Commando meet E6400 on mini-cascade @ 4.400Mhz

[Pedro Rocha]

I'm doing a mini-review of the Asus Commando, by curiosity I decid to mount it on the Mini-Cascde with a retail E6400.

Motherboard is unmod, put 1.80v (1.85 undervolts to 1.77v) here is the bio screen:




Well, first attempt : 106% superpi benchable



May the CPU will go higger, I think the limit is the memory (using the unexpensive Team Group PC2-5300) I will try with the Corsairs C3 later

I don't know if it is a WR - anyway here it is a CPU-z validation at 4.400 Mhz




Next I will test the motherbaord with QX6700 - let's see how far can it go

[steelballzz]

I don't know if it is a WR - anyway here it is a CPU-z validation at 4.400 Mhz

No, it isn't

(probably this one: http://img407.imageshack.us/img407/1...0wrcopytl8.jpg)

[runmc]

Pedro - do you like the Commando? Would you recommend the motherboard to a friend?

[Pedro Rocha]

Pedro - do you like the Commando? Would you recommend the motherboard to a friend?

Hi Rom - Iit's to soon to have a firm conclusion, using it just for a few hours - but the motherboard have a lot of potential

Let's see how it goes with quad-cores ..

[curvie]

Hi Rom - Iit's to soon to have a firm conclusion, using it just for a few hours - but the motherboard have a lot of potential

Let's see how it goes with quad-cores ..

Looking forward to your findings

[t800]

What kind temps minicascades holds on load(evap)? superpi/prime?

[Rol-Co]

I'm doing a mini-review of the Asus Commando, by curiosity I decid to mount it on the Mini-Cascde with a retail E6400.

Motherboard is unmod, put 1.80v (1.85 undervolts to 1.77v) here is the bio screen:


May the CPU will go higger, I think the limit is the memory (using the unexpensive Team Group PC2-5300) I will try with the Corsairs C3 later



Next I will test the motherbaord with QX6700 - let's see how far can it go

sorry m8 but its the board

E6600
Multi 9 http://valid.x86-secret.com/show_oc.php?id=156915
Multi 8 http://valid.x86-secret.com/show_oc.php?id=157281
Multi 6 http://valid.x86-secret.com/show_oc.php?id=157278

watercooled and Ln2 too

[Phosphate]

I'm not an expert on the p5b deluxe but it seems verey very similiar to the commando. So besides Solid caps what other special goodies does Commando bring (that are not seen in p5b delux)

[Kunaak]

even my E6400 on a single stage did 4.667 ghz, and was stable at 4.4 ghz, for 3dmark and such, and topped out at 4.48 ghz for 1M and such.

you can get alot more from a E6400 and cascade.

http://www.xtremesystems.org/forums/...d.php?t=124251

[bachus_anonym]

Niiice, Pedro! I hope your chip has more FSB leg room left in there.... What do you think? Have you tried to push it further yet?

[anarinsk]

Nice! Nice!

[Barracuda]

very nice pedro . ca you post a mini cascade photo ?

[Pedro Rocha]

Niiice, Pedro! I hope your chip has more FSB leg room left in there.... What do you think? Have you tried to push it further yet?

The FSB limit is in the motherboard - around 550Mhz - like Rol-Co state above.

Already tested with X6800 with the same result - stop at 550Mhz..

[Pedro Rocha]

very nice pedro . ca you post a mini cascade photo ?

[Barracuda]

thank you pedro