see if it beat the Tuniq

it will beat the tuniq...... still testing but this is already nice

3800mhz x6800


3900mhz x6800


Don't think the tuniq will beat that

[Nazu]

lol premodded quad fan Infinity
http://www.jab-tech.com/Scythe-Infin...r-pr-3719.html

Are you going to attempt this mod in next round?

Four fans plus the heatsink...that's gonna weight like 1.5kg. That thing better have a modded mounting, I mean the stock plastic pins may not be enough to hold that thing on place.

[enz660]

lol premodded quad fan Infinity
http://www.jab-tech.com/Scythe-Infin...r-pr-3719.html

Are you going to attempt this mod in next round?

2 more fans than needed my friend... all you need are two fans + pressure mounting.

[oharag]

Thanks PcCI2iminal for your hard work :-)

Your work led me to purchase a GEMIN II

[barzi]

nice review. i didn't knew that you could buy the Geminii in stores. I saw it today and it was only 31 euro (in The Netherlands). The tuniq tower is 45 euro.

[RealTelstar]

nice review. i didn't knew that you could buy the Geminii in stores. I saw it today and it was only 31 euro (in The Netherlands). The tuniq tower is 45 euro.

Nice, its in EU already
Do they ship to other EU countries? Please PM me the website of this shop if it's online.

[wa2000]

PcCI2iminal: Can you please check the coolermaster part number on your GeminII/風神匠?

Because from Coolermaster Japan site, the part number for 風神匠 is RR-CCH-ANU1-GP.

From the Coolermaster world site, the part number for GeminII is RR-CCH-ANU2-GP.

I wound if there's any difference between GeminII and 風神匠? Because they have different part number.

[PcCI2iminal]

PcCI2iminal: Can you please check the coolermaster part number on your GeminII/風神匠?

Because from Coolermaster Japan site, the part number for 風神匠 is RR-CCH-ANU1-GP.

From the Coolermaster world site, the part number for GeminII is RR-CCH-ANU2-GP.

the part number is RR-CCH-ANU1-GP

wound if there's any difference between GeminII and 風神匠? Because they have different part number

i think is just about marketing

Japan->風神匠(God Wind) RR-CCH-ANU1-GP
World->GeminII RR-CCH-ANU2-GP

[PcCI2iminal]

I bought 3 Geminii, we'll see if it beat the Tuniq

just put a good fan on it and you will love that cooler

TuniQ vs CoolerMaster will be sweat