New 4000+ Sandy WR & A64 non FX WR

**starostise** · 02-20-2007, 10:20 AM

héhé

**stunned_guy** · 02-26-2007, 11:57 PM

My 0632 GPMW 4000+ is so freaky but had its wall @ 3,3 Ghz and 1,408 V prime stabil under single stage. I tried much more vcore, changed multis and so on but nothing changed. So it is no wonder that I couldnt break the record of starostise...only 3787 Mhz were possible

**~~crazyclocker86~~** · 02-27-2007, 12:44 PM

Man nice results congrats on the WR

**starostise** · 02-27-2007, 03:32 PM

Originally Posted by stunned_guy

My 0632 GPMW 4000+ is so freaky but had its wall @ 3,3 Ghz and 1,408 V prime stabil under single stage. I tried much more vcore, changed multis and so on but nothing changed. So it is no wonder that I couldnt break the record of starostise...only 3787 Mhz were possible

yep. seeing gianni-gt's 3700+ with that temps i was thinking that a 4000+ with a good stepping could break 4Ghz barrier easy with x12 multi but it seems to be very difficult.. it s just luck

i found that with the same stepping, the one who has a higher TDP (shown with core temp) is always better.

my 4000+ was 50W tdp and got 65°C in full with only 1.5v under my freezer 64 pro and 21-22°C ambiant

**gianni-gt** · 02-28-2007, 12:21 AM

i think i've found the one who can crack the 4ghz, but the guy wouldn't sell it

maybe i'll win in the lottery, then i pay 1k $ for this baby...

**Hystrix^** · 02-28-2007, 01:24 AM

Addict

**BadNizze** · 03-09-2007, 07:19 AM

Hello!
This is a small uppdate of my Old Kab1e 0626FPMW 4000+, I sold it to a friend over att Techsweden.org, whom has a Mach1 and he did, this http://i148.photobucket.com/albums/s...ta/3508Mhz.gif He is aming for 3,6ghz prime next. BTW what is the prime WR for none FX A64´as? Best Regards from sweden

**stunned_guy** · 03-09-2007, 12:52 PM

The prime wr for AMD non-FX is about 3530 Mhz from gianni-gt: http://bastel-gianni.ripping.org/ove...4bpmw_3530.jpg

your test is not really stabil because its the false prime with the false test, no blend, large fft´s or custom only !!!

**gianni-gt** · 03-10-2007, 01:26 AM

Originally Posted by BadNizze

Hello!
This is a small uppdate of my Old Kab1e 0626FPMW 4000+, I sold it to a friend over att Techsweden.org, whom has a Mach1 and he did, this http://i148.photobucket.com/albums/s...ta/3508Mhz.gif He is aming for 3,6ghz prime next. BTW what is the prime WR for none FX A64´as? Best Regards from sweden

what was the batch of your cpu, again?

**BadNizze** · 03-10-2007, 12:31 PM

Originally Posted by gianni-gt

what was the batch of your cpu, again?

Bach: 1489588F61065, Kab1e 0626 FPMW\\BadNizze

**stunned_guy** · 03-15-2007, 09:51 AM

Is there anyone of you who is interested in some good amd athlon64 san diego / clawhammer cpus ? If yes please pn me

**Turrican** · 03-15-2007, 10:56 AM

next week or so, i'm getting a 4000+ 0633 epmw, so count me in for some action.
hopefully without coldbug.

**Bigchrome** · 03-15-2007, 11:09 AM

I'm currently lapping my X2 4200+ 0601SPMW (not a very good clocker) and I will see what I can get out of it this weekend with DICE.

**gianni-gt** · 03-16-2007, 12:10 AM

dual-cores? who cares

**stunned_guy** · 03-16-2007, 01:29 PM

Hehe gianni you are right

**gianni-gt** · 03-16-2007, 05:02 PM

my new 0626FPMW: http://valid.x86-secret.com/show_oc.php?id=178200

water-cooling @ 8°C, vcore @ 1.77V, cpu-temp @ 20°C

**stunned_guy** · 03-17-2007, 01:02 AM

You have to get some more...about 250 Mhz. But for water a good job

**Tipharet** · 03-20-2007, 01:10 AM

Damn.

I actually got 3 off stock voltage primed for 12 hours @ 36 max load and I was pretty impressed, but these results are amazing. I had no clue! I could prolly do more with the chip, but my Neo 4 board maxes at 255 FSB.

For 24/7 use I think this is a pretty good OC. Should I aim for more for 24/7 stable usee

Any general recommendations?

AMD 64 4000 @ 3.0
Zalman CNPS9500-LED
MSI K8N Neof-F s939
Corsair XMS Dual Channel (1 gig @166 2.5-3-3-7)
Nvidia EVGA 7600gt
Ultra 500 Watt PSU
Aerospeed Extreme Engine 3T Case
Windows Vista Ultimate

**gianni-gt** · 03-20-2007, 12:53 PM

little update from my 4000+ under water (+2.5°C).... cpu-temp: 15°C, vcore 1.8V

http://valid.x86-secret.com/show_oc.php?id=178504

tomorrow i'll get my new power-chiller (SC15)...

**stunned_guy** · 03-21-2007, 10:23 AM

Gianni I´m getting nervus...

But I will be proud if you will catch some records back....our little contest isn't at its end

**Chrono Trigger** · 03-22-2007, 11:05 AM

I got my A64 4k+ at 3,2GHz on WC. 3,05GHz max on air :mrgreen:

**gianni-gt** · 03-26-2007, 04:29 PM

knock knock.... place 3 is mine... http://valid.x86-secret.com/show_oc.php?id=181353

cpu-temp: +7°C, vcore: 1.9V

**Turrican** · 03-27-2007, 01:31 AM

omfg, awesome result gianni

**Schmetterling** · 03-27-2007, 07:37 AM

Originally Posted by gianni-gt

knock knock.... place 3 is mine... http://valid.x86-secret.com/show_oc.php?id=181353

cpu-temp: +7°C, vcore: 1.9V

Very nice work my friend! I bought myself a 4000+ (KAB1E 0626 FPMW) which does 3Ghz on stock volts no problem. (28 hours orthos stable) Thinking about getting WC/Chiller to get some more out of it

O BTW, got a nice set of TCCD based ram as well 350Mhz 3-4-4-8 @ 2.9v and got a 280Mhz 2-2-2-5 BH-5 comming my way

**OCPerformance** · 03-27-2007, 08:45 AM

not bad here some 2x512MB Sticks

@HTT320 1:1 Corsair Twinx1024 3200XL TCCD
Timings 2,5.4.4.7.12.14.4.3.2.4 @ 2,8 Volt + 120 Lüfter

@HTT335 1:1 G-Skill PC3200/4000 GBLE 2x512 ohne ES
Timings 2,5.4.4.7.17.19.4.3.2.4 @ 3,2 Volt + 120 Lüfter

@HTT340 1:1 Geil one PC3200/4800 ES 2x512 without HS
Timings 2,5.4.4.7.17.19.4.3.2.4 @ 3,2 Volt + 120 Lüfter

Thread: New 4000+ Sandy WR & A64 non FX WR

Thread Tools

Search Thread

Rate This Thread

Display

Bookmarks

Bookmarks

Posting Permissions