MMM
Page 16 of 51 FirstFirst ... 61314151617181926 ... LastLast
Results 376 to 400 of 1275

Thread: 32m Low Clock Challenge

  1. #376
    Xtreme Legend
    Join Date
    Mar 2005
    Location
    Australia
    Posts
    17,242
    Rick the idea is the have the scores at XXm 5Xs at lowest possible CPU MHz

    i don't know what funkflix's result is doing there but you see all the other ones are around 13m 52-58s and the lowest MHz CPU wins the round basically

    so my allendale run is a shocker because the CPU is a B5 Step5 and have 2MB L2 cache .....so for me to improve there i would need to first of all get a B2 Step6 which is quicker clock for clock and use an E6600 with 4MB cache and the best possible RAM combination....ideally 1200MHz with tightest possible timings or clockgen to 450MHz FSB with 4:5 divider and RAM at 563MHz 4-4-4-x which is impossible on my motherboard with 4:5 ratio

    out of that bunch this is the quickest time because bachus_anonym achieved SUB-14m superpi time with lowest CPU speed

    3604.1......camouflage...............13.52.609
    3596.3......alpha0ne...................13.54.297
    3600.9......eva2000....................13.56.422
    3800.1......dinos22................... ..13.57.187
    3392.2......bachus_anonym...........13.57.485
    4000.........funkflix.......................14.03. 781
    Last edited by dinos22; 02-18-2007 at 09:13 PM.
    Team.AU
    Got tube?
    GIGABYTE Australia
    Need a GIGABYTE bios or support?



  2. #377
    Xtreme Member
    Join Date
    Aug 2006
    Location
    Warsaw, Poland
    Posts
    148
    Allendale 7x374 4:5 4-4-4-4-4-20-4-9-4-9, Asus Commando
    17:59.813s
    Not a bad one I think , still without Copy Waza .

    Last edited by JMKS; 02-20-2007 at 10:34 AM.

  3. #378
    Broke 13sec with 3600mhz and 600mhz on my 6400c3's:

  4. #379
    Dr. / Professor
    Join Date
    Apr 2004
    Location
    Phoenix,USA
    Posts
    760
    Thanks for the suggestion rick and for the explaination dinos. I hope this is good for now. At the start I wanted to include as many people as possible to get people interested and get the thread going. It may need some revision and housekeeping now. I will try to check here more as I don't seem to get the email notification everytime there is a post. Excellent time k|ngp|n. dinos, it looks like we need to get busy again. Post has been updated.
    8 hrs Prime @ 4500 (9x500) DDR-1200
    9.59 32m Pi @ 4810 (8.5x566)
    9.59 32m Pi @ 4gb DDR 1248
    700 Club @ 7 x 585 CPU-Z Val
    Prime @ 542 x 7 (4 hrs 1.28v)
    32m 5006 (9.48)

    OC Formula 3770k-dl G.Skill 2666 C10 Galaxy 660Ti 3gb Apogee HD PlextorM5P xfx p850
    MVF 3770k Team 2600 C10 xfx 7850 2gb xspc RayStorm HyperX 3k Hyper 730
    Gigabyte EP45-UD3P e8500 Crucial 8500 khx9600 evga 9800gtx PCP&C 610 H20 by Coop




  5. #380
    Xtreme Cruncher
    Join Date
    Feb 2003
    Location
    Estonia
    Posts
    1,097
    17.XX category
    This was really not done for this challenge, but it does meet the requirements


    Nothings tweaked, even had antivirus running
    Last edited by anubis; 02-24-2007 at 12:16 PM. Reason: missed some important info
    Member of XS WCG since 2006-11-25




  6. #381
    Admin
    Join Date
    Dec 2003
    Location
    Hillsboro, OR
    Posts
    5,225
    Quote Originally Posted by k|ngp|n
    Broke 13sec with 3600mhz and 600mhz on my 6400c3's:


    Plenty have been waiting to see sub 13m at 3.6GHz flat forever, plenty have come close but no one's quite nailed it till just now. WTG Vince, you definitely have this game down.

    Btw, if you want another another lil challenge check this out.

    I think I've hit the final straw...these 965 mobos on the 2:3 are just untouchable. It's about time sometime gave them a shot for serious clocks.

  7. #382
    Memory Addict
    Join Date
    Aug 2002
    Location
    Brisbane, Australia
    Posts
    11,651
    Quote Originally Posted by k|ngp|n
    Broke 13sec with 3600mhz and 600mhz on my 6400c3's:
    http://www.overclockingpin.com/12min...%203600mhz.jpg
    nice vince congrats that's

    777.188 x 3603.4 = 2,800,519

    very efficient there

    I did this on Asus 680i striker



    794.859 x 3599.9 = 2,861,413
    ---

  8. #383
    Xtreme Member
    Join Date
    Aug 2006
    Location
    Warsaw, Poland
    Posts
    148
    Another result of my Allendale, 6x391 this time => 19m58.922s


  9. #384
    Quote Originally Posted by Gautam


    Plenty have been waiting to see sub 13m at 3.6GHz flat forever, plenty have come close but no one's quite nailed it till just now. WTG Vince, you definitely have this game down.

    Btw, if you want another another lil challenge check this out.

    I think I've hit the final straw...these 965 mobos on the 2:3 are just untouchable. It's about time sometime gave them a shot for serious clocks.
    Thanx man
    Really having a blast tweaking 32m with the lower clock speeds...who says you need run 3d with ln2 and monster clocks to have a good time lol
    Decided to take you up on that sub 4ghz challenge, but just realized after 2hrs or so of benching that the results in that thread are 1m and not 32m rofl.
    Anyways, here is the fruit of my labor this morning. I will try for somw 1m at 4ghz next:
    11min 53sec at 4ghz flat:


    Quote Originally Posted by eva2000
    nice vince congrats thats

    777.188 x 3603.4 = 2,800,519

    very efficient there
    I did this on Asus 680i striker
    thanx and very nice time on 680i eva!
    Last edited by k|ngp|n; 02-25-2007 at 10:44 AM.

  10. #385
    Xtreme Addict
    Join Date
    Mar 2004
    Posts
    1,835
    Nice result. Have you tried 680i any?
    Intel FTW!

    Beanna

  11. #386
    Quote Originally Posted by NiCKE^
    Nice result. Have you tried 680i any?
    Can't say I have run pi on 680i much. Faster than 965/975?
    damn..that chick in your avatar is smokin!!

  12. #387
    Admin
    Join Date
    Dec 2003
    Location
    Hillsboro, OR
    Posts
    5,225
    Not according to any current results.

    965 seems to be the king when used with those bigass mem clocks and 1066 strap. 680i looks pretty good after all...but seems a bit behind 965.

    I think the next slowest speed that anyone was able to pull off sub 12m was in the 4.1 gig range, another great time there.

  13. #388
    approaching aphelion
    Join Date
    Nov 2005
    Location
    Aix-en-Pce | France
    Posts
    1,616
    Nice time Vince! hehe I need a good 2Gb kit to challenge you...

    Prior to this run, did you try it first w/o waza?
    Last edited by before; 02-25-2007 at 11:02 AM.
    Best Regards,
    Xavier


    "I prefer to fly alone... when alone, I perform those little coups of audacity which amuse me..." Col. René Fonck (1894-1953), the Ace of Aces.

  14. #389
    Xtreme Member
    Join Date
    Aug 2006
    Posts
    261
    Any guesses on how many days it would take on the Pentium-90 in my garage? I'd like to see 90MHz matched though.



    Don't make me break it out.

    Core i5 760 3.6GHz daily | Gigabye P55-USB3 rev2.0 | Thermalright Ultra-120 Extreme | 2 x 4GB Corsair XMS3 | AMD Radeon HD 4830 | CM 690 |

  15. #390
    Xtreme Addict
    Join Date
    Mar 2004
    Posts
    1,835
    Quote Originally Posted by k|ngp|n
    Can't say I have run pi on 680i much. Faster than 965/975?
    damn..that chick in your avatar is smokin!!
    With thight subtimings it should be atleast as good as 975 from what eva2000 said. Then you can run 1T also but it will probably need like 480ish before you can see it be equal between 1T and 600 2T.
    Intel FTW!

    Beanna

  16. #391
    Xtreme Legend
    Join Date
    Mar 2005
    Location
    Australia
    Posts
    17,242
    Quote Originally Posted by NiCKE^
    With thight subtimings it should be atleast as good as 975 from what eva2000 said. Then you can run 1T also but it will probably need like 480ish before you can see it be equal between 1T and 600 2T.
    nah i don't think you'll be able to beat 975x/965x but one advantage it does have is maxing out RAM so you may beat it in some instances if intel chipset runs out of dividers
    Team.AU
    Got tube?
    GIGABYTE Australia
    Need a GIGABYTE bios or support?



  17. #392
    Team KOC2.com
    Join Date
    Nov 2005
    Location
    Indonesia
    Posts
    986
    Last edited by andre X_X; 03-14-2007 at 09:17 PM.

    E8600 Q820A750
    DFI LanParty UT P35-T2R - Abit IX38 QuadGT - Asus P5B Deluxe - Biostar TP45 HP
    Team Xtreem PC-5300 C3 2GB - Crucial 10th Anniversary 2GB - Team Xtreem PC8500 C5 2GB
    Winfast 8600GT
    Silverstone Olympia 1000w
    andre X_X -72c CO2 Cascade

    My R22/CO2 Cascade Project

  18. #393
    Memory Addict
    Join Date
    Aug 2002
    Location
    Brisbane, Australia
    Posts
    11,651
    Quote Originally Posted by NiCKE^
    With thight subtimings it should be atleast as good as 975 from what eva2000 said. Then you can run 1T also but it will probably need like 480ish before you can see it be equal between 1T and 600 2T.
    it's close but still 680i will be a bit behind but the gap is alot smaller than what was first thought
    ---

  19. #394
    Xtreme Legend
    Join Date
    Mar 2005
    Location
    Australia
    Posts
    17,242
    this i need to get a B2 stepping this is killing me grrrrr
    Team.AU
    Got tube?
    GIGABYTE Australia
    Need a GIGABYTE bios or support?



  20. #395
    Xtreme Addict
    Join Date
    Feb 2005
    Location
    OZtralia
    Posts
    2,051
    Quote Originally Posted by dinos22
    this i need to get a B2 stepping this is killing me grrrrr
    I've got one you can swap for
    lots and lots of cores and lots and lots of tuners,HTPC's boards,cases,HDD's,vga's,DDR1&2&3 etc etc all powered by Corsair PSU's

  21. #396
    Memory Addict
    Join Date
    Aug 2002
    Location
    Brisbane, Australia
    Posts
    11,651
    LOL alpha

    Well 1 second faster at 3600mhz, and also did 3612mhz and 3647mhz runs to see what it takes on 680i striker to hit sub 13min 05s times for 32M





    ---

  22. #397
    Xtreme Legend
    Join Date
    Mar 2005
    Location
    Australia
    Posts
    17,242
    Quote Originally Posted by alpha0ne
    I've got one you can swap for
    lol i need something that can do 3GHz with a little less vcore......what did you say you need again 1.6v ROFL
    Team.AU
    Got tube?
    GIGABYTE Australia
    Need a GIGABYTE bios or support?



  23. #398
    k|ngp|n/Sham my brothers
    Join Date
    Aug 2002
    Location
    Athens---Hellas
    Posts
    5,693
    Quote Originally Posted by k|ngp|n
    Broke 13sec with 3600mhz and 600mhz on my 6400c3's:

    Ha, ha, ha......NICE GOING there Vince......
    INTEL PWA FOR EVER

    Dr. Who my arss...

    .........



  24. #399
    Xtreme Addict
    Join Date
    Mar 2004
    Posts
    1,835
    Quote Originally Posted by eva2000
    it's close but still 680i will be a bit behind but the gap is alot smaller than what was first thought
    Ah okey, then I misunderstood you.
    Intel FTW!

    Beanna

  25. #400
    Dr. / Professor
    Join Date
    Apr 2004
    Location
    Phoenix,USA
    Posts
    760
    Last edited by coop; 02-27-2007 at 10:23 PM.
    8 hrs Prime @ 4500 (9x500) DDR-1200
    9.59 32m Pi @ 4810 (8.5x566)
    9.59 32m Pi @ 4gb DDR 1248
    700 Club @ 7 x 585 CPU-Z Val
    Prime @ 542 x 7 (4 hrs 1.28v)
    32m 5006 (9.48)

    OC Formula 3770k-dl G.Skill 2666 C10 Galaxy 660Ti 3gb Apogee HD PlextorM5P xfx p850
    MVF 3770k Team 2600 C10 xfx 7850 2gb xspc RayStorm HyperX 3k Hyper 730
    Gigabyte EP45-UD3P e8500 Crucial 8500 khx9600 evga 9800gtx PCP&C 610 H20 by Coop




Page 16 of 51 FirstFirst ... 61314151617181926 ... LastLast

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •