Quote Originally Posted by daimaah
If you're using the Intel SATA ports, then it won't show you the SATA drives in that JMicron screen.

I have a newbie question though. I have Intel C2D E6300 and some Corsair RAM, TwinX 2x512 5400 C4 (675 MHz). I'd like to know how to overclock it slightly so that my memory will run in sync with the processor (now it runs in 4:5 ratio, I think, processor at 266 and memory at 333). I'd like to run both in 333. The problem is that when I change the settings in BIOS and save, I just get a blank screen and nothing happens. I have changed the CPU Frequency to 333 and DRAM Frequency to DDR2-667. I've also tried "locking" the PCI-E Frequency to 100 MHz and PCI Clock to 33.33 MHz, but that doesn't change a thing. I'm only looking for a very small overclock, for now and I can't even get that to work.
You have to change DRAM frequency to DDR2-533 (1:1). Setting DDR2-667 you're giving setting a 4:5 FSBRAM ratio, which means you mem is actually running at 500mhz :o

Also, you may have to increase your vmch to 1.3 or 1.35v.