Long time no see...NVIDIA 8800GTX testing.

[blind_ripper]

say hipro be sure befor u order LN2 for ure gfx's to check if it coldbugs !
have a little movie here how u can see what the card dos when it coldbugs .
mine his coldbug gos away if i give 1.78vgpu and evap off cascade is around -92°C , be sure to keep the card dry .
if u want to see the movie just ask

[TaPaKaH]

if u want to see the movie just ask

me wants to see the movie

[blind_ripper]

me wants to see the movie

http://s3.photobucket.com/albums/y90...1012007003.flv
sorry for the poor looking image but it whas done with my GSM
and some ice pics , cascade idled for half hour @ -100°C no power to the setup thouge
http://i3.photobucket.com/albums/y90...1012007036.jpg
http://i3.photobucket.com/albums/y90...1012007037.jpg
http://i3.photobucket.com/albums/y90...1012007038.jpg
whas down stairs to eat and thats what happed to the card , worlds first white 8800GTX

[Dynasty]

Nice to see your X6800 still alive after its ln2 session with Crossfire..


661 is decent clocks for an 8800 gtx. If you can push that card with no
vmods on stock cooler to atleast 685-695mhz then you got an good one
as im sure your aiming for atleast 900/2500 for that card......

97.44's with an selected 3D profile does help also....

[hipro5]

Some updates......

This was done on ABIT AW9D-MAX with 381MHz rams at Cas 3-2-2-1 and 1:1



This is on ASUS Striker booted at 420MHz fsb AND 1T....Better....



Now:

This is booted at 425 MHz fsb....AND 3200MHz.....Rams and fsb are 1:1 at 458MHz....



This is booted at 420 MHz fsb....AND 3200MHz.....Rams and fsb are 1:1 at 458MHz...



.....and this is booted at 420 MHz fsb and using 1T...AND 3200MHz.....Rams and fsb are 1:1 at 458MHz..



AGAIN:

This is booted at 425 MHz fsb....AND 3200MHz.....Rams and fsb are 1:1 at 458MHz...



This is booted at 420 MHz fsb....AND 3200MHz.....Rams and fsb are 1:1 at 458MHz



This is booted at 425 MHz fsb....AND 3200MHz.....Rams and fsb are 1:1 at 458MHz....



This is booted at 420MHz fsb....AND 3200MHz.....Rams and fsb are 1:1 at 458MHz....



and this his is booted at 420MHz fsb....AND 3200MHz.....Rams and fsb are 1:1 at 458MHz AND USING 1T....



ONCE AGAIN:

This is booted at 425MHz fsb....AND 3200MHz.....Rams and fsb are 1:1 at 458MHz....



and this is booted at 420MHz fsb....AND 3200MHz.....Rams and fsb are 1:1 at 458MHz...Using 1T....



....and.....

This is booted at 425MHz fsb....AND 3200MHz.....Rams and fsb are 1:1 at 458MHz...



This is booted at 420MHz fsb....AND 3200MHz.....Rams and fsb are 1:1 at 458MHz..



....and the same BUT using 1T.....



hexus-Pi fast booted at 425MHz fsb....AND 3200MHz.....Rams and fsb are 1:1 at 458MHz.



hexus-Pi fast booted at 420MHz fsb....AND 3200MHz.....Rams and fsb are 1:1 at 458MHz....USING 1T....




....IS this the fastest Super-Pi 1M BELOW 4000MHz?.....
Booted at 420MHz 1:1 and 1T...PLUS only Windows tweaks and not Super-Pi tweaked....




I'll be back....

[TaPaKaH]

Thanks for the data

[G H Z]

Thanks hipro, I have some new idea's now

How is droop on your Striker?

[dinos22]

....IS this the fastest Super-Pi 1M BELOW 4000MHz?.....
Booted at 420MHz 1:1 and 1T...PLUS only Windows tweaks and not Super-Pi tweaked....




I'll be back....

george no it's not

you have to be below 12.562 to do that

http://www.xtremesystems.org/forums/...d.php?t=127570

[blind_ripper]

hhhmmm just killed mine
1.78vgpu treu core on box air , whas forgoten to turn back after testing on cascade
started system and it dint give any screen so its good bey 8800GTX for now

[4Qman]

hhhmmm just killed mine
1.78vgpu treu core on box air , whas forgoten to turn back after testing on cascade
started system and it dint give any screen so its good bey 8800GTX for now

dam man, i did this once with a 7800GT but it survived. I feel for you dude

[Revv23]

wow sweet amounts of data there hipro, you have given a whole new idea for me about this nvidia chipset, it looks like it can compete if you know how to play with it right.

Thanks for taking the time to post that all up!

[NiCKE^]

I told you about the bootstraps Hipro5

[dinos22]

it's been said before in a few threads.........424>425MHz FSB is where the strap changes

[hipro5]

george no it's not

you have to be below 12.562 to do that

http://www.xtremesystems.org/forums/...d.php?t=127570

Well......I have to tweak the Super-Pi now......

I told you about the bootstraps Hipro5

Yes and you were right M8....

I'll give some more data later on about Ram timmings and what DDR Modules are best for it....I've tested Fatbodies and the 1000C4 Cellshocks.....
Tip: 4-2-2-4 1T and 1:1 outperformes EVERYTHING on this chipset...
Good old faties - never die - .....

[NiCKE^]

Yes and you were right M8....

I'll give some more data later on about Ram timmings and what DDR Modules are best for it....I've tested Fatbodies and the 1000C4 Cellshocks.....
Tip: 4-2-2-4 1T and 1:1 outperformes EVERYTHING on this chipset...
Good old faties - never die - .....

Hicookie was the one to be right.
And after a couple of heart attacks fatties usually dies
But you're maybe referring to the ram :P

[wedfighter]

crazy RAm u've got there mate
how much vdimm?

[hipro5]

Hicookie was the one to be right.
And after a couple of heart attacks fatties usually dies
But you're maybe referring to the ram :P

When I say "Fatbodies never die" I use it as an idiomatism....I mean that they will be here with as on this mobo too....

@ wedfighter: thanks M8......They are with 2.72Vdimm....

[hipro5]

i disagree, it dies on anything below X6800

I disagree² .... You can work them at 470MHz+ at Cas 4-3-2-4 and 1T...

[dinos22]

Well......I have to tweak the Super-Pi now......

[hipro5]

I disagree again :p

it's no use for an E6600 in my case , that does 4.2ghz air cooled..this ram is a bottleneck..no matter how tight it can go...

*edit*
I have fatties myself corsair pc5400Ul i stil regret that i bought those.

Your disagree doesn't count here coz you have to write it down like this: disagree³

P.S. If they're doing good, I'm buying them at a good price....

[Slipknot]

Hello. What are typical oc-values?

I tried to oc with ATI-Tool. 630/980 seams 2 be stable. 634 are stable 2, but at 635 i got a freeze. oO Is this normal? 990MHz@RAM provids artifacts

630/980 seams 2 be low, or is this normal? Shulda try 2 oc with Rivatuner?

I am using stock air cooling.

[hipro5]

Some updates......






....and 3D SLI on air....





COMPARE 2k1 URL...

I have a problem as for the 2k3 bench......What's the "trick" for it?....





COMPARE 2k3 URL...






COMPARE 2k5 URL...






COMPARE 2k6 URL...





That's for know......I'll be back with more updates soon.....


.

[G H Z]

Hipro,

Tell me the 2K1 secret and I'll tell you the 2K3

[EnJoY]

Hipro,

Tell me the 2K1 secret and I'll tell you the 2K3

Tell me both and I'll tell you another secret....can't promise it'll be useful though.

[k|ngp|n]

Hipro, your fatbodies are smokin man. 1350 shader clocks in that 81.8 01' run?