Lian-Li PC-343B

[ashoof]

Lian-Li PC-343B
this is Lian-li PC343b with 1x120.3 1x240 3x120
just waiting for my GPU bloks and good to go

[[XC]Atomicpineapple]

You sure you got enough rads in that? I see 3 120.1s and a 120.3 or maybe a 120.2. Does look good though, and 1 hell of a system you'll have there!

[ashoof]

You sure you got enough rads in that? I see 3 120.1s and a 120.3 or maybe a 120.2. Does look good though, and 1 hell of a system you'll have there!

well look at it this way in total i have 8x 120.1 RADs looooool

[Ten]

Is pa 120.3 +shorud fitting in the front on 343 without modding it?

[ashoof]

Is pa 120.3 +shorud fitting in the front on 343 without modding it?

well i have this fan infront of the rad pa120.3

[IanY]

Congratulations on your beautiful build. I see that you chose the Apogee block for your Kentsfield I have been deliberating for some time now. Are you setting the system up in a single loop or two loops? It looks like a single loop to me. And I see that you made a choice of a dual D5 pump system. I see 1/2" ID 3/4" OD Tygon tubing. What model is that 240 radiator? BI GTX? The rest are definitely Thermochill. Good choices. Well done!

Are you based in the US? If so, where did you find your accessories for the 343B ? I can find that lovely case but cannot for the life of me find the accessories, especially the PA120.3 radiator mount, the top double radiator adapter and the front bay adapters. Also, are you going with 4 more raptors in another front bay HDD carrier or is that a plexiglass window in front? Maybe that's space for yeat another 120! lol

[Doubage]

IanY, you can get parts here: http://www.pc-look.com/boutik/defaul...68&language=en

Very nice setup

It reminds me of another 343B comming up

[IanY]

Thanks Doubage. Once again, the UK has it all and the US has none

[IanY]

Is there a way to remove that Lian Li name plate from the HDD adapter? lol Mucks up an otherwise extremely classy case lol

What reservoir is that? Don't tell me that its an EK?

[Movieman]

So you had to make me drool all over the keyboard while I'm having my coffee!
VERY nice build. I've been looking at that case for months.
Congrats and good luck with it!

[ashoof]

Congratulations on your beautiful build. I see that you chose the Apogee block for your Kentsfield I have been deliberating for some time now. Are you setting the system up in a single loop or two loops? It looks like a single loop to me. And I see that you made a choice of a dual D5 pump system. I see 1/2" ID 3/4" OD Tygon tubing. What model is that 240 radiator? BI GTX? The rest are definitely Thermochill. Good choices. Well done!

Are you based in the US? If so, where did you find your accessories for the 343B ? I can find that lovely case but cannot for the life of me find the accessories, especially the PA120.3 radiator mount, the top double radiator adapter and the front bay adapters. Also, are you going with 4 more raptors in another front bay HDD carrier or is that a plexiglass window in front? Maybe that's space for yeat another 120! lol

thank you Iany
ill try the inovitec G-flow for cpu block and see how is the flow going and how much i would lose performance over apogee if i not then ill switch back to apogee all my set up is from UK ill be changing the the front hdd holder with a better one i think it is original Lian-li part by the way and yes it is a single loop i recon with 2 d5 and all this RAD i should have no problem and agine if not i can always go 2 loops
and here you can find most of the PC-343b stuff
http://www.microplex.no/product.aspx?pid=PC343B
and this what would i go for the 8800GX block

[Doubage]

Thanks Doubage. Once again, the UK has it all and the US has none

Yes I had to have my parts shipped across the pond

[IanY]

I still don't see the top radiator mount being sold at pc-look.com.

And Microplex ships to the US? I thought they refuse to ship outside Norway.

[Doubage]

I still don't see the top radiator mount being sold at pc-look.com.

Microplex has them as well as here in the US: http://www.performance-pcs.com/catal...ducts_id=21047

[IanY]

Yes, indeed. But that was not what I was talking about. I was referring to the adapter for the top mounting of the radiator on the ceiling of the case. Performance PCs does not have that, neither does PC-Look. I called Performance PCs and I was basically told the accessories are hard to get.

If I can find those, I'm going to have both a PC-343B and a MM U2-UFO Optimax! lol Maybe I should stack them and make it into a stone hench monument! Decisions... which will have Intel and which will have AMD.. hmmm lol

[ashoof]

Yes, indeed. But that was not what I was talking about. I was referring to the adapter for the top mounting of the radiator on the ceiling of the case. Performance PCs does not have that, neither does PC-Look. I called Performance PCs and I was basically told the accessories are hard to get.

If I can find those, I'm going to have both a PC-343B and a MM U2-UFO Optimax! lol Maybe I should stack them and make it into a stone hench monument! Decisions... which will have Intel and which will have AMD.. hmmm lol

i was about to go U2-UFO but after seeing this lian-li i like it very much
and there is alot of acsseories for it and the quality of lian-li

[IanY]

Ashoof,

So, did you get your accessories from Microplex? Do they really ship out? I cannot find the radiator adapter plate for the ceiling of the case.

[ashoof]

Ashoof,

So, did you get your accessories from Microplex? Do they really ship out? I cannot find the radiator adapter plate for the ceiling of the case.

well i am doing it throw this www.vadim.co.uk
thay are the one who is bulding this for me

[Big SturL]

Ahh, Microplex<3 Alegedly, they sent the speccs they wanted to Lian Li, and LiLi made it happen. Fun to see a "Norwegian" case here

[CLEANER]

Yes, indeed. But that was not what I was talking about. I was referring to the adapter for the top mounting of the radiator on the ceiling of the case. Performance PCs does not have that, neither does PC-Look. I called Performance PCs and I was basically told the accessories are hard to get.

Nice rig!

I'm fixing to start building on one of these next month. I called around and most of the accessories for the 343B won't be over on this side of the pond till around the end of Jan. Some have one or two, like performance pc, but none have all the accessories yet over here, and none have the ones most of us want.

i've been drooling over these for a month now. I think by the time Feb. comes around we ought to be able to get everything over here in the u.s.a.

[ashoof]

group buy ..??maybe

[CLEANER]

group buy ..??maybe

good luck... i can't get any website which sells these in Europe to even answer an email from over here, much less discuss a purchase.

[ashoof]

did you try www.vadim.co.uk i am sure thay have it at least where i am doing mine

[Big SturL]

good luck... i can't get any website which sells these in Europe to even answer an email from over here, much less discuss a purchase. Which is unfortunate, but obvious, if they don't want to do busines with us, why should they bother to answer emails?

You have talked to Microplex, yes?

[CLEANER]

did you try www.vadim.co.uk i am sure thay have it at least where i am doing mine

Yes, no answer back from email contact.

You have talked to Microplex, yes?

Yes, same results as above.

no worries ppl, i'm resolved to waiting till they are here in u.s.a., besides, i need the time to get all my other hardware decided on, and ordered... i'm in no hurry.

sorry for straying off thread ashoof, you have a wonderful rig there. I know what you are feeling about this case, i feel the same way... and i am also getting much of the same hardware you have, so it's nice to see what mine has the potential for.

Have fun with it!