Non Micron D9 hitting near 700mhz!!!

[ineedaname]

I got some kingston value ram today on a p5n-e SLi. 1gb stick $100 pc2-5300. I'm running them at 900mhz 4-4-4-12 at 2.1v That is some sweet stuff for $100 Canadian dollars.

I can't tell what IC's they use tho cuz it just says kingston all over them.

[ziddey]

nice results. they were kvr667's eh? I have two sticks as well (albeit 512mb sticks single sided) and they'll do 800 5-4-4-12 @ 2.15v, but not really any higher. try to do 900 with 6-6-6 and 2.1-2.4v and it's no post. try 800 4-4-4 with higher volts and no stability.

[ineedaname]

got an update on my progress with this kingston here

[rapty]

I have quite alot Kits of Kingston PC5300 not sure what IC they are but I had 958mhz out of them with the last setup

Any Ideas on the IC's?

[Rone]

I have quite alot Kits of Kingston PC5300 not sure what IC they are but I had 958mhz out of them with the last setup

Any Ideas on the IC's?

Could you post some pictures of the modules and close-ups of the ICs?
Do they look like any of the ICs on this page?

[BryaN.sG]

I've got this on my kingston VR 5300 1GB and i managed 990mhz 5-5-5 @ 2.25v.

[ziddey]

hmm, I've got the same looking ic, but mine says:

s80206
0703 s01
d640btebggl3r
http://www.xtremesystems.org/forums/...d.php?t=134177

Mine is performing not too well. It won't even post at 900mhz 5-5-5 or 6-6-6 with 2.15v, 2.25v, 2.45v.

It passed memtest for 1 iteration at 800 5-5-5-15 2.15v, and longer in the windows port (not sure how reliable that one is). But both nights so far when I've tried to run large fft and 3dm03 in loop, by the time i wake up, the thing machine check errored, which I'd imagine is ram. So it's back to more ram checking I guess.


edit: comparing the pictures, it looks like it might be the infineon af-3s. Cross checking with the ddr2 list, it looks like kingston is using af-3s on the hyper-x 6400 line. hmm

[mach82]

I've got this on my kingston VR 5300 1GB and i managed 990mhz 5-5-5 @ 2.25v.

syncmax

[ziddey]

http://www.pcstats.com/ArtVNL.cfm?articleid=1973&page=2 for pic of syncmax

looks like the dot is indented in?

edit: haha you edited from syncmax for sure to syncmax? :p

[Rone]

syncmax

SyncMax is not a chipmanufacturer. It's part of the Concord Idea Corporation.
They produce memorymodules and only use Elpida ICs.

http://www.pcstats.com/ArtVNL.cfm?articleid=1973&page=2 for pic of syncmax

looks like the dot is indented in?

That is a picture of an Elpida IC.

I've got this on my kingston VR 5300 1GB and i managed 990mhz 5-5-5 @ 2.25v.

http://img168.imageshack.us/img168/6...allkingcx1.jpg

That's probably Powerchip.

[ineedaname]

Here's the pic of my IC also on kingston VR 5300 1gb.



I got 980mhz 4-4-4-12 at 2.3v I can probably go a bit higher if a relax the timings to 5.

[xlink]

is it just me, or am I the only one used to considering hynix with lowend OEM PCs intended for grandma?

[msimax]

this was the d9 i mentioned @$27 each gona look for another set for 2 gig total that @5-5-4-11

[dinos22]

i'm getting 4xsticks of same kind in a couple of days

[msimax]

no more info on these chips

[NinjaZX6R]

no more info on these chips

I can't even find a place that sells these still. Any word on them or a 2gb set???

-Collin-

[zert]

if you're european komplett sell 1gb Twister PC6400 sticks.

[Hazzan]

Still non Micron Chipset !! TWINMOSS TWISTER PC 6800 512 x 2 ( Hynix FP S - 5 ) on ABIT AB9 QUAD GT :

4-4-4-12 Voltage : 2,2volt



4-4-4-12 Voltage : 2,3volt

[NinjaZX6R]

Hazzan...where did you get them? Nice results.

What's the max mem speed you can get on your quad GT? I can't seem to get anything past around 530mhz or so.

-Collin-

[Hazzan]

@NinjaZX6R : Store in my city Yogjakarta Indonesia, maybe next I can post with high result now still on Progress

[ahmad]

Salam. Very very nice! I will try to find some here