PCMark04 fix for Conroe: post if interested

[SF3D]

Sorry to bring this old thread back, but I don't know how to do this:

I set:
CPU 0+1 (1 minute)
CPU 0 (1 minute)
CPU 0+1

I have send few personal messages, but nobody answer
So, can someone explain this. I have downloaded "Get n Set Affinity", but there is no way to adjust affinity start time.

"set affinity by time" Is this same program or some other?

[Boble76]

I would like to make & try this "fix" too, but I can't because I don't know htf to it...plz. SUOMEKSI MTZKI ?

[ryant]

same here send me a pm or somthing with instruction

[ferds]

thanks for the fix K404 and Ed Wilk.. it works for me

[dinos22]

PM`d

WTF no PM man we want to know as well

[K404]

heh heh sorry Dinos

ok...some guys get this working fine, some dont.

I know now that Ed put an updated version of the software on his FTP. I was thinking that it was a bad version coz of the problems iv been asked to help with, but if ferds has just downloaded it and tried...obviously not.

There are windows services that need to be kept enabled for it to work...i`ll dig out my notes and edit this post with it.

I`ll be honest..I dont know why some ppl cant get this to work. Windows updates? SP2? a different windows build if those exist...I really dont know, i`m sorry if some ppl are disappointed or ****** at me coz I cant offer the magical solution but I just had the idea and learned to use the resulting software like everyone else.

[dicecca112]

I could get it work, but only if I locked PCmark04 to a single core, and everything else to the other core.

[BenchZowner]

You can try the following:

Hiding all processes ( @ set affinity utility ) except PCMark04.exe
Open up PC Mark04 and position the PC Mark04 main window on the right side ( lets say :P ) of your desktop.
Position the get&set affinity utility on the left side of your desktop ( so you can see it & use it while PC Mark04 is running ).

Set affinity to both cores and press Set ( or apply, don't remember the application button names :P ).
Then click again on PCMark04.exe & tick the Core 0 radio button ( but don't press set affinity ).
Press the Run/Benchmark button of PC Mark04.

During the second PCMark04 test get ready to press the Set button @ get&set affinity utility instantly when PCMark04 is deinitializing the 2nd test.
Let the 3rd test finish, then when PCMark04 is deinitializing the test, quickly click on PCMark04.exe @ get&set utility.
Let the test run, and when PCMark04 is deinitializing the test click on the Core 0+1 radio button @ get&set utility.
When the next test is deinitializing click the Set affinity button @ get&Set affinity utility.

Will it work ?
Depends on your timing.
Try it 3-5 times, you'll make it

[WeldZilla]

Thanks to Ed Wilk for the code and a thanks to Kenny for the thread.
I would say just download the "set affinity by time" run it set the number2 =
(0+1) for 1 minute then set the 0 cpu for the next minute then set it back to (0+1) 1 minute after that when the first one you set Kicks in give it 16 seconds then start the test. If at the end of the test you get now score you are either oc'd to far or you vid card is! My vid card was clocked to high on the gpu the first time I ran it. I backed it down a bit and got a score.

Remember open PCMark04 first. So the program will see it.

Then set your affinity by time next like this. Here is a pic of what it all should look like

You will notice in the pic that the Affinity program is set to start at 6:05
So at 6:05:16 hit "Run PCMARK"
Now sometimes when it is done with the web page rendering section of the test you will get a crash post. Just ignore it and let the tests finish and if you are not too far OC'd you should get a score.
Like this....

http://service.futuremark.com/compare?pcm04=3308480

Good luck and give it a shot!!

[K404]

You can try the following:

Hiding all processes ( @ set affinity utility ) except PCMark04.exe
Open up PC Mark04 and position the PC Mark04 main window on the right side ( lets say :P ) of your desktop.
Position the get&set affinity utility on the left side of your desktop ( so you can see it & use it while PC Mark04 is running ).

Set affinity to both cores and press Set ( or apply, don't remember the application button names :P ).
Then click again on PCMark04.exe & tick the Core 0 radio button ( but don't press set affinity ).
Press the Run/Benchmark button of PC Mark04.

During the second PCMark04 test get ready to press the Set button @ get&set affinity utility instantly when PCMark04 is deinitializing the 2nd test.
Let the 3rd test finish, then when PCMark04 is deinitializing the test, quickly click on PCMark04.exe @ get&set utility.
Let the test run, and when PCMark04 is deinitializing the test click on the Core 0+1 radio button @ get&set utility.
When the next test is deinitializing click the Set affinity button @ get&Set affinity utility.

Will it work ?
Depends on your timing.
Try it 3-5 times, you'll make it

Does that work? From past experiences, if I click on another window when PCM is running, it`ll abort the bench at the end of whatever test its on?

[WeldZilla]

how about the link to your results benchzone. I can't find you at or near the top of the orb. You will find my results on the first page. From my experince clicking anything will cause the bench to lose focus, and it will fail.
So bring it with the pics and the link to your score. I know the way I did it works and I posted my results to prove it.

WZ

[BenchZowner]

Here's one:
http://service.futuremark.com/compare?pcm04=3304816

I can give you a video if you want

Sorry for the delayed response.

[dinos22]

Here's one:
http://service.futuremark.com/compare?pcm04=3304816

I can give you a video if you want

Sorry for the delayed response.

sure

[BenchZowner]

will do in 5-10 minutes

[BenchZowner]

grab it

Download the Video ( WMV, Windows Media 9 Format, 1,74MB )

Sorry for the video quality, I don't have my camera here

[eva2000]

Anyone know how to get this to work with Q6600 Kentsfield quad core cpus ?

[K404]

Think you`ll have to ask the original coder to do another version

Are any of the tests in PCM04 gonna be able to use it? From memory they only seem to have 2 threads max?

[DJSUB]

i already followed the instructions but i still have error.

here's the screenshots:
this is the error from the last test.



and here's the error in my result in ORB



i think it's encoder related. i already installed media player 10.
does the windows media encoder 9 included in windows media player installer?
or i have to get wmv encoder separately?

tnx in advance

[K404]

The encoder comes seperately

[DJSUB]

do u have anylink for the encoder?

tnx m8

[caintry_boy]

Sorry to bring this old thread back, but I don't know how to do this:

I set:
CPU 0+1 (1 minute)
CPU 0 (1 minute)
CPU 0+1

I have send few personal messages, but nobody answer
So, can someone explain this. I have downloaded "Get n Set Affinity", but there is no way to adjust affinity start time.

"set affinity by time" Is this same program or some other?

Open PCMark 04.
Open Set Affinity By Time.
Select PCMark 04 in the drop down menu (upper left corner)
Look at the running clock and decide what time you want to start PCMark 04, set the "Selected Time" clock to that time.
Select *CPU 2* (0+1) and hit "Add"
Select *CPU 0* and add 1 minute to the "Selected Time", hit "Add".
Select *CPU 2* again and add another minute to the "Selected Time", hit "Add".
The idea is to set it up like 5 min. before you want to start PCMark 04
When the "running clock" hits the time you want to start, wait about 15-17 seconds and start PCMark 04.

Just discovered this and it works great for me!!! Thanks K404!!!

[massman]

I really can't get it working ...

[Quentin]

Massman show me a full screen of your desktop

May be I have the solution

[massman]

How can that help ? :p

click

[Quentin]

Héhé

I think is the time

I passed 3 hour for find this stupid solution

Try :