Intel Core Temperature Monitor plugin for MBM5 (WinXP) - download now!

[Viss]

Got it working for now. Cores show 0 or 71 with mach.

[freecableguy]

High / low page doesnt work, it just shows the curent temp for all high/low/avg

the log also

log functions and high/low are disabled for testing. they will included in final version.

[The Nemesis]

Is this 975 & 965 only or will it work on 680i?

[Millyons]

log functions and high/low are disabled for testing. they will included in final version.

man this is awsome, that will be dope, although even with the new file u sent me i still get core #1 temps on both sensors, still no core #0 temps

[freecableguy]

Is this 975 & 965 only or will it work on 680i?

motherboard independent. just requires a CPU based on Intel Core technology (Yonah, Merom, Conroe, Allendale, Woodcrest, Kentsfield, Clovertown, etc)

-FCG

[MadMikeSS]

Ok, so this all being done for the C2D chip, anyone know a site where I can find a config setup for my Gigabyte GA-965P-S3?

[freecableguy]

I still need the guys with the quad cores to test and post up. My quad core is not installed right now.

[Supertim0r]

im in for quad test...drop me an email

Motherboard Monitor 5.3.7.0 is lastest ?

[GnomeTank]

Out of curiosity, is there an updated MBM motherboard list or something? If not, what should I tell it my 680i is? Or will it even work with the 680i? :P

[Hassan]

I have a Kent and a Clovertown setup

[Millyons]

Out of curiosity, is there an updated MBM motherboard list or something? If not, what should I tell it my 680i is? Or will it even work with the 680i? :P

no there is no updated MBM, but i Might work on any newer board, it all depends what monitoring chip is used, only thing is that it probably has to be adjusted to show right values and it takes some time figuring out what values are witch, when i set it up for P5BDlx i had to adjust all voltages, like 12v rail was showing 3v

[powerBar]

Ok, so this all being done for the C2D chip, anyone know a site where I can find a config setup for my Gigabyte GA-965P-S3?

MBM5 on the S3 wolud be great - please post a link if you find some config files. Btw. I remember someone here on XS posting to have (D)S3 configured with MBM.

[Millyons]

MBM5 on the S3 wolud be great - please post a link if you find some config files. Btw. I remember someone here on XS posting to have (D)S3 configured with MBM.

if i have time later on today ill post how to make MBM work on any board (if its possible) its really not hard just takes time

[lawrywild]

Just tested your final version Kris, but it shows Core 0 - 0'C Core 1 - 0'C

[powerBar]

if i have time later on today ill post how to make MBM work on any board (if its possible) its really not hard just takes time

That'd be awesome! I have mbm5 installed on all of my pcs but only on my latest addition (gigabyte s3) refuses to cooperate.

[funkflix]

Tested it on my P5B now, but i get some wired results here too. Don't know if i installed it correctly, but i think so!



82°C + 22°C and not showing it in the dashboard?

Edit: 22°C should match Core 1, it is the same temperature on CoreTemp.

[freecableguy]

Just tested your final version Kris, but it shows Core 0 - 0'C Core 1 - 0'C

probably a driver load issue. i changed it from hardcoded to API read. can you give me the full path to you drivers directory? Should be something like "C:\WINDOWS\system32\drivers"

-FCG

[freecableguy]

Tested it on my P5B now, but i get some wired results here too. Don't know if i installed it correctly, but i think so!



82°C + 22°C and not showing it in teh dashboard?

my plugin has absolutely nothing to do with dashboard display. make sure you have expanded the dashboard enough for it to show (or it could be UNDER one of the other tiles - check it out). those temperatures are wild. run Core Temp on your system and see what it reports. Also, please tell me what OS you are running (with what SP) and your CPU type.

[funkflix]

my plugin has absolutely nothing to do with dashboard display. make sure you have expanded the dashboard enough for it to show (or it could be UNDER one of the other tiles - check it out). those temperatures are wild. run Core Temp on your system and see what it reports. Also, please tell me what OS you are running (with what SP) and your CPU type.

Ok, found a Bug here! Under load the Core 1 reading starting to work, but on idle it goes up to 8x°C. I'm running XP Prof. SP2.

[freecableguy]

Ok, found a Bug here! Under load the Core 1 reading starting to work, but on idle it goes up to 8x°C. I'm running XP Prof. SP2.

that's definately good to know. the strange thing is that the code has nothing to do with load or cooling or anything. the driver simply retrieves the data and passes it to the plugin which passes it to MBM5. What exact does the 8x read say? if its greater than 85 then something is definately wrong as 85 is the max that should be reportable (anything greater would mean that the DTS sensor is a negative number...)

-FCG

[funkflix]

that's definately good to know. the strange thing is that the code has nothing to do with load or cooling or anything. the driver simply retrieves the data and passes it to the plugin which passes it to MBM5. What exact does the 8x read say? if its greater than 85 then something is definately wrong as 85 is the max that should be reportable (anything greater would mean that the DTS sensor is a negative number...)

-FCG

It changes between 83 - 85°C. CoreTemp reports 21°C for this Core.

Edit: Sometimes the temperature in task switches to the correct 21°C. Maybe one time in 5 minutes, but then it goes back to the 85°C. Anyway, thanks for ur effort, i'm at work now, be back in a few hours.

[lawrywild]

Kris,

MBM Update 2 + Coretemp plugin =



I'm getting a strange vcore value coming out?

pcprobeII and everest = 1.45v but still, awesome work

[Millyons]

i got the same thing happening for the "normal" cpu temp not the dts, its a mbm thing for sure, my normal temp goes 10-15c higher than it should

[lawrywild]

? I made MBM report cpu temp 18degrees higher so it would match coretemp..

[Millyons]

the log works now, but i dont have time to test for the "inacurate high temp", but even with the newest version im still getting both sensors reading the core#1 temperature