Retail Abit IN9 32X-MAX - Pictures, observations and testing...

**linflas** · 03-09-2007, 05:29 AM

nbb: swiftech waterblock
sbb: Thermaltake xtreme spirit 2 with 40mm fan
PWM: cut copper from socket 478 cooler I had laying around

**~~Philly_Boy~~** · 03-09-2007, 09:46 PM

Originally Posted by linflas

nbb: swiftech waterblock
sbb: Thermaltake xtreme spirit 2 with 40mm fan
PWM: cut copper from socket 478 cooler I had laying around

I am waiting for my shipment from MIPS for my PWM water block.

Darn, linflas, that loop looks clean. *hats off to you*

**ettis** · 03-10-2007, 04:37 AM

It seems when using QX6700 and increasing the multiplier only two out of the four cores actually responds when using the new 1.1 bios.
Can anyone else confirm that?

**Johnny Bravo** · 03-10-2007, 07:10 AM

Originally Posted by ettis

It seems when using QX6700 and increasing the multiplier only two out of the four cores actually responds when using the new 1.1 bios.
Can anyone else confirm that?

True, though there is a new BIOS to fix that on the way

**NeoRecon** · 03-10-2007, 09:19 AM

LOL. It is good to hear that they are actively working on this BIOS still..and maybe they can fix with a bios update instead of the entire mobo swap out that evga is doing right now.

**JargonGR** · 03-10-2007, 10:06 AM

Funny but the new BIOS did not change a lot for me but it did correct some small issues I had. Whenever I was restarting through VISTA it would hang now it goes smooth.

For overclocking it seems that my CPU can not go any further no matter what. E6600 @ 3.7GHZ 411FSB at 1.6250 Vcore. What it seems a waste though is that it could do 3.6GHZ 1.45v on air and only 3.7GHZ on a dedicated waterloop. Makes me wonder whether water was worth it for 100MHZ.

**sedg.raven** · 03-10-2007, 07:06 PM

Hello i have a issue but i have no idea if is from the mother or memories, the problem is: i can put the memories at 1150mhz in unlinked but if i try to pass from here when i enter in win and see cpuz the memories are at 900mhz and reboot and enter in bios and is true the memories are de-configured and is in unlinked and set at 450mhz, and if i try to set it in linked 1:1 when i set it and enter in win are set at 900mhz another time, an enter in bios and is changed and set in unlinked 400mhz

, and the epp is only anto configured or 800mhz 1T or 1066mhz i have no idea and i so sad i pay 680USD for the memories

bye

**linflas** · 03-10-2007, 09:05 PM

Originally Posted by Philly_Boy

I am waiting for my shipment from MIPS for my PWM water block.

Darn, linflas, that loop looks clean. *hats off to you*

Thanks, this is my loop, 1/2" masterkleer tubing, all swiftech, older apogee, and using the 8800 brackets on the gpu's, ddc12 pump with petra's top.

**\/ENDE][A** · 03-11-2007, 04:47 AM

This is my current 24/7 setup. Board unmodified still on shipping bios and i haven`t touched the heatpipes. Just added 40mm fan to NB and 80mm fan aimed @ PWM area. Temps on PWM in low 40`s whatever i`m running, heat is not an issue here.

Voltages set in bios as follows...
Cpu - 1.4650v
DDR2 - 2.1v
Nb - 1.50v
SB - 1.60V
CPU VTT - 1.40v
HT - 1.40v

I have had it over 3.8Ghz, but waiting to finish water loop before pushing any further. Cpu cooled with Freezer 7 Pro.