Some of these were with Micron chips, but I'm not sure now. They overclock pretty well for the price and you will be able to overclock them around 960 or even 1000. Probably now they are using Elpida chips.
Some of these were with Micron chips, but I'm not sure now. They overclock pretty well for the price and you will be able to overclock them around 960 or even 1000. Probably now they are using Elpida chips.
.:If It Isn't Broke, Overclock It!:. .:Overclock It Til It Bleeds!:. .:If you can read this, then you aren't "well" Overclocked yet...!!! :.
What about these sticks? TWIN2X2048-6400 XMS2-6400 2048MB 5-5-5-12 2X240 DIMM Black XMS2 They are marked in red, so they are supposed to be excellent for OC. But are they really so good? I can't find any OC info. Which chips are they based on?
C3 and C4 are with Micron, these that you liked are also with Micron, but are not toroughly tested to reach high frequency. They'll probably be as good as C4 model.
.:If It Isn't Broke, Overclock It!:. .:Overclock It Til It Bleeds!:. .:If you can read this, then you aren't "well" Overclocked yet...!!! :.
Ok, i got the same sticks, that V I P E R has.
A-Data DDR800 2x512mb
ELPIDAtwn
E2508AB-GE-E
Right now my pentium 4 doesn`t like to go over 20x210, thatswhy i can`t test my sticks at high frequencies. But i tested it at 3-3-3-4 timings.
3-3-3-4 @ DDR712 (356mhz) @ 2,3V
Not bad to be sure, cause these 2x512mb sticks cost 105$ :P
¤ ASUS P5W DH Deluxe
¤ Intel Core2 Duo E6300 1,86ghz "Allendale"
¤ A-Data 2x512mb DDR800 4-4-4-4
¤ ASUS Ati Radeon X1800XT TOP 512mb
¤ Hiper Type-R 580W
¤ Hitachi Deskstar T7K250 250GB SATAII
¤ LG CD-RW
¤ LiteOn DVD
¤ Thermaltake Bigwater 745 + VGA block
Kit Extreme2 2 x 512 Mo PC6400 HZ résults :
-Bench -> 3.11v max, no more after
-Screen -> i've stop at 3.15v...
http://valid.x86-secret.com/show_oc?id=113616
French Overclockers roxxxxxx
OCM Team addict
3,15V That's nuts, some body tried the 3,3V @ Vdimm mod and his sticks died. But hell 616mhz 4-4-3-8 crazy
My Rig:
Intel Core 2 Duo E6400
2x512mb Micron PC3200 OEM D9DQW "Fatbody"
Biostar TForce P965 Deluxe
MSI/Medion GeForce 6700XL (Cheap )
Chieftec 360W (in search for someting better)
WD 160GB S-ATA
If you get these and have results please let me know.Originally Posted by Caubecari
4-4-3-1Originally Posted by DaWaN
thx
French Overclockers roxxxxxx
OCM Team addict
I know the A-Data test is kinda old but why isn't it up anymore? Changed modules?
What about TeamGroup?! They're pretty nice modules!
I never reported my freqs:
Crucial Ballistix PC6400 2*1GB
2.4v
435mhz
3-2-2-4 (4 is way better then 1 )
530mhz
4-3-2-4
Daily use atm.. 2.25v
3-3-2-4 @ 400mhz
Competition ranking;
2005; Netbyte, Karise/Denmark #1 @ PiFast
2008; AOCM II, Minfeld/Germany #2 @ 01SE/AM3/8M (w. Oliver)
2009; AMD-OC, Viborg/Denmark #2 @ max freq Gigabyte TweaKING, Paris/France #4 @ 32M/01SE (w. Vanovich)
2010: Gigabyte P55, Hamburg/Germany #6 @ wprime 1024/SPI 1M (w. THC) AOCM III, Minfeld/Germany #6 @ 01SE/AM3/1M/8M (w. NeoForce)
Spectating;
2010; GOOC 2010 Many thanks to Gigabyte!
But its not as good as it gets either.Originally Posted by M.Beier
hmmOriginally Posted by Gautam
Im confused?
Did some research with PiFast_thelab (thats NOT HEXUS - its a 20 sec run ) - I got best time with 4 ? :\ - tested 1-2-3-4-5-6-7-8-9-10-11-12
Competition ranking;
2005; Netbyte, Karise/Denmark #1 @ PiFast
2008; AOCM II, Minfeld/Germany #2 @ 01SE/AM3/8M (w. Oliver)
2009; AMD-OC, Viborg/Denmark #2 @ max freq Gigabyte TweaKING, Paris/France #4 @ 32M/01SE (w. Vanovich)
2010: Gigabyte P55, Hamburg/Germany #6 @ wprime 1024/SPI 1M (w. THC) AOCM III, Minfeld/Germany #6 @ 01SE/AM3/1M/8M (w. NeoForce)
Spectating;
2010; GOOC 2010 Many thanks to Gigabyte!
i don't know i someone else asked this but could we get the Command Rates that these are using to reach these speeds or should we assume that all are running 2T with the exception of these:
TWIN2X1024A-5400UL 675MHz 3-3-2-8-1T CM2X512A-5400UL
TWIN2X1024A-6400 800MHz 5-5-5-12-2T CM2X512A-6400
i would like to see what people are getting with both command rates. some sticks may reach a certain speed at 2T while others are able to do the same (at the same timings of course) with 1T. it would help me better to decide which way to go. even if some sticks reach a slightly slower speed but can mantain 1T at the same timings. the benifit of 1T could out do a higher speed at 2T.
XEON 3075 (3.2ghz for now)
Asus P5E
Crucial Ballistix DDR2-800 2gb (stock for now)
HD3850 512mb (715/945 for now)
OCZ Powerstream 520watt
Coolermaster CM Stacker
Hi guys.
maybe you can help me!
I plan to buy an Gigabyte DS4 board an now I am searching a good 2x1GB Kit that runs > 1000 MHz , but should not be too expensive, good would be ~ 230 € .
An you tell me some Kits tha fits my claims?
OCZ Titanium Alpha VX2 PC2-8000's run D9GMH's I got mine to clock at 1200 MHz.
~Mike
Main Rig: Intel Core i7 7700k @ 4.2GHz, 64GB of memory, 512GB m.2 SSD, nVidia GTX1080Ti
NAS: QNAP TVS-1282, 8 x 4TB WD Golds(Main Storage Pool), 4 x 960GB M4 Crucial (VM Storage) , 2 x 512GB M.2 Caching
Private Cloud: 4 Nodes (2 x Xeon 5645, 48GB DDR3 ECC/REG, 1 x 1TB HDD, 1 x 960GB SSD/Each)
Distributed Encoding Cloud: 4 Nodes (2 x Xeon x5690, 24GB DDR3 ECC/REG, 1 x 128GB SSD/Each)
Feedback
EBAY:HEAT
I'm running two 1GB sticks of GeIL GX22GB6400DC in dual channel mode, and I've tested the three following timings.
These tests were done on stock cooling with a AMD Sempron 3000+ (1600MHz) (AM2) at various speeds.
I've looked into GeIL GX21GB6400DC overclocking, but it seems to be a different chip, because I had no
luck increasing this significantly over stock timings/speeds.
@800MHz (CPU 2000Mhz @ 250 FSB, CPU/5, 2.2v)
CAS Latency (TCL) 4
Min RAS# Active Time (TRAS) 10
RAS Precharge (TRP) 3
RAS# to CAS# (TRCD) 4
Row to Row Delay (TRRD) 4
Row Cycle Time (TRC) 14
CMD-ADDR (1T/2T) 2
@880MHz (CPU 2200MHz @ 275 FSB, CPU/5, 2.2v)
CAS Latency (TCL) 4
Min RAS# Active Time (TRAS) 12
RAS Precharge (TRP) 4
RAS# to CAS# (TRCD) 4
Row to Row Delay (TRRD) 4
Row Cycle Time (TRC) 18
CMD-ADDR (1T/2T) 2
@960MHz (CPU 2400MHz @ 300 FSB, CPU/5, 2.25v)
CAS Latency (TCL) 5
Min RAS# Active Time (TRAS) 12
RAS Precharge (TRP) 4
RAS# to CAS# (TRCD) 4
Row to Row Delay (TRRD) 4
Row Cycle Time (TRC) 18
CMD-ADDR (1T/2T) 2
Just added a third timing set that works (Ran through 3DMark01SE without a hitch), I've yet to find if it's entirely stable tho.
Here's some SuperPI results.
What can I say, not the fastest CPU out there
Holding off until dual core 65nm from AMD comes along.
Rakessh
-----
AMD Sempron Xp3000+ 1.6Ghz@2.2GHz
MSI K9N Ultra-2F AMI BIOS v3.22 (beta)
GeIL 2x1GB DC PC6400
Asus GeForce 7600GT 256, 560@600/1400@1600
Last edited by Rakessh; 09-15-2006 at 12:44 PM.
I'm going to try going over 1000MHz with my GeIL chips, but currently I cannot set CPU/4 ratio at FSB that brings it above 900MHz as the divider goes to CPU/5 if I do. I will have to wait for a new BIOS that may allow me to set the cpu/memory divider completely manually. Or if anyone has any tip on how to get it to run CPU/4 it will be much appreciated.
Rakessh
-----
AMD Sempron Xp3000+ 1.6Ghz@2.2GHz
MSI K9N Ultra-2F AMI BIOS v3.22 (beta)
GeIL 2x1GB DC PC6400
Asus GeForce 7600GT 256, 560@600/1400@1600
1GB kit (512MBx2)BL2KIT6464AA663 DDR2 PC2-5300 3-3-3-12 UNBUFFERED NON-ECC DDR2-667 2.2V 64Meg x 64
32m stable 475Mhz 4-4-3-8 1:1 2.25v
Asus P5B Deluxe ~ E6700 @ 3.6 360x10 / 1.35v ~ Swiftech Water
2x1Gb Crucial Ballistix 4-4-4-4 1:1 ~ Evga 8800GTX
WD Raptor 2x74gb(Raid0) ~ OCZ GX 600w ~ Lian Li V1000B
I"ve got Kingmax DDR 800. On the chips is 25DF.
They do DDR 667 @1.8 4-4-4-12 , now im testing 667- 3-4-3-12 @1.9v
Last edited by ex.treme; 10-26-2006 at 02:02 PM.
o/c und u/c is my fun
Undervolting rulezz. Gigabyte Z68XP-UD4+ i2500k@3GHz@1.000v+ next extra low voltage settings, CM Hyper 212+, Gigabyte HD7750 2GB DDR3+Sapphire 7750 Oc 1GB DDR5, 2x4GB Corsair DDR3 1600@1.3v, Samsung 1TB-F3, Thermaltake Armor Jr.,2x120 Revoltec,Zalman Fan mate2, FSP Aurum 400w GOLD, 59w idle. WCG 2x gpu load- 85w,
Seti@home benchmark
Ha ha overcrash, 3.15v. Do the sticks glow red under load?
<----- REST IN PEACE, KIT. 1993-2007.
What chips do the Corsair PC6400 C4 Rev 1.2 sticks use? And what are their characteristics?
nm: I ripped of the heatspreaders. They are D9GMH's.
Last edited by jagt; 11-17-2006 at 01:51 PM.
Super talent T800UX2GC5(5-5-5) on newegg does not use micron D9
http://www.newegg.com/Product/Produc...82E16820609027
different set but it's easy to get confused since their numbers are the same...
Q6700 @ 3.6 1.475v
Asus P5Q-E
2GB Team Group DDR2 667 3-3-3-8 @ 900 4-4-4-8 @ 1.9v
Visiontek HD4870
4x 80Gb Hitachi Sata2 HDD's (Raid 0)
1x 750Gb Seagate HDD (backup/Vista boot)
1x 500Gb WD HDD (Random Stuff)
Corsair TX750W
Hmm what chips are in Corsair CM2X1024-6400 sticks?
I´m getting two of those nextweek.
The new 6400C4 uses promosOriginally Posted by BulldogPO
Intel Core I7 920 @ 3.8GHZ 1.28V (Core Contact Freezer)
Asus X58 P6T
6GB OCZ Gold DDR3-1600MHZ 8-8-8-24
XFX HD5870
WD 1TB Black HD
Corsair 850TX
Cooler Master HAF 922
Bookmarks