2000W power supplies appear (OCZ)

[RyderOCZ]

The OCZ PSU is designed for the serious bencher (Dry Ice, LN2, phase on the Vid Cards) in mind. This is not something the everyday user with SLI is going to need.

This unit will not fit inside your case, it is designed to sit on top of the case or alongside your open bench rig.

First is the front of the PSU, note there will be some additions here on the finished unit. LCD Display showing multiple pieces of information about what is going on with the PSU. As you can see the Pots are right on the front of the unit to adjust your voltages.

Second picture is the back of the unit showing the attachment of the "breakout" box to the main PSU unit. The "Breakout box" is multi purpose in design. If you are benching on an "open air" rig, it will sit on the table and allow you to use only the leads necessary. If you have a system mounted in a case, you can mount it in a case where the PSU normally goes (standard ATX mounting holes) and then attach the leads required for your system to function.

Final pic is of the complete unit with cables attached.

Pics available here: http://www.bleedinedge.com/forum/sho...739#post210739