1Ghz 8800GTX w/ 5358MHz X6800

[Zeus]

Wow!

Kingsize score and magic hardware! 1000/1200 on the gfx is not too shabby either.

Has got to be 100K easy with SLI.

Congrats on WR single card.

[trans am]

Kinc, what speed/timings is your ddr2 running at? Just curious because nobody has mentioned it and I didn't see screens.

nice job btw

[Kinc]

What a beautiful x6800, but don't you have a spare kentsfield for 3dm06?

1004MHz. on the core is impressive too ... DH will be enormeous

We have four

what Vcore on that 5.3-5.4G run ?
got pics of the rig?


too sad AirBaltic does not have cheap tickets to Sweden

1.92V. I have a few pics of the rigg on my memory card, will upload em as soon as I can find my card reader

[massman]

We have four

Scaling to 5GHz. benchstable ?

[G H Z]

Crazy, very very fast kinc. Paired up with a set of cards things will no doubt get even more interesting.

[Kinc]

Scaling to 5GHz. benchstable ?

One of em did 4800MHz in the cputest of 06 scoring 7k with the old 2.5" mousepot and low voltage. So with the rev3 pot I think 5GHz is possible

[massman]

Hardware at DreamHack Winter 2006

Processors:
Intel Core 2 Extreme ”Kentsfield” QX6700
Intel Core 2 Extreme ”Conroe” X6800

Motherboard:
Intel Bad Axe 2 i975X
ASUS nForce 680i Striker Extreme
ASUS P5W64 Professional
ASUS P5W DH Deluxe i975x

Graphics card :
2x ASUS Geforce 8800 GTX SLI
1x XFX Geforce 8800 GTX

Memory:
2x Corsair DDR2 PC8888C4DF Dominator
4x Corsair DDR2 PC5400UL (d9 fatbody)
2x Corsair DDR2 PC8000UL (d9 fatbody)
2x Corsair DDR2 PC8500C5 EPP

Cooling:
Mousepot Rev.3 (CPU cooler made from solid copper for liquid nitrogen)
Mousepot Rev.2 GPU (GPU cooler made from solid copper for liquid nitrogen)
A total of 100 liters of liquid nitrogen (LN2)

=> You guys will have lots of fun, I guess

[mrhelix]

Shocked score!!!
It's very extreme card ,but anyone know its power assumtion ?

[k|ngp|n]

Very nice single card guys.
Took 6 chips to find that one eh? All b1's? How do you tell the week on the chip btw?? The SLI numbers with that power will be

[DeDaL]

Fantastic results, Congrats
Approximately how much liters of nitrogen you spend Kinc ?

[JAG87]

increadible...

i can see G81 being a massively overclocked G80 with 1GB GDDR4 and TEC/air cooling. or just a shrink to 80nm for less heat...

maybe 700 or 750 mhz? that should pull the pants off R600...

[Kinc]

Very nice single card guys.
Took 6 chips to find that one eh? All b1's? How do you tell the week on the chip btw?? The SLI numbers with that power will be

4 the rest is qx6700. It is a part of the batchnr. L617A, that is a W17.

Fantastic results, Congrats
Approximately how much liters of nitrogen you spend Kinc ?

For this session maybe 20 liters.

[Kinc]

ah
perhaps you can confirm wheter this theory hold it's ground or not

L6XX latest week is better
XXX lower is better

i asume about the week is bs?

Well a newer batch should not be worse then the one it proceds. Intel is always struggeling with optimizing the sillicone. W27/31 is probably the best overclockers.

[Kinc]

what Vcore on that 5.3-5.4G run ?
got pics of the rig?


too sad AirBaltic does not have cheap tickets to Sweden

It is messy but it works

[Lightman]

It is messy but it works

Very nice mess indeed

BTW this POT is really huge!!

[TaPaKaH]

can I ask sth:
(may be you don`t want to tell): what`s the diameter of the pot ?

[zbogorgon]

can I ask sth:
(may be you don`t want to tell): you're all so into new rev. of mousepot(kingpin and you), that is so much better than the old one, so what's the secret ?

[Overklokk]

Kinc i need help

Tested one of my 8800gtx on cascade today and som strange thing is happend.

847/1200 is 3d stable @ 1,55/2,06v only -50c (this give 901fps nature)

850 on core is no go even with -80c and 1,75v....... cant start any 3d at 850 at all. it just freeze the hole computer

Any tips?

[rjw]

had a similar problem, but just with single phase.

My solution was to lower the voltage. Seemed as if there was overvoltage protection, plus a lot of droop as well (xfx 8800 gtx)

Also my mem voltage, if set too high will cause a similar problem. It's like the card is telling the software that it's a no go.

Strangely, after things began to work and I upped the voltage, I ended up back at the same voltages as when the card wouldn't work.

I've seen it happen in the middle of a bench as well. frame rate fell off drastically once the card went into safe mode or something.(right near 1.75v)

these cards are in need of a v-droop mod. I set 1.67v to get 1.55 minimum. the gpu voltage is all over the place....so far keeping gpu at or above 1.5v and mem at 2.16v, I got 810/1220 and a single card score of 15,565 (w/ E6600 @ 4.4) I am in dire need of a better cpu and/or cascade on the socket.

BTW Kinc...nice job

[Kinc]

Kinc i need help

Tested one of my 8800gtx on cascade today and som strange thing is happend.

847/1200 is 3d stable @ 1,55/2,06v only -50c (this give 901fps nature)

850 on core is no go even with -80c and 1,75v....... cant start any 3d at 850 at all. it just freeze the hole computer

Any tips?

What bios does your card have? It is printed on a sticker attached to the pcb.

[guess2098]

1st X6800 to test a week 17 same batch as the one I had before. Only slightly more stable. Going to test all on ln2 during the weekend as the result will differ on lower temps.

X6800 @ 4653MHz

compete with you and Kingpin is like Via vs Intel hahaha
damn nice chip man
i am starting LN2 next time hehehe

almost same speed compare ~4.6G, 900 vs 990



your game 1 is lower than mine but game 2 3 4 are faster.

eeee, i hope we can meet sometime (all the crazy ocer) XD

[massman]

GT1 = raw cpu power + luck to have a good run.

Your GT 2-4 are slower because of the lower gpu clocks + lower bus speeds (although you did a great job coming so close to his score)

[Viss]

Great single card results. Car low can vary up to 40 fps (if not more on these speeds) at the exact same clocks.

[Kinc]

Started testing SLI today. CPU is only on air since I'm out of LN2. On the way to Dreamhack tomorrow I will pickup 60 liters were I will be joining crotale for a few days of extreme fun!

http://service.futuremark.com/compare?2k3=5077017

[M3kk]

Hm.. nice..