P5B Deluxe Vmods

[OnDborder]

Lol, you haven't seen me solder.
I'll probably just leave it. It's nice and stable. No fluctations.

[ManagHead]

Anyone know if there's possible to use 10kvr for the vMCH mod?

[newls1]

Why am I still not understanding how to do this pencil mod? Am I retarded? I cant see where to do it. Can someone please help me.

[OnDborder]

Here's a close-up. http://www.xtremesystems.org/forums/...15&postcount=5
Here's another, further away. http://www.xtremesystems.org/forums/...2&postcount=26
You "pencil" in between the 2 ends of that tiny resistor. The lead conducts the current past the resistor.

[Quest For Speed]

Just completed the Vmods and they all work great. I found that roughly 20k will raise vcore by .6v so the mod can be done with a 20k vr. Just be sure to set your vcore in bios down by at least .5~.6 below where you usually run at.

[Quest For Speed]

Anyone know if there's possible to use 10kvr for the vMCH mod?

Yes you can. It will raise the voltage roughly .5~.6 so 1.45 bios at 10k will give you roughly 1.5

[ManagHead]

Yes you can. It will raise the voltage roughly .5~.6 so 1.45 bios at 10k will give you roughly 1.5

Do you mean it will raise 0.05? If I have 1,45V in Bios, and it raises 0.5V, it will become 1,95V?

[Quest For Speed]

Do you mean it will raise 0.05? If I have 1,45V in Bios, and it raises 0.5V, it will become 1,95V?

Sorry, I meant .05. I currently have my VR set at 10k and bios set to 1.55 and my multimeter is reading 1.606.

[prosk8]

same as p5wdh and ws pro

??? if p5b de=p5b dh de=p5b=p5wdh=all ws pro
hmm i can do the all mods of all mobos in p5w64 ws pro or some mobo else?


sorry for the english

[Spacemaster]

Is there eny program to see mem voltages after Vmem mod, or I must do it vith my bear hands and votmeter

[jimmyz]

asus ai suite it is on the cd but there is a new one (less than a week old) on the website.

[giovysax]

any southbridge vcore mod????

My limit is sb vcore...

Help me plz!!!

[zhangmaster12]

soooo anybody wanna do the vcore and vdroop for me?

[T07N]

i can do it for a price. pm me.

[K404]

Zhangmaster..where are you based?

T07N..I`ll do your avatar for free

[karateo]

Here's a close-up. http://www.xtremesystems.org/forums/...15&postcount=5
Here's another, further away. http://www.xtremesystems.org/forums/...2&postcount=26
You "pencil" in between the 2 ends of that tiny resistor. The lead conducts the current past the resistor.

does this pencil mod voids the warranty?
i mean if something happens i can erase the pencil so nobody can see it!

after all vdroop makes the motherboard more stable

[jVIDIA]

does this pencil mod voids the warranty?
i mean if something happens i can erase the pencil so nobody can see it!

after all vdroop makes the motherboard more stable

You can erase it easily with a pencil rubber

[karateo]

thanks

[|-jokker-|]

So for 1000% shure the mods are the same for the p5b-e ??

[jVIDIA]

So for 1000% shure the mods are the same for the p5b-e ??

I'm not sure my friend
But it must be. I think.

[zhangmaster12]

what type of pencil do i use for hicookie's vdroop mod on the 1st page?

[ManagHead]

Anyone has the vSB mod?

zhangmaster12: something with low resistance.

[sniperxxx90]

How many Ohms would be 100% neutralizing the vDroop, but not anything extra?

[Revage]

does asus p5b-e plus have same mods like p5b deluxe ?

[zhangmaster12]

so a number two pencil will work?

and this mod workd on all p5b deluxes right?

i gotta be causous, dont wanna waste 150$

screw it, im gonna solder it. can i use this VR?
http://www.alliedelec.com/Search/Sea...C0&Ntk=Primary

why does it have three leg things?