Brisbane 4000+ box shot and CPU IHS shot.

[alucasa]

Finally, my Brisbane 4000+ arrived.
And the best close shot I've ever made with that cpu photo.

[granulf]

0701 . You'll have to oc this baby, we don't care if it's noisy

[alucasa]

New heatsinks as well.

The two Ninja are for my quad FX and the ... small one is for Brisbane 4000+... as the Brisbane is going into 2U... but I could temporarily use Ninja on Brisbane...

[granulf]

but I could temporarily use Ninja on Brisbane...

[Sparky]

... but I could temporarily use Ninja on Brisbane...

DO IT DO IT!!

[alucasa]

Well, I will see what I can do. Need to find some RAM first... Don't have good one left to spare though. Good ones just went into Merom rig.

[alucasa]

That doesn't look right.

Anyway, the only spare ram I have is an OCZ value 512 ram stick.

[theoddone]

Wow that one is different from the one I got today. I got the classic "assembled in malaysia". My 4000 X2 stepping is CAAFG 0653UPBW. Gotto wait for ram and mobo before overclocking.

[alucasa]

Booting successful.

Will need to install xp64 first before anything.

[nn_step]

less talkie, more overclockie

[alucasa]

Bah, installing OS now.

For quickie, it hit 2800 real easy in BIOS though.

[alucasa]

There you go. I will try to push a bit higher.
Do you want a cpu-z validation link though?
Getting it hooked on net can be ... a little tricky. I will have to make a wire long enough that will reach my router.

[Inteleron]

The brisbanes are looking liek awsome clockers. I predict 3.2GHz for the 4000+ considering Iv seen 3600's already hit 3.0GHz.

*EDIT* Up some voltages alucasa. you can do it :P
*EDIT #2* Fellow Torontonian, where did you pickup that cpu? was it locally?

[Rickster_64]

It looks to be better clocking afterall than 90nm. 2700-2800 was all I ever got from 8 X2's before. Congrats. Lets see it with 1.55V and hope for 3.2-3.3.

[alucasa]

Very unstable at this point.

But here.

[GMX]

HT link 1475?

[bzo]

you may want to reduce your HTT multiplier. You're running at a high and likely unstable HTT speed.

[alucasa]

Is the voltage on CPUZ right? 1.52V?

Yep.

[generics_user]

drop the HT multi , use something different than coretemp (16/17° are too low )

[alucasa]

My ram is a cheap 512 ram (Value ram and I bought it when it was in clearance sale). I was unable to do better timings on RAM.

[SOLDNER-MOFO64]

Pardon? better timings? Just use a 180mhz/166mhz memory divider, drop your HTx to 3 and lets see what the cpu maxes at

[alucasa]

By the way, the CPU does seem to run much cooler. I changed the cooler to the silverstone one and it will runs at 16c, not to mention the cpu heatsink is cold to touch.

[alucasa]

Pardon? better timings? Just use a 180mhz/166mhz memory divider, drop your HTx to 3 and lets see what the cpu maxes at

I was trying to get a better SuperPI socre. 32 seconds on 1M wasn't very impressive.

[ColdWinter]

This is making me somewhat sad and jealous that I can't get any brisbanes in Switzerland

[alucasa]

This was done on stock cooler. Silverstone heatsink couldn't fit in the 2U.

http://valid.x86-secret.com/show_oc?id=165626

It's the stable one.