My 1st impressions

First : Tuniq Tower fits perfeclty ..nice




Here is a quick result with a retail E6400 cooled by air / Tuniq



That was just with 1.65 on NB Vcore

VDroop does not sees to be a problem with retail motherboard

v_offset = v_bios - v_idle = 1.625v - 1.585v

v_drop = v_idle - v_load = 1.60v - 1.575v


But seems there is problem, after put a 120 fan on the top of NB / mems I raise the NB VCore to 1.900v (maximum in bios is 2.025v) a now the motherboard does not anymore - in LCD does not pass "CPU INIT"

I alredy clear CMOS, even remove the batery and the still not bot (turns on and off) - anyone experience the same problem ??

For now I advise you all not to pass 1.75v on NB voltage ..