Originally posted by Fushyuguru
What purpose is that larger section of tubing providing, as there is already a strainer/drier (Im assuming thats what it is, before the cap tube on the other side of the compressor.

Because if I can just relocate that larger piece of tubing then I should be good.

Also, does anyone know if Asetek brazed or soldered those connections? I can tell exactly. Looks more like brazing. If its solder I should just be able to heat the joint up and seperate the tubing correct?

BTW thanks Bowman.
i was brased...you can solder it with a 95/5 solder but you will need a good 1/4" of slip fitt to be sure it will hold.
that larger piece i am thinking is a small accumlating bulb of some type.
there is only one drier on those systems.at the condensor.

you will have to install charge ports one at the top condensor line and the other at the unconnected tube at back of the compressor.

take your time you get this thing working great