Guys,

got this mail today:

Bios 13 Final / release bios,

1. To support Conroe-L CPU(FSB800)
2.Modifying memory default voltage at 2V after clear cmos and if user choose DDR2-800 memory, DDR voltage will set on 2V automatically(By SPD ro Manual)。 DDR533/667 are staying on 1.8V (By load optimized default or manual)
3. To support Conroe Extreme (X6800) CPU's Multiplier range from 6 to 31
4. Update CPU micro code to support Kentsfield B3 version
5.Added DRAM timing option "Refresh Cycle Time (tRFC)"
6. Fixing OC Guru DDR2 SDRAM Voltage to DDR2 VTT Voltage
7. Fixing some DRAM performance decreasing issue
8. Add Thermal Control option
9. Fixing OCZ DDR2 1000 boot fail when set it on DDR2 533 issue
10. Fixing External clock over 365MHz, POST shown wrong Host/Memfrequency
11. Fixing CMOS loss all data back to "fail saft model" issue
12. Change AW9D BIOS setup menu color
13. Remove Memory Frequency on post
14 Remove PCI Express slot 2 item in BIOS
DOWNLOAD

Flash on your own risk!