Take 4: Nvidia 680i SLI mobo in the house. First look downunder.

[dinos22]

i tested TTBT + E6600ES B1 + new 190CFM fan + new PSU (Delta RPS-700-2) from some server heheheh

well results are good....CPU OCs OK but motherboard SuperPI performance is substandard......

CPU OCs the same on this board as P5B Deluxe....i mean same vcore, vdimm, frequencies and all...which is a good thing

~1.38V Load prime 3.6GHz




3.6GHz 32M SuperPI 400MHz on RAM 4-4-4-x
i think B1 stepping is a little slower than B2


3.6GHz 32M SuperPI 550MHz on RAM 4-4-4-12 plus auto (loose subtimings)


3.6GHz 32M SuperPI 550MHz on RAM 4-4-4-8 plus auto (tightened subtimings and voila 20 seconds difference in time )


3.6GHz 32M SuperPI 550MHz on RAM 4-4-4-8 plus auto (tightened subtimings with minimised SPI windows heh....few seconds gain not bad)....i feel like puking looking at these superpi times of course........seriously i've had 13m5xs with a freaking allendale at 3.8GHz and that was only because ram was 1:1 as well otherwise it would have been another 30 seconds faster )


I seriously don't know WTF is going on with this motherboard...........i also did a 3.95GHz 32M....well it crashed on the 24th loop
***3.9Ghz 32M SuperPI 14m 55.547s 434MHz 4-4-4-8



DUAL 32M at 3.825Ghz SuperPI 20m 03-13s 425MHz 4-4-4-8 >>>> i've used same vcore on all runs up to 3.9GHz and that's 1.55v bios......1.5v windows idle and 1.48v windows load.......for some reason anything past 1.55v in bios and the CPU or mobo just didn't like it..... ...i think it's motherboard as i've give this CPU as much as 1.675v with Asus P5B Deluxe without that much of a hassle



3.869Ghz DUAL 32M SuperPI 20m 430MHz 4-4-4-8 (3.9Ghz crash half way....3.88GHz completed but CPUz stuffed up and i couldn't be bothered redoing it)



4014MHz 1M SuperPI is as far as i got tonight.........4030MHz crashed on last loop