32m Low Clock Challenge

[dinos22]

Why only 2.80GHz ??, is it on strike or somfin

400MHz FSB 1067 strap.........i guess i could clockgen higher too....actually that's probably not a bad idea but i don't know how high it would bench at that strap as i've never really tested

one other reason for 400MHz is becuse i can run the RAM at 600Mhz .......my 4:5 ratio struggled at 500MHz which suxors

[alpha0ne]

Sounds to me your just getting lazy

[dinos22]

Sounds to me your just getting lazy

30 fast approaching in September.....i feel like it's time to slow down a little

[alpha0ne]

30 fast approaching in September.....i feel like it's time to slow down a little

Hehehe my Son is older than you

[dinos22]

Hehehe my Son is older than you

i knew that

[before]

ahh guys; I've killed 1 module of the Wintec kit... Really don't know why... After the loss of performance of my STT kit, I'm starting to think the Commando is suspicious!!

I've noticed it doesn't give good Vdimm... for instance; once you can get 2.65V with a particular setting, and after the following boot Vdimm can be obviously 2.73V... so Commando owners be careful! It may be only a matter with mine... but...

[alpha0ne]

Damn Anus and their buggy Vreg

[SLi_dog]

i am out of any decent CPUs now just my trusty E6300

Hey dinos............look here


Ya slack arse




@before, sorry to hear about the hardware loss mate

[Gautam]

ahh guys; I've killed 1 module of the Wintec kit... Really don't know why... After the loss of performance of my STT kit, I'm starting to think the Commando is suspicious!!

I've noticed it doesn't give good Vdimm... for instance; once you can get 2.65V with a particular setting, and after the following boot Vdimm can be obviously 2.73V... so Commando owners be careful! It may be only a matter with mine... but...

That's exactly what I was fearing.

[wa77ss]

ouch..

[before]

That's exactly what I was fearing.

yea; be careful bro

[hipro5]

Get a DDR Maximizer......we want to sell hardware too.....

Sorry about your loss before.....I know the feeling......

[s7e9h3n]

Get a DDR Maximizer......we want to sell hardware too.....

Sorry about your loss before.....I know the feeling......

That's EXACTLY what I was going to say as well

[before]

I start thinking about it...

[dinos22]

:O new interface....well borders hehe


Before that is awful man

[dinos22]

Hey dinos............look here


Ya slack arse

it's pot luck with CPUs....would be nice to bump into a decent stepping

[k|ngp|n]

ahh guys; I've killed 1 module of the Wintec kit... Really don't know why... After the loss of performance of my STT kit, I'm starting to think the Commando is suspicious!!

I've noticed it doesn't give good Vdimm... for instance; once you can get 2.65V with a particular setting, and after the following boot Vdimm can be obviously 2.73V... so Commando owners be careful! It may be only a matter with mine... but...

Ouch! my Commando should finally be here tommorrow and that's good to know...you still think it was the board?? Try any other sticks with it?? I will bypass the vdimm ciruitry with the maxi prolly anyways.
How is the ln2 testing going on that chip btw??

[s7e9h3n]

it's pot luck with CPUs...

LOL...I think you mean "crap shoot"?

[before]

Ouch! my Commando should finally be here tommorrow and that's good to know...you still think it was the board?? Try any other sticks with it?? I will bypass the vdimm ciruitry with the maxi prolly anyways.
How is the ln2 testing going on that chip btw??

Yea; I'm pretty sure the problem is the board.

I've quickly tried my new container on a E6600 and a X6800... it looks good; but I've to wait for another X6800 tomorrow; a L624A610, same FPO/BATCH than the one of OC_Windforce; hope to be lucky too. Anyway, week 24 doesn't seem to be a bad one.

[Gautam]

My Commando's here...DOA.

Perhaps 965 and I just aren't meant for each other.

[spectrum48]

evening gents

are little 6300's allowed?

14m 10.656sec @ 3.6ghz

no 'special' tweaks, 1333 strap too

[dinos22]

evening gents

are little 6300's allowed?

14m 10.656sec @ 3.6ghz

no 'special' tweaks, 1333 strap too

the idea is to get sub 14m , sub 15m, sub 16m times .....etc

so you either should drop the CPU MHz so that your time finishes around 14m 5Xs or increase the CPU MHz to go under 14m in something like 13m 5Xs time

your time is nice for 1333 strap

[spectrum48]

the idea is to get sub 14m , sub 15m, sub 16m times .....etc

so you either should drop the CPU MHz so that your time finishes around 14m 5Xs or increase the CPU MHz to go under 14m in something like 13m 5Xs time

your time is nice for 1333 strap

thanx

i'll try again soon

[dinos22]

My Commando's here...DOA.

Perhaps 965 and I just aren't meant for each other.

oh man what the hell is going on with Commandos they are popping dead all over the place lol

maybe try the DFI version and see how long that one lasts lol

[before]

My Commando's here...DOA.

Perhaps 965 and I just aren't meant for each other.

Oops sorry to hear bro Did you try a long clear CMOS?

On my side I've some pretty good news; I've received a X6800 L624A610 and it loaded Win at 5.2GHz@1.64V DMM (Vcore mod didn't work ) under -118C pot temp.

Can't wait to see this chip with 1.8V or 1.9V... Might be a killer one!