!UPDATE! abit AW9D-Max (retail) arrived

[Nitemare]

I don't believe that its Vfsb can be controled within bios or proggie......It's circuit is plain and simple so don't expect that....

That´s so poor for a mobo at such a value.

I´ve done ur vfsb mod too. To get 5 minutes orthos stable at 400 it needs to get 1,5V vfsb. What do you think it´s safe for 24/7?
Just want to run at 400 24/7.

Greetz!

[hipro5]

That´s so poor for a mobo at such a value.

I´ve done ur vfsb mod too. To get 5 minutes orthos stable at 400 it needs to get 1,5V vfsb. What do you think it´s safe for 24/7?
Just want to run at 400 24/7.

Greetz!

As for me, mobo worths every penny as is......

I've worked with Bad Axe, P5W-DH, P5B-Deluxe, P5W-64, Most of the Gigabytes and NONE of them can't touch it when it's moded.....
P.S. ALL of the mobos moded too.....

ONLY thing I wish is that the 975 chipset could work SLI........

1.45VFSB - 1.5VFSB it's OK for ever on air......
Try to work it with ONLY ONE DDR Module to see if it raise it's fsb.....If yes, then try other timmings/subtimmings for your rams......

[Nitemare]

As for me, mobo worths every penny as is......

I've worked with Bad Axe, P5W-DH, P5B-Deluxe, P5W-64, Most of the Gigabytes and NONE of them can't touch it when it's moded.....
P.S. ALL of the mobos moded too.....

ONLY thing I wish is that the 975 chipset could work SLI........

1.45VFSB - 1.5VFSB it's OK for ever on air......
Try to work it with ONLY ONE DDR Module to see if it raise it's fsb.....If yes, then try other timmings/subtimmings for your rams......

...I´m on water all the way. What ya think is safe for that?

Before I´ve done vfsb I´ve tried what you say but didnt raise just 1 MHz. Tried any timings / subtimings.

My last hope is just finally getting that strap will help raisin´fsb. Dont know what to if it won´t help. Buying 6600 instead of 6300 or buying p5bd.

Don´t think my 6300 is causing me that trouble. It reaches 3200 at stock vcore on p5bd.

Greetz!

[fhpchris]

As for me, mobo worths every penny as is......

I've worked with Bad Axe, P5W-DH, P5B-Deluxe, P5W-64, Most of the Gigabytes and NONE of them can't touch it when it's moded.....
P.S. ALL of the mobos moded too.....

ONLY thing I wish is that the 975 chipset could work SLI........

1.45VFSB - 1.5VFSB it's OK for ever on air......
Try to work it with ONLY ONE DDR Module to see if it raise it's fsb.....If yes, then try other timmings/subtimmings for your rams......

Personally, I find 435 fsb stable (~445ish 1m) rather crappy...

I really need ~445 stable and ~475 1m

does just the vmch droop mod and vfsb really help that much?

[hipro5]

Personally, I find 435 fsb stable (~445ish 1m) rather crappy...

I really need ~445 stable and ~475 1m

does just the vmch droop mod and vfsb really help that much?

Phill gained about 30 - 35MHz more with the VFSB and the "cable mod" as for the VMCH.....

same question, hipro. we need some input please.

From a glance I had, I realy didn't gain much out of it......Maybe coz of the devider used lower than CPU's fsb.....
To be sure though, I'll re-check tomorrow that I'll have more time to play with......
The CPU I now have, is capable of doing 552MHz fsb on an P5B-Deluxe mobo, so I'm sure that it won't ba a CPU fsb limitation....

[zeeke]

Phill gained about 30 - 35MHz more with the VFSB and the "cable mod" as for the VMCH.....

Unmodded, my board did Spi 1mb @425, with cable mod, vfsb and vmch I pass 1mb @ 473,

From a glance I had, I realy didn't gain much out of it......Maybe coz of the devider used lower than CPU's fsb.....
To be sure though, I'll re-check tomorrow that I'll have more time to play with......
The CPU I now have, is capable of doing 552MHz fsb on an P5P-Deluxe mobo, so I'm sure that it won't ba a CPU fsb limitation....

Nice, tell us what you find out hipro