103% Overclock E4300 on AIR

[V0rt3x]

very nice result.
have you tried a little bit higher just for a screenshot?

[T07N]

WOW! These things are better than the E6300.

[Rickster_64]

I would say 1.5-1.525 with high clocks and a high end air cooler are just fine. Anymore than that and under 100% load things probably start to get a little borderline. My setup is using a stock intel HSF haha. Just swapped the pad for some AS5 and away I went.

[DazzXP]

Well they say don't use more then 0.3 volts over defualt when using air cooling.

[rithina]

what stepping is that btw?

great OC u have there

[Evilsizer]

what stepping is that btw?

great OC u have there

all allendale cores are L2 stepping just watch the E63/64 will be the same stepping soon.

@op
can you post the Batch numbers from the box?

i got a oem E4300 week 41 poor ocer 2.8ghz on stock-v with Ninja hs. only see 35c load in TAT on both cores with dual 32m runs. here is where what i can get with this cpu..


bios voltage 1.45, uguru 1.44v
max oc=3ghz

bios voltage 1.525, uguru 1.50-1.51
max oc=3.15ghz

bios voltage 1.625, uguru 1.6-1.61
max oc 3.3ghz

to get 3.4ghz stable i need to use alot more cpu-v prolly around 1.68-1.725v actuall. this board droops about .03v underload.

[Pillo-kun]

all allendale cores are L2 stepping just watch the E63/64 will be the same stepping soon.

@op
can you post the Batch numbers from the box?

i got a oem E4300 week 41 poor ocer 2.8ghz on stock-v with Ninja hs. only see 35c load in TAT on both cores with dual 32m runs. here is where what i can get with this cpu..


bios voltage 1.45, uguru 1.44v
max oc=3ghz

bios voltage 1.525, uguru 1.50-1.51
max oc=3.15ghz

bios voltage 1.625, uguru 1.6-1.61
max oc 3.3ghz

to get 3.4ghz stable i need to use alot more cpu-v prolly around 1.68-1.725v actuall. this board droops about .03v underload.

Your cpu behaves just similar to mine. it looks like it si just a tad better cus it can handle 3ghz at stock but. It needs great voltage to pass over 3.2ghz and it strangly dont want more than 400 mhz fsb.

At 1.66 i can get to 3.6 but the temp at load can get to 80c. Maybe im better of selling it and getting an e6600 as my friend has one and it did 3.6 with ease

[ZoLKoRn]

Update for E4300 from me again... i obtain the old 's E4300 on new mobo with GIGABYTE DS3 and other component of economize system, for price in thailand , E4300 ~ $175 , GIGABYTE DS3 ~ $136 , A-DATA DDR-II PC4300 512*2 ~ $74 and HIS Hightech H165PRQT256GDDN-R ~ $145 .

For on DS3 mobo i can get max FSB is 390MHz only, if over than 390Mhz will not boot.

result...
E4300@3.510GHz ( 390x9 ) Vcore- 1.570V
Intel Stock cooler
GIGABYTE DS3 rev.1 ( non Mod )
A-DATA PC4300@760MHz CL 4-4-4-8 Vmem 2.3V
HIS X1650Pro IceQ Turbo @681/724MHz


Test on Stock Cooler and room temp 27.2*C








Burn by orthos 8hr pass and 67-71*C max cpu temp by Stock cooler

[sparkY1000]

Thats a very nice result! Looks like this E4300 is stronger than many others

[IAmATeaf]

That is sweet, have been holding back for the newer 6350, 6450 C2D CPUs but these overclocks makes the 4300 seriously tempting

[The Nemesis]

Nice OC my e4300 can't touch it

[Tonucci]

to Nuevototem, for high Bus Speed it's can boot up on bios setup, is 425MHz and multi = 8, but other multiplier 6,7 not boot

Maybe its because of this:

http://www.thetechrepository.com/sho...hp?p=32#post32

By their theory lowering the multi = overclock the North Bridge Core.

[ZoLKoRn]

Maybe its because of this:

http://www.thetechrepository.com/sho...hp?p=32#post32

By their theory lowering the multi = overclock the North Bridge Core.

Hi Tonucci, Thank a lot for you answer

[jozzy]

ah nice proc.. wish can borrow it

[SoF]

another small chip with muscles - nice oc

[jozzy]

@ Zolkorn : have you tried orthos for stability @ 100% oc'ed ?

[ZoLKoRn]

@ Zolkorn : have you tried orthos for stability @ 100% oc'ed ?

with 100% overclock just stability orthos on ASUS P5B Deluxe, and i'll show it on last time. because now i'm busy

[jozzy]

the same batch like Zolkorn



http://valid.x86-secret.com/show_oc?id=166810

Cooling : Scythe Infinity + fancy 12cm TT's fan blue led *inside my Silver Armor of course*


update : http://valid.x86-secret.com/show_oc?id=166943 115%

[da_h00k]

Nice!

[ZoLKoRn]

the same batch like Zolkorn

Nice...jozzy

[BAMBI]

Some great bang for the buck, looks like a good upgrade path.

[jozzy]

Nice...jozzy

thx to you bro

[Musslan]

Nice o/c guys.
I wounder what the difference between your cpus and mine
Mine is a 36week cpu.
Cant go over 2.9ghz

Is there any special settings that I have forgotten beside the ordinary voltage settings and other function disabled?

Simon

[Hazzan]

@jozzy : Cool Cool

[jozzy]

@jozzy : Cool Cool

just lucky i guess