Here are my accomplishments after 3 nights with the board. All in all, the Commando behaves a lot like a P5B Dlx. It is a very quick board.

I had to flash the BIOS once after setting VMCH to 2.025 volts messed it up. It is also quite easy to fry your memory. Believe me.

The Hardware Monitor in the BIOS shows massive voltage fluctuation for Vcore and especially Vdimm. I think that all the voltage readings are purely indicative. I did not have time to verify the readings with a mm.

So, here is what you can expect:

1M



8M



32M



PiFast