MMM
Page 1 of 2 12 LastLast
Results 1 to 25 of 28

Thread: New Bios Mod DFI Expert

  1. 07-11-2006, 03:29 AM #1
    by -=Merlin=-
    by -=Merlin=- is offline
    Registered User
    Join Date
    Jul 2004
    Location
    by -=Merlin=-
    Posts
    62
    Send a message via ICQ to by -=Merlin=-

    New Bios Mod DFI Expert

    New Bios DFI Expert 10.07.06

    !!! USE AT YOUR OWN RISK !!!
    !!! USE AT YOUR OWN RISK !!!

    Testet BIOS Savior

    Expert 10.07.06 rar

    Expert 10.07.06 zip

    !!! USE AT YOUR OWN RISK !!!
    !!! USE AT YOUR OWN RISK !!!

    Merlin
    Reply With Quote Reply With Quote
  2. 07-11-2006, 03:33 AM #2
    dinos22
    dinos22 is offline
    Xtreme Legend
    Join Date
    Mar 2005
    Location
    Australia
    Posts
    17,242
    what can one expect from this one ............have you got any more info
    Last edited by dinos22; 07-11-2006 at 06:52 AM.
    Team.AU
    Got tube?
    GIGABYTE Australia
    Need a GIGABYTE bios or support?

    Reply With Quote Reply With Quote
  3. 07-11-2006, 06:36 AM #3
    DeNs
    DeNs is offline
    Xtreme Member
    Join Date
    Jan 2005
    Location
    Melb, Australia.
    Posts
    166
    Quote Originally Posted by dinos22
    what can one expect from this more ............have you got any more info
    Seconded. Would like to know what i'd gain before I update. Anything like increased compatibility with certain types of ram is always nice, provided it's the ram i'm running

    Thanks,

    ---dens


    Current Testing Setup: || deNs Custom Single Stage Unit | E2160 @ 3.7GHz 1.58v | Kingston ValueRAM 2GB PC6400 @ 4-5-4-12 1000MHz 2.2v | Gigabyte P35-DS3R rev2.1 w/ vDroop Mod ||
    Reply With Quote Reply With Quote
  4. 07-11-2006, 08:23 AM #4
    by -=Merlin=-
    by -=Merlin=- is offline
    Registered User
    Join Date
    Jul 2004
    Location
    by -=Merlin=-
    Posts
    62
    Send a message via ICQ to by -=Merlin=-
    test bios Expert 10.07.06
    ocz tccd rev 1.0


    Reply With Quote Reply With Quote
  5. 07-11-2006, 08:38 AM #5
    wtkprol
    wtkprol is offline
    Xtreme Member
    Join Date
    Mar 2006
    Location
    Cola, SC
    Posts
    309
    Ok, what were your results with the previous bios?
    Reply With Quote Reply With Quote
  6. 07-11-2006, 08:50 AM #6
    Qkjhfhaiguihfma
    Qkjhfhaiguihfma is offline
    Xtreme Member
    Join Date
    Sep 2002
    Posts
    445
    is this for the expert only?
    Quote Originally Posted by Ket
    Erm, its a little weird how a lot of peeps dont have a case for their PC.....essentially thats a cheat because in a case things always run hotter, yet ppl will claim their OC "stable"

    Sorry, in my book nothing is valid unless its in a case, and hence, a "normal" environment, by all means go nuts on cooling not a problem, but an open top setup with an OC ppl claim to be stable when in all reality inside a PC it probably won't be? Thats just unacceptable to me.
    Reply With Quote Reply With Quote
  7. 07-11-2006, 08:57 AM #7
    billdavis
    billdavis is offline
    Xtreme Addict
    Join Date
    May 2006
    Location
    Colorado Springs
    Posts
    1,173
    Send a message via Yahoo to billdavis
    so... i dont want to be a guinea pig

    Merlin what are the differences
    ________
    California mdecial marijuana dispensaries
    Last edited by billdavis; 03-08-2011 at 07:12 PM.
    Reply With Quote Reply With Quote
  8. 07-11-2006, 12:10 PM #8
    Draxx
    Draxx is offline
    Xtreme Member
    Join Date
    Mar 2004
    Location
    UK
    Posts
    315
    What BIOS is it based on?
    ASUS P5K-E/WIFI-AP, Q6600 @ 3.4GHz 1.3v, Tuniq Tower 120, 4Gb OCZ PC2 8500 Reaper HPC, Asus HD5870, 320Gb Seagate 7200.10 SATAII, 500Gb Sammy F1, NEC ND4550A DVD burner, Corsair TX 750w PSU, Antec P182.
    Reply With Quote Reply With Quote
  9. 07-11-2006, 12:31 PM #9
    Timmay
    Timmay is offline
    Xtreme Member
    Join Date
    Apr 2006
    Location
    Taupo
    Posts
    493
    He posted the same thing over at DFI Street... with NO info either...
    Intel i5 2500k @ 4GHz || Gigabyte Z68 UD3 || Vengeance 8GB 8-8-8-24 1T || CM Stacker 810
    ATI 4850 || Samsung Spinpoint F3 x 2 || SilverStone ST60F
    Asus DVD RW +- || Logitech G15 || MS Intel-eye 1.1|| CMV 19" Wide-Screen || Scythe Ninja
    Reply With Quote Reply With Quote
  10. 07-12-2006, 06:15 AM #10
    dinos22
    dinos22 is offline
    Xtreme Legend
    Join Date
    Mar 2005
    Location
    Australia
    Posts
    17,242
    well i don't know about NO info..................did you not see the tccd screenshot at 300MHz 2.5-3-3-x 1T >> THAT's pretty significant and would be interesting to hear a comment on how much of an improvement was made over DFI bioses........
    Team.AU
    Got tube?
    GIGABYTE Australia
    Need a GIGABYTE bios or support?

    Reply With Quote Reply With Quote
  11. 07-12-2006, 07:32 AM #11
    hipogtr
    hipogtr is offline
    Xtreme Member
    Join Date
    Nov 2003
    Posts
    118
    Thanks for posting the bios and results. Interesting stuff.
    Reply With Quote Reply With Quote
  12. 07-14-2006, 11:35 AM #12
    by -=Merlin=-
    by -=Merlin=- is offline
    Registered User
    Join Date
    Jul 2004
    Location
    by -=Merlin=-
    Posts
    62
    Send a message via ICQ to by -=Merlin=-
    updat: bios 10.07.06

    I find very good worth!



    Merlin
    Reply With Quote Reply With Quote
  13. 01-09-2007, 02:08 PM #13
    Brother Esau
    Brother Esau is offline
    D.F.I Pimp Daddy
    Join Date
    Jan 2007
    Location
    Still Lost At The Dead Show Parking Lot
    Posts
    5,182
    Merlin makes a awesome bios but does not give Americans any info on whats what but if you look in google you'll find that he does share detailed info on the DELUX Forums but it needs to translated! This bios really excells at 200:1:1 but you get no love from the 183 -166 divider
    Reply With Quote Reply With Quote
  14. 01-09-2007, 02:55 PM #14
    Sonic9
    Sonic9 is offline
    Registered User
    Join Date
    Nov 2004
    Posts
    58
    Can be ported to Ultra-D ?
    Asus P5E@Rampage / Q9550 c1 @460x8.5@1,320v / Noctua NH-U12P / 2Gb x 2 OCZ Flex PC-9200@1105Mhz / Radeon4850 / OdinGT 550w
    past
    DFI nF4 Ultra / Opty170 CCBBE 0617 FPMW @ 2,7Ghz / XP-90 / 2x1Gb CellShock PC4000 / GF 7800GT / Enermax 460W
    Reply With Quote Reply With Quote
  15. 01-09-2007, 02:57 PM #15
    dinos22
    dinos22 is offline
    Xtreme Legend
    Join Date
    Mar 2005
    Location
    Australia
    Posts
    17,242
    Quote Originally Posted by Brother Esau
    Merlin makes a awesome bios but does not give Americans any info on whats what but if you look in google you'll find that he does share detailed info on the DELUX Forums but it needs to translated! This bios really excells at 200:1:1 but you get no love from the 183 -166 divider
    HOLY THREAD DIGGER BATMAN!!!
    Team.AU
    Got tube?
    GIGABYTE Australia
    Need a GIGABYTE bios or support?

    Reply With Quote Reply With Quote
  16. 01-10-2007, 12:07 AM #16
    Brother Esau
    Brother Esau is offline
    D.F.I Pimp Daddy
    Join Date
    Jan 2007
    Location
    Still Lost At The Dead Show Parking Lot
    Posts
    5,182
    Hey I use the bios and its awesome just not so much on dividers is all but here this is what Merlins bios do with these Redlines for 8hrs of Prime and H.C.I Memtest and I could get a hell of allot more on 200:1:1 but I dont want to fubar the ram seeing how supplys are almost non existant .
    My chip has been up to 2980mhz on 166 divider but cant seem to get much more love on the divider though


    [b]Genie BIOS Settings
    [color=red]
    FSB Bus Frequency............................. - 275
    LDT/FSB Frequency Ratio....................... - x3
    CPU/FSB Frequency Ratio....................... - 10
    PCI eXpress Frequency......................... - 105Mhz

    CPU VID StartUp Value......................... - Start up

    CPU VID Control............................... - 1.375
    CPU VID Special Control....................... - auto
    LDT Voltage Control........................... - 1.20v
    Chip Set Voltage Control...................... - 1.52
    DRAM Voltage Control.......................... - 2.64v
    DRAM Configuration Settings:
    [color=red]
    DRAM Frequency Set............................ - 200:1:1
    Command Per Clock (CPC)....................... - Enable
    CAS Latency Control (Tcl)..................... - 3
    RAS# to CAS# delay (Trcd)..................... - 3
    Min RAS# active time (Tras)................... - 8
    Row precharge time (Trp)...................... - 2
    Row Cycle time (Trc).......................... - 7 Bus Clocks
    Row refresh cyc time (Trfc)................... - 15 Bus Clocks
    Row to Row delay (Trrd)....................... - 02 Bus Clocks
    Write recovery time (Twr)..................... - 02 Bus Clocks
    Write to Read delay (Twtr).................... - 01 Bus Clocks
    Read to Write delay (Trwt).................... - 03 Bus Clocks
    Refresh Period (Tref)......................... - 4708 Cycles
    DRAM Bank Interleave.......................... - Enabled

    DQS Skew Control.............................. - Auto
    DQS Skew Value................................ - 0
    DRAM Drive Strength........................... - 8
    DRAM Data Drive Strength...................... - 2
    Max Async Latency............................. - 7
    DRAM Response Time............................ - normal
    Read Preamble Time............................ - 5.5
    IdleCycle Limit............................... - 16 Cycles
    Dynamic Counter............................... - Enable
    R/W Queue Bypass.............................. - 16 x
    Bypass Max.................................... - 07 x
    32 Byte Granularity........................... - Disable(4 Bursts)
    Last edited by Brother Esau; 01-10-2007 at 12:12 AM.
    SuperMicro X8SAX
    Xeon 5620
    12GB - Crucial ECC DDR3 1333
    Intel 520 180GB Cherryville
    Areca 1231ML ~ 2~ 250GB Seagate ES.2 ~ Raid 0 ~ 4~ Hitachi 5K3000 2TB ~ Raid 6 ~
    Reply With Quote Reply With Quote
  17. 01-10-2007, 12:11 AM #17
    Brother Esau
    Brother Esau is offline
    D.F.I Pimp Daddy
    Join Date
    Jan 2007
    Location
    Still Lost At The Dead Show Parking Lot
    Posts
    5,182
    Quote Originally Posted by Sonic9
    Can be ported to Ultra-D ?

    Na brother, this is for the Expert ONLY!
    SuperMicro X8SAX
    Xeon 5620
    12GB - Crucial ECC DDR3 1333
    Intel 520 180GB Cherryville
    Areca 1231ML ~ 2~ 250GB Seagate ES.2 ~ Raid 0 ~ 4~ Hitachi 5K3000 2TB ~ Raid 6 ~
    Reply With Quote Reply With Quote
  18. 01-10-2007, 12:49 AM #18
    ChaosMinionX
    ChaosMinionX is offline
    Xtreme Cruncher
    Join Date
    Oct 2006
    Location
    Boston, Massachusetts
    Posts
    2,224
    Send a message via ICQ to ChaosMinionX Send a message via AIM to ChaosMinionX Send a message via MSN to ChaosMinionX
    OT, but I see youve found XS Brother Esau Welcome.



    [HeatWare]
    Reply With Quote Reply With Quote
  19. 01-10-2007, 01:30 AM #19
    Brother Esau
    Brother Esau is offline
    D.F.I Pimp Daddy
    Join Date
    Jan 2007
    Location
    Still Lost At The Dead Show Parking Lot
    Posts
    5,182

    Smile

    Quote Originally Posted by ChaosMinionX
    OT, but I see youve found XS Brother Esau Welcome.

    @ChaosMinionX whats up? Prey tell what are you doing with that ASUS board in you're rig

    LOVE THE AVATAR MAN.........YOU LOOK VERY DASHING!!!
    Last edited by Brother Esau; 01-10-2007 at 01:35 AM.
    SuperMicro X8SAX
    Xeon 5620
    12GB - Crucial ECC DDR3 1333
    Intel 520 180GB Cherryville
    Areca 1231ML ~ 2~ 250GB Seagate ES.2 ~ Raid 0 ~ 4~ Hitachi 5K3000 2TB ~ Raid 6 ~
    Reply With Quote Reply With Quote
  20. 01-10-2007, 07:12 AM #20
    Brother Esau
    Brother Esau is offline
    D.F.I Pimp Daddy
    Join Date
    Jan 2007
    Location
    Still Lost At The Dead Show Parking Lot
    Posts
    5,182
    For those of you that have intrest in the Merlin 10/7/06 get on it , its a en completely rock solid stable bad ass bios! Now on the other hand the last release he made on DFI-STREET was the 04/11/06 Bios which I just tried and its not stable and its based off of the 11/19/05 Expert bios which was not great at all!!! But I would recommend using this one in a heartbeat though!

    Actually just Flashed back to 10/7/06 after 4 hours with his newer one.

    Yea just gotta love them dancin Bannanas....
    Last edited by Brother Esau; 01-10-2007 at 07:14 AM.
    SuperMicro X8SAX
    Xeon 5620
    12GB - Crucial ECC DDR3 1333
    Intel 520 180GB Cherryville
    Areca 1231ML ~ 2~ 250GB Seagate ES.2 ~ Raid 0 ~ 4~ Hitachi 5K3000 2TB ~ Raid 6 ~
    Reply With Quote Reply With Quote
  21. 01-10-2007, 09:13 AM #21
    B5I8
    B5I8 is offline
    Xtreme Member
    Join Date
    Nov 2002
    Location
    Hawaii
    Posts
    340
    The links to DL the BIOS do not even work anymore.
    Dell 2405FPW
    Lian Li PC-75B
    PCP&C 510 ASL
    DFI LP UT NF4 SLI-DR Expert
    Opteron 180
    Chilly1 SS Phase Change
    2x512MB Mushkin Redline XP4000
    BFG 7800 GTX 256MB PCI-E
    2xWD 740GD RAID 0
    Maxtor 6B300S0
    Plextor PX-716SA
    Audigy 2 ZS
    Klipsch Promedia Ultra 5.1
    Reply With Quote Reply With Quote
  22. 01-10-2007, 09:59 AM #22
    KingDingeling
    KingDingeling is offline
    Xtreme Member
    Join Date
    May 2006
    Location
    Hannover, Germany
    Posts
    109
    I heard good stuff about this, how does this compare to Tmod's 704-2bta BIOS? Thats what I have rigged right now, I would just like to know the differences.
    CPU: Core 2 Duo T7250 2.0GHz
    RAM: 2x2GB OCZ PC2-5400 CL5
    GFX: Intel GMA X3100
    HDD: 160GB
    Reply With Quote Reply With Quote
  23. 01-10-2007, 10:16 AM #23
    Brother Esau
    Brother Esau is offline
    D.F.I Pimp Daddy
    Join Date
    Jan 2007
    Location
    Still Lost At The Dead Show Parking Lot
    Posts
    5,182
    You mean OCZ Tony's E704-2BT Its much better at least on my board any how!
    SuperMicro X8SAX
    Xeon 5620
    12GB - Crucial ECC DDR3 1333
    Intel 520 180GB Cherryville
    Areca 1231ML ~ 2~ 250GB Seagate ES.2 ~ Raid 0 ~ 4~ Hitachi 5K3000 2TB ~ Raid 6 ~
    Reply With Quote Reply With Quote
  24. 01-10-2007, 11:49 AM #24
    Solarfall
    Solarfall is offline
    Xtreme Guru
    Join Date
    Jun 2006
    Location
    Finland, joensuu
    Posts
    3,527
    Send a message via AIM to Solarfall Send a message via MSN to Solarfall
    any idea whould this work with FX-60, the information whould be very helpful.
    thanks
    Evga X58 sli under cascade
    http://www.xtremesystems.org/forums/...d.php?t=219788
    Evga X58 Sli ultimate overclocking/ overview/ discussion thread
    http://www.xtremesystems.org/forums/...d.php?t=221082


    proud owner of E8600 Q822A435
    Reply With Quote Reply With Quote
  25. 01-10-2007, 11:54 AM #25
    phelan1777
    phelan1777 is offline
    I am Xtreme
    Join Date
    Oct 2005
    Posts
    4,682
    well be it that the DL links are no good..........anyone here that has the zip file still care to share with us newer Exprt owners?
    fermiNow Dave will see FERMI where ever I go
    Quote Originally Posted by jbartlett323 View Post
    So please return to the "Darkside of the Moon" and check your "Pulse" while you wait for the "Animals" that will be "Obscured By Clouds". And watch me wave as I say "Wish You Were Here" in "A Momentary Lapse of Reason"
    Reply With Quote Reply With Quote
Page 1 of 2 12 LastLast
« Previous Thread | Next Thread »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules